Cisco 200-301 Practice Test 13 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 13

Question 120

Network review: An IoT network uses 10.18.6.0/24 and needs internet access without public addresses on every sensor. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this LAN, keep RFC1918 addressing internally and translate outbound flows through a routable external address using NAT overload.
  2. For this LAN, collect targeted evidence to inspect inside/outside interface roles, the NAT ACL, translation table, default route and external IP connectivity.
  3. For this LAN, assign the same public IP directly to every internal endpoint without NAT.
  4. For this LAN, advertise 10.18.6.0/24 as a globally routable Internet prefix.
  5. For this LAN, confirm the repair by checking that show ip nat translations displays distinct inside-local source sockets sharing the intended inside-global address while external connectivity succeeds.

Explanation

Correct Answer

C:

An IoT network uses 10.18.6.0/24 and needs internet access without public addresses on every sensor. “Assign the same public IP directly to every internal endpoint without NAT” would violate the requirement. RFC1918 private IPv4 prefixes are not publicly routed on the Internet; PAT can map many private source ports to one global address.

D:

An IoT network uses 10.18.6.0/24 and needs internet access without public addresses on every sensor. “Advertise 10.18.6.0/24 as a globally routable Internet prefix” would violate the requirement. RFC1918 private IPv4 prefixes are not publicly routed on the Internet; PAT can map many private source ports to one global address.

Incorrect Answers

A:

“keep RFC1918 addressing internally and translate outbound flows through a routable external address using NAT overload” is the controlled implementation, not an unsafe workaround. RFC1918 private IPv4 prefixes are not publicly routed on the Internet; PAT can map many private source ports to one global address.

B:

An IoT network uses 10.18.6.0/24 and needs internet access without public addresses on every sensor. “collect targeted evidence to inspect inside/outside interface roles, the NAT ACL, translation table, default route and external IP connectivity” adds a relevant safeguard or verification step rather than weakening the solution. RFC1918 private IPv4 prefixes are not publicly routed on the Internet; PAT can map many private source ports to one global address.

E:

“confirm the repair by checking that show ip nat translations displays distinct inside-local source sockets sharing the intended inside-global address while external connectivity succeeds” adds a relevant safeguard or verification step rather than weakening the solution. RFC1918 private IPv4 prefixes are not publicly routed on the Internet; PAT can map many private source ports to one global address.

Question 121

Consider this operational failure: An IPv6 workstation receives a link-local address but not a global unicast address on its VLAN. What should the administrator implement first?

  1. Use an arbitrary /120 advertised prefix while assuming all clients implement normal /64 SLAAC.
  2. Enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.
  3. Suppress all ICMPv6 router advertisements while expecting SLAAC to work.
  4. Assume a link-local address proves a valid Internet-routable prefix was advertised.

Explanation

Correct Answer

B:

The action 'Enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.' directly addresses the ipv6 slaac and router advertisement requirement in this situation: An IPv6 workstation receives a link-local address but not a global unicast address on its VLAN. The relevant network mechanism is that sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing. A successful change should show that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds. To distinguish a genuine correction from a superficial change, inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.

Incorrect Answers

A:

“Use an arbitrary /120 advertised prefix while assuming all clients implement normal /64 SLAAC” does not implement the control that the facts call for. Instead, enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

C:

“Suppress all ICMPv6 router advertisements while expecting SLAAC to work” does not implement the control that the facts call for. Instead, enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

D:

“Assume a link-local address proves a valid Internet-routable prefix was advertised” would not meet the requirement. Instead, enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

Question 122

While troubleshooting 'An IPv6 workstation receives a link-local address but not a global unicast address on its VLAN.', which underlying protocol rule should guide the decision?

  1. A Layer 2 switch learns source MAC addresses on ingress ports, forwards known unicasts toward one port, and floods unknown unicast within the associated VLAN.
  2. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.
  3. Collapsed-core designs combine core and distribution functions, while spine-leaf fabrics use a consistent leaf-to-spine forwarding structure and equal-cost paths.
  4. Controller-managed WLANs separate centralized policy and management from the radio access point's client-facing RF service.

Explanation

Correct Answer

B:

SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing. Client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.

Incorrect Answers

A:

The choice “A Layer 2 switch learns source MAC addresses on ingress ports, forwards known unicasts toward one port, and floods unknown unicast within the associated VLAN” concerns mac learning; it does not resolve the stated requirement. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

C:

“Collapsed-core designs combine core and distribution functions, while spine-leaf fabrics use a consistent leaf-to-spine forwarding structure and equal-cost paths” would not be the most direct first check for this failure. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

D:

“Controller-managed WLANs separate centralized policy and management from the radio access point's client-facing RF service” pertains to wireless ap, not the deciding condition here. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

Question 123

Which measurable result should be checked before closing this ticket: An IPv6 workstation receives a link-local address but not a global unicast address on its VLAN.

  1. show mac address-table dynamic displays the learned source and its current interface; subsequent traffic reaches only the correct destination port.
  2. Client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.
  3. The intended SSID and security policy appear consistently on joined APs, and authenticated clients roam using the same authorized WLAN.
  4. Traffic follows intended redundant links with acceptable convergence, and topology diagrams show the chosen hierarchy or fabric connectivity.

Explanation

Correct Answer

B:

Client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds. Enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

Incorrect Answers

A:

“Show mac address-table dynamic displays the learned source and its current interface; subsequent traffic reaches only the correct destination port” pertains to mac learning, not the deciding condition here. Client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.

C:

“The intended SSID and security policy appear consistently on joined APs, and authenticated clients roam using the same authorized WLAN” pertains to wireless ap, not the deciding condition here. Client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.

D:

“Traffic follows intended redundant links with acceptable convergence, and topology diagrams show the chosen hierarchy or fabric connectivity” alone does not establish all the required behavior. Client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.

Question 124

Before modifying more devices to address 'An IPv6 workstation receives a link-local address but not a global unicast address on its VLAN.', which diagnostic evidence is most relevant?

  1. Inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.
  2. Inspect AP join status, WLC WLAN profile, mapped policy profile, RF state and client association details.
  3. Trace physical uplinks, check routed adjacency and ECMP entries, compare oversubscription and failure domains.
  4. Inspect show mac address-table vlan 20, learned MAC age and ingress VLAN membership before modifying trunks.

Explanation

Correct Answer

A:

The investigation 'Inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.' examines the variables most likely to explain ipv6 slaac and router advertisement in this situation: An IPv6 workstation receives a link-local address but not a global unicast address on its VLAN. Those checks are directly tied to the behavior that sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing. The engineer can correlate this evidence with the expected outcome that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds. and decide whether to enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

Incorrect Answers

B:

“Inspect AP join status, WLC WLAN profile, mapped policy profile, RF state and client association details” pertains to wireless ap, not the deciding condition here. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

C:

“Trace physical uplinks, check routed adjacency and ECMP entries, compare oversubscription and failure domains” would not be the most direct first check for this failure. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

D:

“Inspect show mac address-table vlan 20, learned MAC age and ingress VLAN membership before modifying trunks” pertains to mac learning, not the deciding condition here. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

Question 125

A change board considers the issue 'An IPv6 workstation receives a link-local address but not a global unicast address on its VLAN.'. Identify the TWO decisions that should be rejected. Select TWO answers.

  1. Assume a link-local address proves a valid Internet-routable prefix was advertised.
  2. Confirm the repair by checking that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.
  3. Collect targeted evidence to inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.
  4. Suppress all ICMPv6 router advertisements while expecting SLAAC to work.
  5. Enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

Explanation

Correct Answer

A:

“Assume a link-local address proves a valid Internet-routable prefix was advertised” would violate the requirement.

D:

“Suppress all ICMPv6 router advertisements while expecting SLAAC to work” would violate the requirement.

Incorrect Answers

B:

“Confirm the repair by checking that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds” adds a relevant safeguard or verification step rather than weakening the solution.

C:

“Collect targeted evidence to inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.

E:

“Enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients” is the controlled implementation, not an unsafe workaround. Confirm that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.

Question 126

A network operator receives this ticket: A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server. Which configuration is best suited to the reported issue?

  1. For this LAN, suppress all ICMPv6 router advertisements while expecting SLAAC to work.
  2. For this LAN, use an arbitrary /120 advertised prefix while assuming all clients implement normal /64 SLAAC.
  3. For this LAN, enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.
  4. For this LAN, assume a link-local address proves a valid Internet-routable prefix was advertised.

Explanation

Correct Answer

C:

The action 'For this LAN, enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.' directly addresses the ipv6 slaac and router advertisement requirement in this situation: A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server. The relevant network mechanism is that sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing. A successful change should show that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds. To distinguish a genuine correction from a superficial change, inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.

Incorrect Answers

A:

A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server. “Suppress all ICMPv6 router advertisements while expecting SLAAC to work” does not implement the control that the facts call for. Instead, enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

B:

A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server. “Use an arbitrary /120 advertised prefix while assuming all clients implement normal /64 SLAAC” does not implement the control that the facts call for. Instead, enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

D:

A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server. “Assume a link-local address proves a valid Internet-routable prefix was advertised” would not meet the requirement. Instead, enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

Question 127

Which network-layer or protocol behavior most directly explains the result in this case: A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server.

  1. For this LAN, collapsed-core designs combine core and distribution functions, while spine-leaf fabrics use a consistent leaf-to-spine forwarding structure and equal-cost paths.
  2. For this LAN, sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.
  3. For this LAN, a Layer 2 switch learns source MAC addresses on ingress ports, forwards known unicasts toward one port, and floods unknown unicast within the associated VLAN.
  4. For this LAN, controller-managed WLANs separate centralized policy and management from the radio access point's client-facing RF service.

Explanation

Correct Answer

B:

SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing. Enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

Incorrect Answers

A:

“Collapsed-core designs combine core and distribution functions, while spine-leaf fabrics use a consistent leaf-to-spine forwarding structure and equal-cost paths” alone does not establish all the required behavior. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

C:

“A Layer 2 switch learns source MAC addresses on ingress ports, forwards known unicasts toward one port, and floods unknown unicast within the associated VLAN” pertains to mac learning, not the deciding condition here. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

D:

A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server. “Controller-managed WLANs separate centralized policy and management from the radio access point's client-facing RF service” pertains to wireless ap, not the deciding condition here. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

Question 128

After correcting 'A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server.', which observation is the strongest evidence that the specific requirement is met?

  1. For this LAN, show mac address-table dynamic displays the learned source and its current interface; subsequent traffic reaches only the correct destination port.
  2. For this LAN, client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.
  3. For this LAN, traffic follows intended redundant links with acceptable convergence, and topology diagrams show the chosen hierarchy or fabric connectivity.
  4. For this LAN, the intended SSID and security policy appear consistently on joined APs, and authenticated clients roam using the same authorized WLAN.

Explanation

Correct Answer

B:

After correcting 'A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing. Enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

Incorrect Answers

A:

“Show mac address-table dynamic displays the learned source and its current interface; subsequent traffic reaches only the correct destination port” pertains to mac learning, not the deciding condition here. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

C:

“Traffic follows intended redundant links with acceptable convergence, and topology diagrams show the chosen hierarchy or fabric connectivity” alone does not establish all the required behavior. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

D:

“The intended SSID and security policy appear consistently on joined APs, and authenticated clients roam using the same authorized WLAN” pertains to wireless ap, not the deciding condition here. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

Question 129

An operator is triaging the issue 'A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server.'. What should be inspected to isolate the actual cause?

  1. For this LAN, inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.
  2. For this LAN, inspect show mac address-table vlan 20, learned MAC age and ingress VLAN membership before modifying trunks.
  3. For this LAN, trace physical uplinks, check routed adjacency and ECMP entries, compare oversubscription and failure domains.
  4. For this LAN, inspect AP join status, WLC WLAN profile, mapped policy profile, RF state and client association details.

Explanation

Correct Answer

A:

The investigation 'For this LAN, inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.' examines the variables most likely to explain ipv6 slaac and router advertisement in this situation: A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server. Those checks are directly tied to the behavior that sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing. The engineer can correlate this evidence with the expected outcome that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds. and decide whether to enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

Incorrect Answers

B:

“Inspect show mac address-table vlan 20, learned MAC age and ingress VLAN membership before modifying trunks” pertains to mac learning, not the deciding condition here. Inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.

C:

“Trace physical uplinks, check routed adjacency and ECMP entries, compare oversubscription and failure domains” would not be the most direct first check for this failure. Inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.

D:

“Inspect AP join status, WLC WLAN profile, mapped policy profile, RF state and client association details” pertains to wireless ap, not the deciding condition here. Inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.

Question 130

For this incident: A new IPv6 office subnet needs hosts to auto-form addresses from router advertisements without a DHCPv6 address server. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this LAN, collect targeted evidence to inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.
  2. For this LAN, suppress all ICMPv6 router advertisements while expecting SLAAC to work.
  3. For this LAN, enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.
  4. For this LAN, confirm the repair by checking that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.
  5. For this LAN, assume a link-local address proves a valid Internet-routable prefix was advertised.

Explanation

Correct Answer

B:

“Suppress all ICMPv6 router advertisements while expecting SLAAC to work” would violate the requirement. The appropriate control instead is to enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

E:

“Assume a link-local address proves a valid Internet-routable prefix was advertised” would violate the requirement. The appropriate control instead is to enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients.

Incorrect Answers

A:

“collect targeted evidence to inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

C:

“enable IPv6 unicast routing and advertise the correct /64 prefix in router advertisements for SLAAC clients” is the controlled implementation, not an unsafe workaround. Confirm that sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

D:

“confirm the repair by checking that client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests