Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 14
Question 130
For this incident: A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
“Suppress all ICMPv6 router advertisements while expecting SLAAC to work” would violate the requirement. The appropriate control instead is to enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.
“Assume a link-local address proves a valid Internet-routable prefix was advertised” would violate the requirement. The appropriate control instead is to enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.
Incorrect Answers
“collect targeted evidence to inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.
“enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients” is the controlled implementation, not an unsafe workaround. Confirm that sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.
“confirm the repair by checking that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.
Question 131
An engineer must resolve the following situation: An engineer configures an IPv6 static route with a link-local next hop on a multi-interface router. Select the most appropriate solution.
Explanation
Correct Answer
The action 'Specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.' directly addresses the ipv6 link-local next-hop requirement in this situation: An engineer configures an IPv6 static route with a link-local next hop on a multi-interface router. The relevant network mechanism is that iPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. A successful change should show that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic. To distinguish a genuine correction from a superficial change, inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface.
Incorrect Answers
“Remove IPv6 neighbor discovery because the next hop is already written in a static route” would not meet the requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Instead, specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.
“Assume link-local neighbor resolution works over a remote routed network” would not meet the requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Instead, specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.
“Configure FE80::1 as a globally unique next hop with no interface scope” does not implement the control that the facts call for. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Instead, specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.
Question 132
For the condition 'An engineer configures an IPv6 static route with a link-local next hop on a multi-interface router.' which networking principle best explains the correct solution?
Explanation
Correct Answer
IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route. Show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
Incorrect Answers
“UDP has minimal transport setup and no built-in stream retransmission; applications must implement any needed recovery or sequencing” does not fully explain the decisive technical boundary in this case. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
The choice “Duplex mismatch creates collisions or late collisions on one end and FCS or runts on the other even while link LEDs remain up” concerns duplex mismatch on ethernet; it does not resolve the stated requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
The choice “TCP sequence and acknowledgement numbers, sliding windows and retransmission support reliable ordered delivery; UDP does not provide these guarantees itself” concerns tcp ordering; it does not resolve the stated requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Question 133
For this situation: An engineer configures an IPv6 static route with a link-local next hop on a multi-interface router. Which test would prove the configuration is behaving as intended?
Explanation
Correct Answer
The observation 'show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.' specifically demonstrates a successful outcome for ipv6 link-local next-hop in this case: An engineer configures an IPv6 static route with a link-local next hop on a multi-interface router. That observation tests the underlying mechanism that iPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route. If it fails, inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface. to isolate the remaining defect.
Incorrect Answers
The choice “A lost segment is retransmitted and the receiving application reconstructs the original ordered stream without duplicate records” concerns tcp ordering; it does not resolve the stated requirement. Show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
“Packet capture shows UDP datagrams on intended ports and observed jitter and loss remain within the application budget” alone does not establish all the required behavior. Show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
The choice “show interfaces counters stop increasing and file transfers sustain expected throughput after both ports agree on duplex” concerns duplex mismatch on ethernet; it does not resolve the stated requirement. Show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
Question 134
Which inspection best distinguishes the problem mechanism in this incident: An engineer configures an IPv6 static route with a link-local next hop on a multi-interface router.
Explanation
Correct Answer
The investigation 'Inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface.' examines the variables most likely to explain ipv6 link-local next-hop in this situation: An engineer configures an IPv6 static route with a link-local next hop on a multi-interface router. Those checks are directly tied to the behavior that iPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. The engineer can correlate this evidence with the expected outcome that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic. and decide whether to specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.
Incorrect Answers
The choice “Inspect a packet capture for SYN handshake, sequence gaps, ACKs and retransmissions and compare application error logs” concerns tcp ordering; it does not resolve the stated requirement. Inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface.
“Inspect UDP source/destination ports, application sequence numbers and jitter/loss metrics rather than expecting TCP ACKs” would not be the most direct first check for this failure. Inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
The choice “Inspect both ends' speed/duplex settings and show interfaces collision, late-collision, FCS and runts counters” concerns duplex mismatch on ethernet; it does not resolve the stated requirement. Inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface.
Question 135
Two bad design choices are hidden in this change plan: An engineer configures an IPv6 static route with a link-local next hop on a multi-interface router. Which TWO should not be approved? Select TWO answers.
Explanation
Correct Answer
“Assume link-local neighbor resolution works over a remote routed network” would violate the requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
“Configure FE80::1 as a globally unique next hop with no interface scope” would violate the requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Incorrect Answers
“Collect targeted evidence to inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Confirm that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
“Specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route” is the controlled implementation, not an unsafe workaround. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Confirm that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
“Confirm the repair by checking that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Question 136
On a Cisco-based network, Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. Which change most directly solves the stated requirement?
Explanation
Correct Answer
The action 'For this LAN, specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.' directly addresses the ipv6 link-local next-hop requirement in this situation: Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. The relevant network mechanism is that iPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. A successful change should show that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic. To distinguish a genuine correction from a superficial change, inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface.
Incorrect Answers
1 on different links, and the correct outgoing interface must be identified when using that next hop. “Remove IPv6 neighbor discovery because the next hop is already written in a static route” would not meet the requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Instead, specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.
1 on different links, and the correct outgoing interface must be identified when using that next hop. “configure FE80::1 as a globally unique next hop with no interface scope” does not implement the control that the facts call for. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Instead, specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.
1 on different links, and the correct outgoing interface must be identified when using that next hop. “Assume link-local neighbor resolution works over a remote routed network” would not meet the requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Instead, specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.
Question 137
A team is reviewing the design for this case: Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. What technical behavior is decisive?
Explanation
Correct Answer
IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.
Incorrect Answers
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. The choice “tCP sequence and acknowledgement numbers, sliding windows and retransmission support reliable ordered delivery; UDP does not provide these guarantees itself” concerns tcp ordering; it does not resolve the stated requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. “UDP has minimal transport setup and no built-in stream retransmission; applications must implement any needed recovery or sequencing” does not fully explain the decisive technical boundary in this case. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. The choice “duplex mismatch creates collisions or late collisions on one end and FCS or runts on the other even while link LEDs remain up” concerns duplex mismatch on ethernet; it does not resolve the stated requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Question 138
An engineer implements a fix for 'Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop.'. Which result would conclusively validate the intended change?
Explanation
Correct Answer
IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
Incorrect Answers
“Show interfaces counters stop increasing and file transfers sustain expected throughput after both ports agree on duplex” pertains to duplex mismatch on ethernet, not the deciding condition here. Show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
“A lost segment is retransmitted and the receiving application reconstructs the original ordered stream without duplicate records” pertains to tcp ordering, not the deciding condition here. Show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
“Packet capture shows UDP datagrams on intended ports and observed jitter and loss remain within the application budget” alone does not establish all the required behavior. Show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Question 139
For the case 'Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop.', which targeted checks should be compared before a disruptive change?
Explanation
Correct Answer
The investigation 'For this LAN, inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface.' examines the variables most likely to explain ipv6 link-local next-hop in this situation: Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. Those checks are directly tied to the behavior that iPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. The engineer can correlate this evidence with the expected outcome that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic. and decide whether to specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route.
Incorrect Answers
1 on different links, and the correct outgoing interface must be identified when using that next hop. “Inspect UDP source/destination ports, application sequence numbers and jitter/loss metrics rather than expecting TCP ACKs” would not be the most direct first check for this failure. Inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
“Inspect a packet capture for SYN handshake, sequence gaps, ACKs and retransmissions and compare application error logs” pertains to tcp ordering, not the deciding condition here. Inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
“Inspect both ends' speed/duplex settings and show interfaces collision, late-collision, FCS and runts counters” pertains to duplex mismatch on ethernet, not the deciding condition here. Inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Question 140
Network review: Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. “Configure FE80::1 as a globally unique next hop with no interface scope” would violate the requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. “Assume link-local neighbor resolution works over a remote routed network” would violate the requirement. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
Incorrect Answers
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. “collect targeted evidence to inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Confirm that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
“confirm the repair by checking that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic” adds a relevant safeguard or verification step rather than weakening the solution. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Confirm that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
Two routers share FE80::1 on different links, and the correct outgoing interface must be identified when using that next hop. “specify both the link-local next-hop address and the correct outgoing interface for a static IPv6 route” is the controlled implementation, not an unsafe workaround. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor. Confirm that show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 12 - 10 Questions (Last Reviewed 06-Nov-2026)
- Cisco 200-301 Practice Test 13 - 10 Questions (Last Reviewed 05-Nov-2026)
- Cisco 200-301 Practice Test 14 - 10 Questions (Last Reviewed 04-Nov-2026)
- Cisco 200-301 Practice Test 15 - 10 Questions (Last Reviewed 03-Nov-2026)
- Cisco 200-301 Practice Test 16 - 10 Questions (Last Reviewed 02-Nov-2026)
