Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 41
Question 400
Network review: A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. “Try to ARP for an IPv6 address rather than use Neighbor Discovery” would violate the requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.
A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. “Configure a link-local next hop without egress interface scope on a multi-interface router” would violate the requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.
Incorrect Answers
A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. “confirm the repair by checking that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Confirm that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.
A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. “collect targeted evidence to inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Confirm that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.
“configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop” is the controlled implementation, not an unsafe workaround. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Confirm that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.
Question 401
Consider this operational failure: An IPv6 campus has local /64 networks and needs a gateway of last resort for external IPv6 destinations. What should the administrator implement first?
Explanation
Correct Answer
The action 'Configure ipv6 route ::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.' directly addresses the ipv6 default route requirement in this situation: An IPv6 campus has local /64 networks and needs a gateway of last resort for external IPv6 destinations. The relevant network mechanism is that iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate. A successful change should show that show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred. To distinguish a genuine correction from a superficial change, inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity.
Incorrect Answers
“Disable IPv6 routing on the router while keeping a written static::/0” would not meet the requirement. Instead, configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
“Replace the default route with a /128 host route and expect all destinations to match” does not implement the control that the facts call for. Instead, configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
“Assume the IPv4 default route automatically handles IPv6 packets” would not meet the requirement. Instead, configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
Question 402
While troubleshooting 'An IPv6 campus has local /64 networks and needs a gateway of last resort for external IPv6 destinations.', which underlying protocol rule should guide the decision?
Explanation
Correct Answer
IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate. Show ipv6 route shows S::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred.
Incorrect Answers
The choice “An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there” concerns ospf passive lan interface; it does not resolve the stated requirement. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
“OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost” pertains to ospf cost, not the deciding condition here. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
The choice “An OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency” concerns ospf duplicate router ids; it does not resolve the stated requirement. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
Question 403
Which measurable result should be checked before closing this ticket: An IPv6 campus has local /64 networks and needs a gateway of last resort for external IPv6 destinations.
Explanation
Correct Answer
The observation 'show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred.' specifically demonstrates a successful outcome for ipv6 default route in this case: An IPv6 campus has local /64 networks and needs a gateway of last resort for external IPv6 destinations. That observation tests the underlying mechanism that iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to configure ipv6 route ::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop. If it fails, inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity. to isolate the remaining defect.
Incorrect Answers
“Show ip ospf shows distinct router IDs on all routers, and stable FULL neighbors exchange expected LSAs” pertains to ospf duplicate router ids, not the deciding condition here. Show ipv6 route shows S::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred.
“Show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN” pertains to ospf passive lan interface, not the deciding condition here. Show ipv6 route shows S::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred.
“Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test” pertains to ospf cost, not the deciding condition here. Show ipv6 route shows S::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred.
Question 404
Before modifying more devices to address 'An IPv6 campus has local /64 networks and needs a gateway of last resort for external IPv6 destinations.', which diagnostic evidence is most relevant?
Explanation
Correct Answer
The investigation 'Inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity.' examines the variables most likely to explain ipv6 default route in this situation: An IPv6 campus has local /64 networks and needs a gateway of last resort for external IPv6 destinations. Those checks are directly tied to the behavior that iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate. The engineer can correlate this evidence with the expected outcome that show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred. and decide whether to configure ipv6 route ::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
Incorrect Answers
“Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity” pertains to ospf cost, not the deciding condition here. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
“Inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables” pertains to ospf passive lan interface, not the deciding condition here. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
“Inspect show ip ospf, neighbor identities, logs about duplicate IDs and the OSPF process restart state” pertains to ospf duplicate router ids, not the deciding condition here. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
Question 405
A change board considers the issue 'An IPv6 campus has local /64 networks and needs a gateway of last resort for external IPv6 destinations.'. Identify the TWO decisions that should be rejected. Select TWO answers.
Explanation
Correct Answer
“Assume the IPv4 default route automatically handles IPv6 packets” would violate the requirement.
“Replace the default route with a /128 host route and expect all destinations to match” would violate the requirement. The appropriate control instead is to configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
Incorrect Answers
“Confirm the repair by checking that show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred.
“Collect targeted evidence to inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred.
“Configure ipv6 route ::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop” is the controlled implementation, not an unsafe workaround.
Question 406
A network operator receives this ticket: A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing. Which configuration is best suited to the reported issue?
Explanation
Correct Answer
Configure ipv6 route ::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop. Confirm that iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate. If the result fails, inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity.
Incorrect Answers
A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing. “Replace the default route with a /128 host route and expect all destinations to match” does not implement the control that the facts call for. Instead, configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing. “Disable IPv6 routing on the router while keeping a written static::/0” would not meet the requirement. Instead, configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing. “Assume the IPv4 default route automatically handles IPv6 packets” would not meet the requirement. Instead, configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
Question 407
Which network-layer or protocol behavior most directly explains the result in this case: A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing.
Explanation
Correct Answer
IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate. If this test fails, inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity.
Incorrect Answers
A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing. The choice “an OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there” concerns ospf passive lan interface; it does not resolve the stated requirement. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing. The choice “an OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency” concerns ospf duplicate router ids; it does not resolve the stated requirement. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
The choice “oSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost” concerns ospf cost; it does not resolve the stated requirement. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
Question 408
After correcting 'A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing.', which observation is the strongest evidence that the specific requirement is met?
Explanation
Correct Answer
IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate. Configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
Incorrect Answers
“Show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN” pertains to ospf passive lan interface, not the deciding condition here. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
“Show ip ospf shows distinct router IDs on all routers, and stable FULL neighbors exchange expected LSAs” pertains to ospf duplicate router ids, not the deciding condition here. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
“Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test” pertains to ospf cost, not the deciding condition here. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
Question 409
An operator is triaging the issue 'A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing.'. What should be inspected to isolate the actual cause?
Explanation
Correct Answer
Inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity. IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
Incorrect Answers
The choice “inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables” concerns ospf passive lan interface; it does not resolve the stated requirement. Inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity.
The choice “inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity” concerns ospf cost; it does not resolve the stated requirement. Inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity.
The choice “inspect show ip ospf, neighbor identities, logs about duplicate IDs and the OSPF process restart state” concerns ospf duplicate router ids; it does not resolve the stated requirement. Inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity.
Question 410
For this incident: A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
“Assume the IPv4 default route automatically handles IPv6 packets” would violate the requirement. The appropriate control instead is to configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing. “Replace the default route with a /128 host route and expect all destinations to match” would violate the requirement. The appropriate control instead is to configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.
Incorrect Answers
“collect targeted evidence to inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
“confirm the repair by checking that show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
“configure ipv6 route ::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop” is the controlled implementation, not an unsafe workaround. Confirm that iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 39 - 10 Questions (Last Reviewed 10-Oct-2026)
- Cisco 200-301 Practice Test 40 - 10 Questions (Last Reviewed 09-Oct-2026)
- Cisco 200-301 Practice Test 41 - 10 Questions (Last Reviewed 08-Oct-2026)
- Cisco 200-301 Practice Test 42 - 10 Questions (Last Reviewed 07-Oct-2026)
- Cisco 200-301 Practice Test 43 - 10 Questions (Last Reviewed 06-Oct-2026)
