Cisco 200-301 Practice Test 40 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 40

Question 390

For this incident: An edge router knows internal subnets but has no route to arbitrary public destinations over its uplink. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this routed path, confirm the repair by checking that show ip route displays S* 0.0.0.0/0 and an external traceroute follows the upstream, while local routes still use local interfaces.
  2. For this routed path, replace every internal connected route with 0.0.0.0/0.
  3. For this routed path, set a /32 default that matches only 0.0.0.0 rather than every unknown destination.
  4. For this routed path, configure a reachable 0.0.0.0/0 static default route toward the approved upstream next hop.
  5. For this routed path, collect targeted evidence to inspect show ip route 0.0.0.0, recursive next-hop reachability, upstream return routing and NAT policy.

Explanation

Correct Answer

B:

An edge router knows internal subnets but has no route to arbitrary public destinations over its uplink. “Replace every internal connected route with 0.0.0.0/0” would violate the requirement.

C:

An edge router knows internal subnets but has no route to arbitrary public destinations over its uplink. “Set a /32 default that matches only 0.0.0.0 rather than every unknown destination” would violate the requirement.

Incorrect Answers

A:

An edge router knows internal subnets but has no route to arbitrary public destinations over its uplink. “confirm the repair by checking that show ip route displays S* 0.0.0.0/0 and an external traceroute follows the upstream, while local routes still use local interfaces” adds a relevant safeguard or verification step rather than weakening the solution.

D:

“configure a reachable 0.0.0.0/0 static default route toward the approved upstream next hop” is the controlled implementation, not an unsafe workaround. An important verification is that the IPv4 default route is a catch-all for destinations with no longer matching route; specific internal prefixes remain preferred.

E:

“collect targeted evidence to inspect show ip route 0.0.0.0, recursive next-hop reachability, upstream return routing and NAT policy” adds a relevant safeguard or verification step rather than weakening the solution.

Question 391

An engineer must resolve the following situation: An IPv6 branch must reach 2001:db8:44:20::/64 using neighbor FE80::2 on Gi0/1. Select the most appropriate solution.

  1. Try to ARP for an IPv6 address rather than use Neighbor Discovery.
  2. Configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.
  3. Add an IPv4 default route and expect it to provide IPv6 reachability.
  4. Configure a link-local next hop without egress interface scope on a multi-interface router.

Explanation

Correct Answer

B:

The action 'Configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.' directly addresses the ipv6 static routes and link-local scope requirement in this situation: An IPv6 branch must reach 2001:db8:44:20::/64 using neighbor FE80::2 on Gi0/1. The relevant network mechanism is that iPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. A successful change should show that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds. To distinguish a genuine correction from a superficial change, inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping.

Incorrect Answers

A:

“Try to ARP for an IPv6 address rather than use Neighbor Discovery” does not implement the control that the facts call for. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Instead, configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.

C:

“Add an IPv4 default route and expect it to provide IPv6 reachability” does not implement the control that the facts call for. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Instead, configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.

D:

“Configure a link-local next hop without egress interface scope on a multi-interface router” does not implement the control that the facts call for. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Instead, configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.

Question 392

For the condition 'An IPv6 branch must reach 2001:db8:44:20::/64 using neighbor FE80::2 on Gi0/1.' which networking principle best explains the correct solution?

  1. An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.
  2. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.
  3. The IPv4 default route is a catch-all for destinations with no longer matching route; specific internal prefixes remain preferred.
  4. IPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.

Explanation

Correct Answer

B:

IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

Incorrect Answers

A:

The choice “An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area” concerns ospf process activation; it does not resolve the stated requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

C:

“The IPv4 default route is a catch-all for destinations with no longer matching route; specific internal prefixes remain preferred” pertains to ipv4 default static route, not the deciding condition here. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. The implementation must configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.

D:

The choice “IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate” concerns ipv6 default route; it does not resolve the stated requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

Question 393

For this situation: An IPv6 branch must reach 2001:db8:44:20::/64 using neighbor FE80::2 on Gi0/1. Which test would prove the configuration is behaving as intended?

  1. show ip route displays S* 0.0.0.0/0 and an external traceroute follows the upstream, while local routes still use local interfaces.
  2. show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.
  3. show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.
  4. show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred.

Explanation

Correct Answer

B:

IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

Incorrect Answers

A:

“Show ip route displays S* 0.0.0.0/0 and an external traceroute follows the upstream, while local routes still use local interfaces” pertains to ipv4 default static route, not the deciding condition here. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

C:

The choice “show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes” concerns ospf process activation; it does not resolve the stated requirement. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

D:

“Show ipv6 route shows S::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred” pertains to ipv6 default route, not the deciding condition here. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

Question 394

Which inspection best distinguishes the problem mechanism in this incident: An IPv6 branch must reach 2001:db8:44:20::/64 using neighbor FE80::2 on Gi0/1.

  1. Inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping.
  2. Inspect show ip route 0.0.0.0, recursive next-hop reachability, upstream return routing and NAT policy.
  3. Inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity.
  4. Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.

Explanation

Correct Answer

A:

The investigation 'Inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping.' examines the variables most likely to explain ipv6 static routes and link-local scope in this situation: An IPv6 branch must reach 2001:db8:44:20::/64 using neighbor FE80::2 on Gi0/1. Those checks are directly tied to the behavior that iPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. The engineer can correlate this evidence with the expected outcome that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds. and decide whether to configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.

Incorrect Answers

B:

The choice “Inspect show ip route 0.0.0.0, recursive next-hop reachability, upstream return routing and NAT policy” concerns ipv4 default static route; it does not resolve the stated requirement. Inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping.

C:

The choice “Inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity” concerns ipv6 default route; it does not resolve the stated requirement. Inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping.

D:

The choice “Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration” concerns ospf process activation; it does not resolve the stated requirement. Inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping.

Question 395

Two bad design choices are hidden in this change plan: An IPv6 branch must reach 2001:db8:44:20::/64 using neighbor FE80::2 on Gi0/1. Which TWO should not be approved? Select TWO answers.

  1. Configure a link-local next hop without egress interface scope on a multi-interface router.
  2. Confirm the repair by checking that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.
  3. Try to ARP for an IPv6 address rather than use Neighbor Discovery.
  4. Collect targeted evidence to inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping.
  5. Configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.

Explanation

Correct Answer

A:

“Configure a link-local next hop without egress interface scope on a multi-interface router” would violate the requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

C:

“Try to ARP for an IPv6 address rather than use Neighbor Discovery” would violate the requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

Incorrect Answers

B:

“Confirm the repair by checking that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Confirm that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

D:

“Collect targeted evidence to inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Confirm that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

E:

“Configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop” is the controlled implementation, not an unsafe workaround. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

Question 396

On a Cisco-based network, A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. Which change most directly solves the stated requirement?

  1. For this routed path, configure a link-local next hop without egress interface scope on a multi-interface router.
  2. For this routed path, configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.
  3. For this routed path, add an IPv4 default route and expect it to provide IPv6 reachability.
  4. For this routed path, try to ARP for an IPv6 address rather than use Neighbor Discovery.

Explanation

Correct Answer

B:

IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Confirm that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

Incorrect Answers

A:

A for a remote site prefix but multiple interfaces share that neighbor form. “configure a link-local next hop without egress interface scope on a multi-interface router” does not implement the control that the facts call for. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Instead, configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.

C:

A for a remote site prefix but multiple interfaces share that neighbor form. “add an IPv4 default route and expect it to provide IPv6 reachability” does not implement the control that the facts call for. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Instead, configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.

D:

A for a remote site prefix but multiple interfaces share that neighbor form. “try to ARP for an IPv6 address rather than use Neighbor Discovery” does not implement the control that the facts call for. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Instead, configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.

Question 397

A team is reviewing the design for this case: A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. What technical behavior is decisive?

  1. For this routed path, the IPv4 default route is a catch-all for destinations with no longer matching route; specific internal prefixes remain preferred.
  2. For this routed path, iPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.
  3. For this routed path, iPv6 ::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate.
  4. For this routed path, an OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area.

Explanation

Correct Answer

B:

IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.

Incorrect Answers

A:

The choice “the IPv4 default route is a catch-all for destinations with no longer matching route; specific internal prefixes remain preferred” concerns ipv4 default static route; it does not resolve the stated requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

C:

A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. The choice “iPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate” concerns ipv6 default route; it does not resolve the stated requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

D:

A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. The choice “an OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area” concerns ospf process activation; it does not resolve the stated requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

Question 398

An engineer implements a fix for 'A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form.'. Which result would conclusively validate the intended change?

  1. For this routed path, show ip route displays S* 0.0.0.0/0 and an external traceroute follows the upstream, while local routes still use local interfaces.
  2. For this routed path, show ipv6 route shows S ::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred.
  3. For this routed path, show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes.
  4. For this routed path, show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

Explanation

Correct Answer

D:

On a Cisco-based network, A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. Which change most directly solves the stated requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

Incorrect Answers

A:

The choice “show ip route displays S* 0.0.0.0/0 and an external traceroute follows the upstream, while local routes still use local interfaces” concerns ipv4 default static route; it does not resolve the stated requirement. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

B:

The choice “show ipv6 route shows S::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred” concerns ipv6 default route; it does not resolve the stated requirement. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

C:

On a Cisco-based network, A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. Which change most directly solves the stated requirement. The choice “show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes” concerns ospf process activation; it does not resolve the stated requirement. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

Question 399

For the case 'A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form.', which targeted checks should be compared before a disruptive change?

  1. For this routed path, inspect show ip route 0.0.0.0, recursive next-hop reachability, upstream return routing and NAT policy.
  2. For this routed path, inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration.
  3. For this routed path, inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity.
  4. For this routed path, inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping.

Explanation

Correct Answer

D:

On a Cisco-based network, A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. Which change most directly solves the stated requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds. The observable acceptance condition here is: Inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping.

Incorrect Answers

A:

“Inspect show ip route 0.0.0.0, recursive next-hop reachability, upstream return routing and NAT policy” pertains to ipv4 default static route, not the deciding condition here. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

B:

“Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration” pertains to ospf process activation, not the deciding condition here. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

C:

“Inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity” pertains to ipv6 default route, not the deciding condition here. Show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

Question 400

Network review: A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this routed path, confirm the repair by checking that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.
  2. For this routed path, collect targeted evidence to inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping.
  3. For this routed path, try to ARP for an IPv6 address rather than use Neighbor Discovery.
  4. For this routed path, configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop.
  5. For this routed path, configure a link-local next hop without egress interface scope on a multi-interface router.

Explanation

Correct Answer

C:

A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. “Try to ARP for an IPv6 address rather than use Neighbor Discovery” would violate the requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

E:

A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. “Configure a link-local next hop without egress interface scope on a multi-interface router” would violate the requirement. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface.

Incorrect Answers

A:

A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. “confirm the repair by checking that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Confirm that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

B:

A router has the next-hop IPv6 link-local FE80::A for a remote site prefix but multiple interfaces share that neighbor form. “collect targeted evidence to inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Confirm that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

D:

“configure ipv6 route for the destination prefix with the correct egress interface and link-local next hop” is the controlled implementation, not an unsafe workaround. IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface. Confirm that show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests