Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 15
Question 140
Network review: Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. “Configure FE80::1 as a globally unique next hop with no interface scope” would violate the requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. “Assume link-local neighbor resolution works over a remote routed network” would violate the requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Incorrect Answers
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. “collect targeted evidence to inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Confirm that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
“confirm the repair by checking that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Confirm that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. “specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route” is the controlled implementation, not an unsafe workaround. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Confirm that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
Question 141
Consider this operational failure: Two neighboring office APs use 2.4-GHz channels 3 and 4 and users experience co-channel interference. What should the administrator implement first?
Explanation
Correct Answer
The action 'Plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.' directly addresses the 2.4 ghz wi-fi channel overlap requirement in this situation: Two neighboring office APs use 2.4-GHz channels 3 and 4 and users experience co-channel interference. The relevant network mechanism is that 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close. A successful change should show that spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area. To distinguish a genuine correction from a superficial change, inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics.
Incorrect Answers
“Set every nearby 2.4-GHz AP to channel 4 to maximize unique channel numbers” does not implement the control that the facts call for. Instead, plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
“Increase all AP transmit power to maximum regardless of cell overlap” does not implement the control that the facts call for. Instead, plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
“Choose channels solely by SSID labels without a radio survey” does not implement the control that the facts call for. Instead, plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
Question 142
While troubleshooting 'Two neighboring office APs use 2.4-GHz channels 3 and 4 and users experience co-channel interference.', which underlying protocol rule should guide the decision?
Explanation
Correct Answer
2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close. Spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area.
Incorrect Answers
“SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing” pertains to ipv6 slaac, not the deciding condition here. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
“IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor” pertains to ipv6 link-local next-hop, not the deciding condition here. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
The choice “TCP sequence and acknowledgement numbers, sliding windows and retransmission support reliable ordered delivery; UDP does not provide these guarantees itself” concerns tcp ordering; it does not resolve the stated requirement. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
Question 143
Which measurable result should be checked before closing this ticket: Two neighboring office APs use 2.4-GHz channels 3 and 4 and users experience co-channel interference.
Explanation
Correct Answer
The observation 'Spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area.' specifically demonstrates a successful outcome for 2.4 ghz wi-fi channel overlap in this case: Two neighboring office APs use 2.4-GHz channels 3 and 4 and users experience co-channel interference. That observation tests the underlying mechanism that 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey. If it fails, inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics. to isolate the remaining defect.
Incorrect Answers
“Show ip nat translations displays distinct inside-local source sockets sharing the intended inside-global address while external connectivity succeeds” pertains to private ipv4, not the deciding condition here. Spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area.
The choice “Client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds” concerns ipv6 slaac; it does not resolve the stated requirement. Spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area.
“Packet capture shows UDP datagrams on intended ports and observed jitter and loss remain within the application budget” alone does not establish all the required behavior. Spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area.
Question 144
Before modifying more devices to address 'Two neighboring office APs use 2.4-GHz channels 3 and 4 and users experience co-channel interference.', which diagnostic evidence is most relevant?
Explanation
Correct Answer
The investigation 'Inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics.' examines the variables most likely to explain 2.4 ghz wi-fi channel overlap in this situation: Two neighboring office APs use 2.4-GHz channels 3 and 4 and users experience co-channel interference. Those checks are directly tied to the behavior that 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close. The engineer can correlate this evidence with the expected outcome that spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area. and decide whether to plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
Incorrect Answers
The choice “Inspect inside/outside interface roles, the NAT ACL, translation table, default route and external IP connectivity” concerns private ipv4; it does not resolve the stated requirement. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
The choice “Inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability” concerns ipv6 slaac; it does not resolve the stated requirement. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
“Calculate last-octet block boundaries using 64, compare ipconfig or show ip interface and test ARP to the peer” pertains to ipv4 /26 network calculation, not the deciding condition here. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
Question 145
A change board considers the issue 'Two neighboring office APs use 2.4-GHz channels 3 and 4 and users experience co-channel interference.'. Identify the TWO decisions that should be rejected. Select TWO answers.
Explanation
Correct Answer
“Set every nearby 2.4-GHz AP to channel 4 to maximize unique channel numbers” would violate the requirement.
“Increase all AP transmit power to maximum regardless of cell overlap” would violate the requirement. The appropriate control instead is to plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
Incorrect Answers
“Plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey” is the controlled implementation, not an unsafe workaround.
“Collect targeted evidence to inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area.
“Confirm the repair by checking that spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area.
Question 146
A network operator receives this ticket: A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap. Which configuration is best suited to the reported issue?
Explanation
Correct Answer
The action 'For this LAN, plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.' directly addresses the 2.4 ghz wi-fi channel overlap requirement in this situation: A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap. The relevant network mechanism is that 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close. A successful change should show that spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area. To distinguish a genuine correction from a superficial change, inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics.
Incorrect Answers
A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap. “Set every nearby 2.4-GHz AP to channel 4 to maximize unique channel numbers” does not implement the control that the facts call for. Instead, plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap. “Increase all AP transmit power to maximum regardless of cell overlap” does not implement the control that the facts call for. Instead, plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap. “Choose channels solely by SSID labels without a radio survey” does not implement the control that the facts call for. Instead, plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
Question 147
Which network-layer or protocol behavior most directly explains the result in this case: A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap.
Explanation
Correct Answer
2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close. Plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
Incorrect Answers
A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap. “IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor” pertains to ipv6 link-local next-hop, not the deciding condition here. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
“RFC1918 private IPv4 prefixes are not publicly routed on the Internet; PAT can map many private source ports to one global address” pertains to private ipv4, not the deciding condition here. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
“VRF creates separate Layer 3 routing and forwarding contexts, allowing overlapping IP prefixes without automatically leaking routes between tenants” alone does not establish all the required behavior. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
Question 148
After correcting 'A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap.', which observation is the strongest evidence that the specific requirement is met?
Explanation
Correct Answer
The observation 'For this LAN, spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area.' specifically demonstrates a successful outcome for 2.4 ghz wi-fi channel overlap in this case: A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap. That observation tests the underlying mechanism that 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey. If it fails, inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics. to isolate the remaining defect.
Incorrect Answers
“Show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic” pertains to ipv6 link-local next-hop, not the deciding condition here. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
“Show ip nat translations displays distinct inside-local source sockets sharing the intended inside-global address while external connectivity succeeds” pertains to private ipv4, not the deciding condition here. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
“Show ip route vrf RED and show ip route vrf BLUE differ; probes stay isolated unless an explicit route-leak policy is added” alone does not establish all the required behavior. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
Question 149
An operator is triaging the issue 'A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap.'. What should be inspected to isolate the actual cause?
Explanation
Correct Answer
The investigation 'For this LAN, inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics.' examines the variables most likely to explain 2.4 ghz wi-fi channel overlap in this situation: A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap. Those checks are directly tied to the behavior that 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close. The engineer can correlate this evidence with the expected outcome that spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area. and decide whether to plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
Incorrect Answers
The choice “inspect inside/outside interface roles, the NAT ACL, translation table, default route and external IP connectivity” concerns private ipv4; it does not resolve the stated requirement. Inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics.
The choice “inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface” concerns ipv6 link-local next-hop; it does not resolve the stated requirement. Inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics.
“Check per-VRF interface membership, per-VRF routes, route leaking configuration and tenant-specific ping vrf” would not be the most direct first check for this failure. Inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics.
Question 150
For this incident: A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
“Set every nearby 2.4-GHz AP to channel 4 to maximize unique channel numbers” would violate the requirement. The appropriate control instead is to plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
A school with multiple overlapping 2.4-GHz radios needs to plan channel reuse to reduce adjacent-channel overlap. “Increase all AP transmit power to maximum regardless of cell overlap” would violate the requirement. The appropriate control instead is to plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey.
Incorrect Answers
“plan non-overlapping 20-MHz 2.4-GHz channels such as 1, 6 and 11 and adjust power based on site survey” is the controlled implementation, not an unsafe workaround. Confirm that 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
“confirm the repair by checking that spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
“collect targeted evidence to inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 13 - 10 Questions (Last Reviewed 05-Nov-2026)
- Cisco 200-301 Practice Test 14 - 10 Questions (Last Reviewed 04-Nov-2026)
- Cisco 200-301 Practice Test 15 - 10 Questions (Last Reviewed 03-Nov-2026)
- Cisco 200-301 Practice Test 16 - 10 Questions (Last Reviewed 02-Nov-2026)
- Cisco 200-301 Practice Test 17 - 10 Questions (Last Reviewed 01-Nov-2026)
