Cisco 200-301 Practice Test 17 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 17

Question 160

Network review: An enterprise needs an isolated management routing domain using the same physical routed chassis as the data network. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this LAN, use separate VRF routing instances and bind the correct interfaces to each tenant routing table.
  2. For this LAN, confirm the repair by checking that show ip route vrf RED and show ip route vrf BLUE differ; probes stay isolated unless an explicit route-leak policy is added.
  3. For this LAN, put both tenants in the same default VRF and assume overlapping prefixes remain isolated.
  4. For this LAN, collect targeted evidence to check per-VRF interface membership, per-VRF routes, route leaking configuration and tenant-specific ping vrf.
  5. For this LAN, replace per-VRF route tables with merely different Layer 2 port descriptions.

Explanation

Correct Answer

C:

“Put both tenants in the same default VRF and assume overlapping prefixes remain isolated” would violate the requirement. The appropriate control instead is to use separate VRF routing instances and bind the correct interfaces to each tenant routing table.

E:

“Replace per-VRF route tables with merely different Layer 2 port descriptions” would violate the requirement. The appropriate control instead is to use separate VRF routing instances and bind the correct interfaces to each tenant routing table.

Incorrect Answers

A:

“use separate VRF routing instances and bind the correct interfaces to each tenant routing table” is the controlled implementation, not an unsafe workaround. Confirm that show ip route vrf RED and show ip route vrf BLUE differ; probes stay isolated unless an explicit route-leak policy is added.

B:

“confirm the repair by checking that show ip route vrf RED and show ip route vrf BLUE differ; probes stay isolated unless an explicit route-leak policy is added” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that show ip route vrf RED and show ip route vrf BLUE differ; probes stay isolated unless an explicit route-leak policy is added.

D:

“collect targeted evidence to check per-VRF interface membership, per-VRF routes, route leaking configuration and tenant-specific ping vrf” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that show ip route vrf RED and show ip route vrf BLUE differ; probes stay isolated unless an explicit route-leak policy is added.

Question 161

Consider this operational failure: A finance printer is cabled to Fa0/12 but receives a DHCP address from the guest VLAN instead of VLAN 30. What should the administrator implement first?

  1. Change the router's default route without correcting the access VLAN.
  2. Configure the access interface for the intended VLAN and verify the VLAN exists and is active.
  3. Configure an access port as a trunk to a normal workstation to hide the VLAN mismatch.
  4. Disable all VLAN membership checks because DHCP succeeded on another VLAN.

Explanation

Correct Answer

B:

The action 'Configure the access interface for the intended VLAN and verify the VLAN exists and is active.' directly addresses the vlan access port assignment requirement in this situation: A finance printer is cabled to Fa0/12 but receives a DHCP address from the guest VLAN instead of VLAN 30. The relevant network mechanism is that an access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain. A successful change should show that show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network. To distinguish a genuine correction from a superficial change, inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway.

Incorrect Answers

A:

“Change the router's default route without correcting the access VLAN” does not implement the control that the facts call for. Instead, configure the access interface for the intended VLAN and verify the VLAN exists and is active.

C:

“Configure an access port as a trunk to a normal workstation to hide the VLAN mismatch” does not implement the control that the facts call for. Instead, configure the access interface for the intended VLAN and verify the VLAN exists and is active.

D:

“Disable all VLAN membership checks because DHCP succeeded on another VLAN” would not meet the requirement. Instead, configure the access interface for the intended VLAN and verify the VLAN exists and is active.

Question 162

While troubleshooting 'A finance printer is cabled to Fa0/12 but receives a DHCP address from the guest VLAN instead of VLAN 30.', which underlying protocol rule should guide the decision?

  1. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.
  2. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
  3. PortFast lets an edge port enter forwarding without standard listening/learning delays; BPDU Guard errdisables the port upon receiving a BPDU.
  4. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

Explanation

Correct Answer

D:

An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain. Show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network.

Incorrect Answers

A:

The choice “The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC” concerns rapid pvst root bridge priority; it does not resolve the stated requirement. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

B:

“Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge” pertains to stp root port path cost, not the deciding condition here. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

C:

“PortFast lets an edge port enter forwarding without standard listening/learning delays; BPDU Guard errdisables the port upon receiving a BPDU” would not be the most direct first check for this failure. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

Question 163

Which measurable result should be checked before closing this ticket: A finance printer is cabled to Fa0/12 but receives a DHCP address from the guest VLAN instead of VLAN 30.

  1. A normal host port forwards promptly; a test BPDU triggers errdisable and syslog rather than permitting an unauthorized loop.
  2. show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role.
  3. show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network.
  4. show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

Explanation

Correct Answer

C:

Show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network.

Incorrect Answers

A:

“A normal host port forwards promptly; a test BPDU triggers errdisable and syslog rather than permitting an unauthorized loop” alone does not establish all the required behavior. Show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network.

B:

The choice “show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role” concerns stp root port path cost; it does not resolve the stated requirement. Show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network.

D:

The choice “show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it” concerns rapid pvst root bridge priority; it does not resolve the stated requirement. Show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network.

Question 164

Before modifying more devices to address 'A finance printer is cabled to Fa0/12 but receives a DHCP address from the guest VLAN instead of VLAN 30.', which diagnostic evidence is most relevant?

  1. Inspect show spanning-tree interface detail, show interfaces status err-disabled and BPDU Guard logs.
  2. Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.
  3. Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.
  4. Inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway.

Explanation

Correct Answer

D:

The investigation 'Inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway.' examines the variables most likely to explain vlan access port assignment in this situation: A finance printer is cabled to Fa0/12 but receives a DHCP address from the guest VLAN instead of VLAN 30. Those checks are directly tied to the behavior that an access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain. The engineer can correlate this evidence with the expected outcome that show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network. and decide whether to configure the access interface for the intended VLAN and verify the VLAN exists and is active.

Incorrect Answers

A:

“Inspect show spanning-tree interface detail, show interfaces status err-disabled and BPDU Guard logs” would not be the most direct first check for this failure. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

B:

The choice “Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches” concerns rapid pvst root bridge priority; it does not resolve the stated requirement. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

C:

“Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names” pertains to stp root port path cost, not the deciding condition here. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

Question 165

A change board considers the issue 'A finance printer is cabled to Fa0/12 but receives a DHCP address from the guest VLAN instead of VLAN 30.'. Identify the TWO decisions that should be rejected. Select TWO answers.

  1. Confirm the repair by checking that show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network.
  2. Collect targeted evidence to inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway.
  3. Configure an access port as a trunk to a normal workstation to hide the VLAN mismatch.
  4. Configure the access interface for the intended VLAN and verify the VLAN exists and is active.
  5. Change the router's default route without correcting the access VLAN.

Explanation

Correct Answer

C:

“Configure an access port as a trunk to a normal workstation to hide the VLAN mismatch” would violate the requirement. The appropriate control instead is to configure the access interface for the intended VLAN and verify the VLAN exists and is active.

E:

“Change the router's default route without correcting the access VLAN” would violate the requirement.

Incorrect Answers

A:

“Confirm the repair by checking that show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network” adds a relevant safeguard or verification step rather than weakening the solution.

B:

“Collect targeted evidence to inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network.

D:

“Configure the access interface for the intended VLAN and verify the VLAN exists and is active” is the controlled implementation, not an unsafe workaround.

Question 166

A network operator receives this ticket: A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. Which configuration is best suited to the reported issue?

  1. For this switching domain, change the router's default route without correcting the access VLAN.
  2. For this switching domain, disable all VLAN membership checks because DHCP succeeded on another VLAN.
  3. For this switching domain, configure an access port as a trunk to a normal workstation to hide the VLAN mismatch.
  4. For this switching domain, configure the access interface for the intended VLAN and verify the VLAN exists and is active.

Explanation

Correct Answer

D:

The action 'For this switching domain, configure the access interface for the intended VLAN and verify the VLAN exists and is active.' directly addresses the vlan access port assignment requirement in this situation: A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. The relevant network mechanism is that an access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain. A successful change should show that show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network. To distinguish a genuine correction from a superficial change, inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway.

Incorrect Answers

A:

A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. “Change the router's default route without correcting the access VLAN” does not implement the control that the facts call for. Instead, configure the access interface for the intended VLAN and verify the VLAN exists and is active.

B:

A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. “Disable all VLAN membership checks because DHCP succeeded on another VLAN” would not meet the requirement. Instead, configure the access interface for the intended VLAN and verify the VLAN exists and is active.

C:

A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. “Configure an access port as a trunk to a normal workstation to hide the VLAN mismatch” does not implement the control that the facts call for. Instead, configure the access interface for the intended VLAN and verify the VLAN exists and is active.

Question 167

Which network-layer or protocol behavior most directly explains the result in this case: A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10.

  1. For this switching domain, an access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.
  2. For this switching domain, portFast lets an edge port enter forwarding without standard listening/learning delays; BPDU Guard errdisables the port upon receiving a BPDU.
  3. For this switching domain, non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
  4. For this switching domain, the root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

Explanation

Correct Answer

A:

A network operator receives this ticket: A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

Incorrect Answers

B:

“PortFast lets an edge port enter forwarding without standard listening/learning delays; BPDU Guard errdisables the port upon receiving a BPDU” alone does not establish all the required behavior. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

C:

The choice “non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge” concerns stp root port path cost; it does not resolve the stated requirement. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

D:

A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. The choice “the root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC” concerns rapid pvst root bridge priority; it does not resolve the stated requirement. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

Question 168

After correcting 'A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10.', which observation is the strongest evidence that the specific requirement is met?

  1. For this switching domain, a normal host port forwards promptly; a test BPDU triggers errdisable and syslog rather than permitting an unauthorized loop.
  2. For this switching domain, show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network.
  3. For this switching domain, show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.
  4. For this switching domain, show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role.

Explanation

Correct Answer

B:

Because a network operator receives this ticket: A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10, an access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

Incorrect Answers

A:

“A normal host port forwards promptly; a test BPDU triggers errdisable and syslog rather than permitting an unauthorized loop” alone does not establish all the required behavior. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

C:

The choice “show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it” concerns rapid pvst root bridge priority; it does not resolve the stated requirement. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

D:

The choice “show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role” concerns stp root port path cost; it does not resolve the stated requirement. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

Question 169

An operator is triaging the issue 'A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10.'. What should be inspected to isolate the actual cause?

  1. For this switching domain, inspect show spanning-tree interface detail, show interfaces status err-disabled and BPDU Guard logs.
  2. For this switching domain, compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.
  3. For this switching domain, compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.
  4. For this switching domain, inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway.

Explanation

Correct Answer

D:

Inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway. An access switchport assigns untagged host frames to one configured VLAN; the VLAN ID determines its Layer 2 broadcast domain.

Incorrect Answers

A:

“Inspect show spanning-tree interface detail, show interfaces status err-disabled and BPDU Guard logs” would not be the most direct first check for this failure. Inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway.

B:

“Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names” pertains to stp root port path cost, not the deciding condition here. Inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway.

C:

“Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches” pertains to rapid pvst root bridge priority, not the deciding condition here. Inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway.

Question 170

For this incident: A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this switching domain, configure the access interface for the intended VLAN and verify the VLAN exists and is active.
  2. For this switching domain, collect targeted evidence to inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway.
  3. For this switching domain, configure an access port as a trunk to a normal workstation to hide the VLAN mismatch.
  4. For this switching domain, change the router's default route without correcting the access VLAN.
  5. For this switching domain, confirm the repair by checking that show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network.

Explanation

Correct Answer

C:

“Configure an access port as a trunk to a normal workstation to hide the VLAN mismatch” would violate the requirement.

D:

A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. Which TWO practices introduce avoidable network risk. “Change the router's default route without correcting the access VLAN” would violate the requirement.

Incorrect Answers

A:

A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. Which TWO practices introduce avoidable network risk. “configure the access interface for the intended VLAN and verify the VLAN exists and is active” is the controlled implementation, not an unsafe workaround.

B:

“collect targeted evidence to inspect show vlan brief, show interfaces Fa0/12 switchport, MAC address table and learned DHCP gateway” adds a relevant safeguard or verification step rather than weakening the solution.

E:

A user moves departments and their wired workstation should be in VLAN 40, but its switch access port is in VLAN 10. Which TWO practices introduce avoidable network risk. “confirm the repair by checking that show interfaces switchport reports access mode and the expected VLAN; the client receives DHCP and ARP from the correct network” adds a relevant safeguard or verification step rather than weakening the solution.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests