Cisco 200-301 Practice Test 11 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 11

Question 100

Network review: An employee laptop uses 192.168.44.102/26 and cannot decide whether 192.168.44.120 is on-link. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this LAN, collect targeted evidence to calculate last-octet block boundaries using 64, compare ipconfig or show ip interface and test ARP to the peer.
  2. For this LAN, assign 192.168.44.127 as a normal host address on that /26.
  3. For this LAN, use 192.168.44.0/26 as the connected network for host .73.
  4. For this LAN, treat 192.168.44.64/26 as the connected subnet with usable hosts .65 through .126 and broadcast .127.
  5. For this LAN, confirm the repair by checking that the host uses direct ARP for .120 but routes traffic outside 192.168.44.64/26 to a gateway; network and broadcast are not assigned.

Explanation

Correct Answer

B:

An employee laptop uses 192.168.44.102/26 and cannot decide whether 192.168.44.120 is on-link. “Assign 192.168.44.127 as a normal host address on that /26” would violate the requirement. A /26 mask is 255.255.255.192, giving 64-address blocks; both.73 and.102 belong to the.64-.127 block.

C:

An employee laptop uses 192.168.44.102/26 and cannot decide whether 192.168.44.120 is on-link. “Use 192.168.44.0/26 as the connected network for host.73” would violate the requirement. A /26 mask is 255.255.255.192, giving 64-address blocks; both.73 and.102 belong to the.64-.127 block.

Incorrect Answers

A:

An employee laptop uses 192.168.44.102/26 and cannot decide whether 192.168.44.120 is on-link. “collect targeted evidence to calculate last-octet block boundaries using 64, compare ipconfig or show ip interface and test ARP to the peer” adds a relevant safeguard or verification step rather than weakening the solution. A /26 mask is 255.255.255.192, giving 64-address blocks; both .73 and .102 belong to the .64-.127 block.

D:

An employee laptop uses 192.168.44.102/26 and cannot decide whether 192.168.44.120 is on-link. “treat 192.168.44.64/26 as the connected subnet with usable hosts .65 through .126 and broadcast .127” is the controlled implementation, not an unsafe workaround. A /26 mask is 255.255.255.192, giving 64-address blocks; both .73 and .102 belong to the .64-.127 block.

E:

“confirm the repair by checking that the host uses direct ARP for .120 but routes traffic outside 192.168.44.64/26 to a gateway; network and broadcast are not assigned” adds a relevant safeguard or verification step rather than weakening the solution. A /26 mask is 255.255.255.192, giving 64-address blocks; both .73 and .102 belong to the .64-.127 block.

Question 101

Consider this operational failure: A test VLAN is addressed 10.18.9.100/27 and the engineering team must choose its gateway. What should the administrator implement first?

  1. Assign .127 as a host without considering broadcast address.
  2. Use subnet 10.18.9.96/27 with usable .97-.126 and broadcast 10.18.9.127.
  3. Assign the .96 network identifier as the default gateway.
  4. Use 10.18.9.128 as an on-link host within the /27.

Explanation

Correct Answer

B:

The action 'Use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.' directly addresses the ipv4 /27 usable range requirement in this situation: A test VLAN is addressed 10.18.9.100/27 and the engineering team must choose its gateway. The relevant network mechanism is that a /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127. A successful change should show that a gateway in.97-.126 responds to ARP;.96 remains the network address and.127 the broadcast address. To distinguish a genuine correction from a superficial change, compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.

Incorrect Answers

A:

“Assign.127 as a host without considering broadcast address” does not implement the control that the facts call for. Instead, use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

C:

“Assign the.96 network identifier as the default gateway” does not implement the control that the facts call for. Instead, use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

D:

“Use 10.18.9.128 as an on-link host within the /27” does not implement the control that the facts call for. Instead, use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

Question 102

While troubleshooting 'A test VLAN is addressed 10.18.9.100/27 and the engineering team must choose its gateway.', which underlying protocol rule should guide the decision?

  1. TCP sequence and acknowledgement numbers, sliding windows and retransmission support reliable ordered delivery; UDP does not provide these guarantees itself.
  2. A /27 mask is 255.255.255.224 and creates 32-address blocks; .100 and .112 are in .96-.127.
  3. Duplex mismatch creates collisions or late collisions on one end and FCS or runts on the other even while link LEDs remain up.
  4. UDP has minimal transport setup and no built-in stream retransmission; applications must implement any needed recovery or sequencing.

Explanation

Correct Answer

B:

A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127. A gateway in.97-.126 responds to ARP;.96 remains the network address and.127 the broadcast address.

Incorrect Answers

A:

The choice “TCP sequence and acknowledgement numbers, sliding windows and retransmission support reliable ordered delivery; UDP does not provide these guarantees itself” concerns tcp ordering; it does not resolve the stated requirement. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

C:

“Duplex mismatch creates collisions or late collisions on one end and FCS or runts on the other even while link LEDs remain up” pertains to duplex mismatch on ethernet, not the deciding condition here. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

D:

“UDP has minimal transport setup and no built-in stream retransmission; applications must implement any needed recovery or sequencing” would not be the most direct first check for this failure. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

Question 103

Which measurable result should be checked before closing this ticket: A test VLAN is addressed 10.18.9.100/27 and the engineering team must choose its gateway.

  1. A gateway in .97-.126 responds to ARP; .96 remains the network address and .127 the broadcast address.
  2. A lost segment is retransmitted and the receiving application reconstructs the original ordered stream without duplicate records.
  3. Packet capture shows UDP datagrams on intended ports and observed jitter and loss remain within the application budget.
  4. show interfaces counters stop increasing and file transfers sustain expected throughput after both ports agree on duplex.

Explanation

Correct Answer

A:

The observation 'A gateway in.97-.126 responds to ARP;.96 remains the network address and.127 the broadcast address.' specifically demonstrates a successful outcome for ipv4 /27 usable range in this case: A test VLAN is addressed 10.18.9.100/27 and the engineering team must choose its gateway. That observation tests the underlying mechanism that a /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127. If it fails, compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP. to isolate the remaining defect.

Incorrect Answers

B:

The choice “A lost segment is retransmitted and the receiving application reconstructs the original ordered stream without duplicate records” concerns tcp ordering; it does not resolve the stated requirement. A gateway in.97-.126 responds to ARP;.96 remains the network address and.127 the broadcast address.

C:

“Packet capture shows UDP datagrams on intended ports and observed jitter and loss remain within the application budget” alone does not establish all the required behavior. A gateway in.97-.126 responds to ARP;.96 remains the network address and.127 the broadcast address.

D:

“Show interfaces counters stop increasing and file transfers sustain expected throughput after both ports agree on duplex” pertains to duplex mismatch on ethernet, not the deciding condition here. A gateway in.97-.126 responds to ARP;.96 remains the network address and.127 the broadcast address.

Question 104

Before modifying more devices to address 'A test VLAN is addressed 10.18.9.100/27 and the engineering team must choose its gateway.', which diagnostic evidence is most relevant?

  1. Inspect a packet capture for SYN handshake, sequence gaps, ACKs and retransmissions and compare application error logs.
  2. Compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.
  3. Inspect UDP source/destination ports, application sequence numbers and jitter/loss metrics rather than expecting TCP ACKs.
  4. Inspect both ends' speed/duplex settings and show interfaces collision, late-collision, FCS and runts counters.

Explanation

Correct Answer

B:

The investigation 'Compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.' examines the variables most likely to explain ipv4 /27 usable range in this situation: A test VLAN is addressed 10.18.9.100/27 and the engineering team must choose its gateway. Those checks are directly tied to the behavior that a /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127. The engineer can correlate this evidence with the expected outcome that a gateway in.97-.126 responds to ARP;.96 remains the network address and.127 the broadcast address. and decide whether to use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

Incorrect Answers

A:

“Inspect a packet capture for SYN handshake, sequence gaps, ACKs and retransmissions and compare application error logs” pertains to tcp ordering, not the deciding condition here. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

C:

“Inspect UDP source/destination ports, application sequence numbers and jitter/loss metrics rather than expecting TCP ACKs” would not be the most direct first check for this failure. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

D:

“Inspect both ends' speed/duplex settings and show interfaces collision, late-collision, FCS and runts counters” pertains to duplex mismatch on ethernet, not the deciding condition here. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

Question 105

A change board considers the issue 'A test VLAN is addressed 10.18.9.100/27 and the engineering team must choose its gateway.'. Identify the TWO decisions that should be rejected. Select TWO answers.

  1. Use subnet 10.18.9.96/27 with usable .97-.126 and broadcast 10.18.9.127.
  2. Use 10.18.9.128 as an on-link host within the /27.
  3. Assign the .96 network identifier as the default gateway.
  4. Collect targeted evidence to compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.
  5. Confirm the repair by checking that a gateway in .97-.126 responds to ARP; .96 remains the network address and .127 the broadcast address.

Explanation

Correct Answer

B:

“Use 10.18.9.128 as an on-link host within the /27” would violate the requirement.

C:

“Assign the.96 network identifier as the default gateway” would violate the requirement. The appropriate control instead is to use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

Incorrect Answers

A:

“Use subnet 10.18.9.96/27 with usable .97-.126 and broadcast 10.18.9.127” is the controlled implementation, not an unsafe workaround. Confirm that a gateway in .97-.126 responds to ARP; .96 remains the network address and .127 the broadcast address.

D:

“Collect targeted evidence to compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that a gateway in .97-.126 responds to ARP; .96 remains the network address and .127 the broadcast address.

E:

“Confirm the repair by checking that a gateway in .97-.126 responds to ARP; .96 remains the network address and .127 the broadcast address” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that a gateway in .97-.126 responds to ARP; .96 remains the network address and .127 the broadcast address.

Question 106

A network operator receives this ticket: A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125. Which configuration is best suited to the reported issue?

  1. For this LAN, use 10.18.9.128 as an on-link host within the /27.
  2. For this LAN, use subnet 10.18.9.96/27 with usable .97-.126 and broadcast 10.18.9.127.
  3. For this LAN, assign .127 as a host without considering broadcast address.
  4. For this LAN, assign the .96 network identifier as the default gateway.

Explanation

Correct Answer

B:

The action 'For this LAN, use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.' directly addresses the ipv4 /27 usable range requirement in this situation: A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125. The relevant network mechanism is that a /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127. A successful change should show that a gateway in.97-.126 responds to ARP;.96 remains the network address and.127 the broadcast address. To distinguish a genuine correction from a superficial change, compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.

Incorrect Answers

A:

A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125. “Use 10.18.9.128 as an on-link host within the /27” does not implement the control that the facts call for. Instead, use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

C:

A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125. “Assign.127 as a host without considering broadcast address” does not implement the control that the facts call for. Instead, use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

D:

A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125. “Assign the.96 network identifier as the default gateway” does not implement the control that the facts call for. Instead, use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

Question 107

Which network-layer or protocol behavior most directly explains the result in this case: A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125.

  1. For this LAN, duplex mismatch creates collisions or late collisions on one end and FCS or runts on the other even while link LEDs remain up.
  2. For this LAN, tCP sequence and acknowledgement numbers, sliding windows and retransmission support reliable ordered delivery; UDP does not provide these guarantees itself.
  3. For this LAN, a /27 mask is 255.255.255.224 and creates 32-address blocks; .100 and .112 are in .96-.127.
  4. For this LAN, uDP has minimal transport setup and no built-in stream retransmission; applications must implement any needed recovery or sequencing.

Explanation

Correct Answer

C:

A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127. Use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

Incorrect Answers

A:

A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125. “Duplex mismatch creates collisions or late collisions on one end and FCS or runts on the other even while link LEDs remain up” pertains to duplex mismatch on ethernet, not the deciding condition here. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

B:

“TCP sequence and acknowledgement numbers, sliding windows and retransmission support reliable ordered delivery; UDP does not provide these guarantees itself” pertains to tcp ordering, not the deciding condition here. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

D:

“UDP has minimal transport setup and no built-in stream retransmission; applications must implement any needed recovery or sequencing” alone does not establish all the required behavior. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

Question 108

After correcting 'A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125.', which observation is the strongest evidence that the specific requirement is met?

  1. For this LAN, a gateway in .97-.126 responds to ARP; .96 remains the network address and .127 the broadcast address.
  2. For this LAN, show interfaces counters stop increasing and file transfers sustain expected throughput after both ports agree on duplex.
  3. For this LAN, a lost segment is retransmitted and the receiving application reconstructs the original ordered stream without duplicate records.
  4. For this LAN, packet capture shows UDP datagrams on intended ports and observed jitter and loss remain within the application budget.

Explanation

Correct Answer

A:

The observation 'For this LAN, a gateway in.97-.126 responds to ARP;.96 remains the network address and.127 the broadcast address.' specifically demonstrates a successful outcome for ipv4 /27 usable range in this case: A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125. That observation tests the underlying mechanism that a /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127. If it fails, compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP. to isolate the remaining defect.

Incorrect Answers

B:

“Show interfaces counters stop increasing and file transfers sustain expected throughput after both ports agree on duplex” pertains to duplex mismatch on ethernet, not the deciding condition here. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

C:

“A lost segment is retransmitted and the receiving application reconstructs the original ordered stream without duplicate records” pertains to tcp ordering, not the deciding condition here. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

D:

“Packet capture shows UDP datagrams on intended ports and observed jitter and loss remain within the application budget” alone does not establish all the required behavior. A /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127.

Question 109

An operator is triaging the issue 'A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125.'. What should be inspected to isolate the actual cause?

  1. For this LAN, inspect both ends' speed/duplex settings and show interfaces collision, late-collision, FCS and runts counters.
  2. For this LAN, inspect a packet capture for SYN handshake, sequence gaps, ACKs and retransmissions and compare application error logs.
  3. For this LAN, compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.
  4. For this LAN, inspect UDP source/destination ports, application sequence numbers and jitter/loss metrics rather than expecting TCP ACKs.

Explanation

Correct Answer

C:

The investigation 'For this LAN, compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.' examines the variables most likely to explain ipv4 /27 usable range in this situation: A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125. Those checks are directly tied to the behavior that a /27 mask is 255.255.255.224 and creates 32-address blocks;.100 and.112 are in.96-.127. The engineer can correlate this evidence with the expected outcome that a gateway in.97-.126 responds to ARP;.96 remains the network address and.127 the broadcast address. and decide whether to use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

Incorrect Answers

A:

“Inspect both ends' speed/duplex settings and show interfaces collision, late-collision, FCS and runts counters” pertains to duplex mismatch on ethernet, not the deciding condition here. Compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.

B:

“Inspect a packet capture for SYN handshake, sequence gaps, ACKs and retransmissions and compare application error logs” pertains to tcp ordering, not the deciding condition here. Compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.

D:

“Inspect UDP source/destination ports, application sequence numbers and jitter/loss metrics rather than expecting TCP ACKs” would not be the most direct first check for this failure. Compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.

Question 110

For this incident: A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this LAN, confirm the repair by checking that a gateway in .97-.126 responds to ARP; .96 remains the network address and .127 the broadcast address.
  2. For this LAN, collect targeted evidence to compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP.
  3. For this LAN, use subnet 10.18.9.96/27 with usable .97-.126 and broadcast 10.18.9.127.
  4. For this LAN, use 10.18.9.128 as an on-link host within the /27.
  5. For this LAN, assign the .96 network identifier as the default gateway.

Explanation

Correct Answer

D:

“Use 10.18.9.128 as an on-link host within the /27” would violate the requirement. The appropriate control instead is to use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

E:

A lab host is 10.18.9.112/27 and must communicate directly with 10.18.9.125. Which TWO practices introduce avoidable network risk. “Assign the.96 network identifier as the default gateway” would violate the requirement. The appropriate control instead is to use subnet 10.18.9.96/27 with usable.97-.126 and broadcast 10.18.9.127.

Incorrect Answers

A:

“confirm the repair by checking that a gateway in .97-.126 responds to ARP; .96 remains the network address and .127 the broadcast address” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that a /27 mask is 255.255.255.224 and creates 32-address blocks; .100 and .112 are in .96-.127.

B:

“collect targeted evidence to compare binary mask boundaries, host IP and gateway in show ip interface brief and verify same-subnet ARP” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that a /27 mask is 255.255.255.224 and creates 32-address blocks; .100 and .112 are in .96-.127.

C:

“use subnet 10.18.9.96/27 with usable .97-.126 and broadcast 10.18.9.127” is the controlled implementation, not an unsafe workaround. Confirm that a /27 mask is 255.255.255.224 and creates 32-address blocks; .100 and .112 are in .96-.127.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests