Cisco 200-301 Practice Test 42 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 42

Question 410

For this incident: A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this routed path, collect targeted evidence to inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity.
  2. For this routed path, assume the IPv4 default route automatically handles IPv6 packets.
  3. For this routed path, replace the default route with a /128 host route and expect all destinations to match.
  4. For this routed path, confirm the repair by checking that show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred.
  5. For this routed path, configure ipv6 route ::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.

Explanation

Correct Answer

B:

“Assume the IPv4 default route automatically handles IPv6 packets” would violate the requirement. The appropriate control instead is to configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.

C:

A dual-stack branch forwards IPv4 internet traffic but IPv6 clients fail because its upstream IPv6 default route is missing. “Replace the default route with a /128 host route and expect all destinations to match” would violate the requirement. The appropriate control instead is to configure ipv6 route::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop.

Incorrect Answers

A:

“collect targeted evidence to inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.

D:

“confirm the repair by checking that show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.

E:

“configure ipv6 route ::/0 to a reachable IPv6 upstream gateway or correctly scoped link-local next hop” is the controlled implementation, not an unsafe workaround. Confirm that iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.

Question 411

An engineer must resolve the following situation: Two connected routers have matching IP addressing but no OSPF neighbors after the interface subnet was omitted from network statements. Select the most appropriate solution.

  1. Enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.
  2. Assume an OSPF process ID must be identical across neighbors for adjacency.
  3. Put the transit peers in different OSPF areas without a correct ABR design.
  4. Configure a network statement that matches no local transit interface.

Explanation

Correct Answer

A:

The action 'Enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.' directly addresses the ospf process activation and network statement requirement in this situation: Two connected routers have matching IP addressing but no OSPF neighbors after the interface subnet was omitted from network statements. The relevant network mechanism is that an OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. A successful change should show that show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes. To distinguish a genuine correction from a superficial change, inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.

Incorrect Answers

B:

“Assume an OSPF process ID must be identical across neighbors for adjacency” would not meet the requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Instead, enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.

C:

“Put the transit peers in different OSPF areas without a correct ABR design” does not implement the control that the facts call for. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Instead, enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.

D:

“Configure a network statement that matches no local transit interface” does not implement the control that the facts call for. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Instead, enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.

Question 412

For the condition 'Two connected routers have matching IP addressing but no OSPF neighbors after the interface subnet was omitted from network statements.' which networking principle best explains the correct solution?

  1. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.
  2. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
  3. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.
  4. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.

Explanation

Correct Answer

C:

An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes. Show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

Incorrect Answers

A:

“A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof” pertains to recursive next-hop route resolution, not the deciding condition here. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. The implementation must enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.

B:

The choice “Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address” concerns local host routes; it does not resolve the stated requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

D:

The choice “HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades” concerns hsrp active; it does not resolve the stated requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

Question 413

For this situation: Two connected routers have matching IP addressing but no OSPF neighbors after the interface subnet was omitted from network statements. Which test would prove the configuration is behaving as intended?

  1. show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.
  2. show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.
  3. show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
  4. show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router.

Explanation

Correct Answer

A:

An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

Incorrect Answers

B:

The choice “show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface” concerns recursive next-hop route resolution; it does not resolve the stated requirement. Show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

C:

“Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure” pertains to hsrp active, not the deciding condition here. Show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

D:

The choice “show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router” concerns local host routes; it does not resolve the stated requirement. Show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

Question 414

Which inspection best distinguishes the problem mechanism in this incident: Two connected routers have matching IP addressing but no OSPF neighbors after the interface subnet was omitted from network statements.

  1. Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.
  2. Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.
  3. Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
  4. Inspect show ip route connected, show ip interface brief and the interface IP/mask.

Explanation

Correct Answer

A:

The investigation 'Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.' examines the variables most likely to explain ospf process activation and network statement in this situation: Two connected routers have matching IP addressing but no OSPF neighbors after the interface subnet was omitted from network statements. Those checks are directly tied to the behavior that an OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. The engineer can correlate this evidence with the expected outcome that show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes. and decide whether to enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.

Incorrect Answers

B:

“Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution” pertains to recursive next-hop route resolution, not the deciding condition here. Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

C:

“Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table” pertains to hsrp active, not the deciding condition here. Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

D:

“Inspect show ip route connected, show ip interface brief and the interface IP/mask” pertains to local host routes, not the deciding condition here. Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

Question 415

Two bad design choices are hidden in this change plan: Two connected routers have matching IP addressing but no OSPF neighbors after the interface subnet was omitted from network statements. Which TWO should not be approved? Select TWO answers.

  1. Confirm the repair by checking that show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.
  2. Put the transit peers in different OSPF areas without a correct ABR design.
  3. Enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.
  4. Configure a network statement that matches no local transit interface.
  5. Collect targeted evidence to inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.

Explanation

Correct Answer

B:

“Put the transit peers in different OSPF areas without a correct ABR design” would violate the requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

D:

“Configure a network statement that matches no local transit interface” would violate the requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

Incorrect Answers

A:

“Confirm the repair by checking that show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes” adds a relevant safeguard or verification step rather than weakening the solution. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Confirm that show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

C:

“Enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes” is the controlled implementation, not an unsafe workaround. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Confirm that show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

E:

“Collect targeted evidence to inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration” adds a relevant safeguard or verification step rather than weakening the solution. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

Question 416

On a Cisco-based network, A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. Which change most directly solves the stated requirement?

  1. For this routed path, assume an OSPF process ID must be identical across neighbors for adjacency.
  2. For this routed path, put the transit peers in different OSPF areas without a correct ABR design.
  3. For this routed path, enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.
  4. For this routed path, configure a network statement that matches no local transit interface.

Explanation

Correct Answer

C:

The action 'For this routed path, enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.' directly addresses the ospf process activation and network statement requirement in this situation: A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. The relevant network mechanism is that an OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. A successful change should show that show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes. To distinguish a genuine correction from a superficial change, inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.

Incorrect Answers

A:

On a Cisco-based network, A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. “Assume an OSPF process ID must be identical across neighbors for adjacency” would not meet the requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Instead, enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.

B:

On a Cisco-based network, A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. “put the transit peers in different OSPF areas without a correct ABR design” does not implement the control that the facts call for. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Instead, enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.

D:

On a Cisco-based network, A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. “configure a network statement that matches no local transit interface” does not implement the control that the facts call for. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Instead, enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.

Question 417

A team is reviewing the design for this case: A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. What technical behavior is decisive?

  1. For this routed path, a recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.
  2. For this routed path, an OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.
  3. For this routed path, cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
  4. For this routed path, hSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.

Explanation

Correct Answer

B:

An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.

Incorrect Answers

A:

The choice “a recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof” concerns recursive next-hop route resolution; it does not resolve the stated requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

C:

A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. The choice “cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address” concerns local host routes; it does not resolve the stated requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

D:

A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. The choice “hSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades” concerns hsrp active; it does not resolve the stated requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

Question 418

An engineer implements a fix for 'A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0.'. Which result would conclusively validate the intended change?

  1. For this routed path, show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router.
  2. For this routed path, show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.
  3. For this routed path, show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.
  4. For this routed path, show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.

Explanation

Correct Answer

C:

An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes. If this test fails, inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.

Incorrect Answers

A:

Because on a Cisco-based network, A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. Which change most directly solves the stated requirement, the choice “show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router” concerns local host routes; it does not resolve the stated requirement. Show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

B:

On a Cisco-based network, A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. Which change most directly solves the stated requirement. The choice “show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface” concerns recursive next-hop route resolution; it does not resolve the stated requirement. Show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

D:

The choice “show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure” concerns hsrp active; it does not resolve the stated requirement. Show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

Question 419

For the case 'A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0.', which targeted checks should be compared before a disruptive change?

  1. For this routed path, inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
  2. For this routed path, inspect show ip route connected, show ip interface brief and the interface IP/mask.
  3. For this routed path, inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.
  4. For this routed path, inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.

Explanation

Correct Answer

D:

Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area. Show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

Incorrect Answers

A:

The choice “inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table” concerns hsrp active; it does not resolve the stated requirement. Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.

B:

The choice “inspect show ip route connected, show ip interface brief and the interface IP/mask” concerns local host routes; it does not resolve the stated requirement. Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.

C:

The choice “inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution” concerns recursive next-hop route resolution; it does not resolve the stated requirement. Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.

Question 420

Network review: A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this routed path, put the transit peers in different OSPF areas without a correct ABR design.
  2. For this routed path, collect targeted evidence to inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.
  3. For this routed path, configure a network statement that matches no local transit interface.
  4. For this routed path, enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes.
  5. For this routed path, confirm the repair by checking that show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.

Explanation

Correct Answer

A:

A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. Which TWO proposed shortcuts would be unsafe in this situation. “Put the transit peers in different OSPF areas without a correct ABR design” would violate the requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

C:

A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. Which TWO proposed shortcuts would be unsafe in this situation. “Configure a network statement that matches no local transit interface” would violate the requirement. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

Incorrect Answers

B:

A campus router needs to advertise its connected LAN prefixes into single-area OSPF area 0. Which TWO proposed shortcuts would be unsafe in this situation. “collect targeted evidence to inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration” adds a relevant safeguard or verification step rather than weakening the solution. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

D:

“enable OSPF on the intended transit interfaces in the correct area and advertise the required connected prefixes” is the controlled implementation, not an unsafe workaround. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

E:

“confirm the repair by checking that show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes” adds a relevant safeguard or verification step rather than weakening the solution. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests