Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 51
Question 500
Network review: An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “Configure static routes pointing cyclically to one another with no connected exit” would violate the requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.
An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “Assume a route is installed solely because its config line appears in running-config” would violate the requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.
Incorrect Answers
An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “collect targeted evidence to inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution” adds a relevant safeguard or verification step rather than weakening the solution. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.
“ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational” is the controlled implementation, not an unsafe workaround. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.
An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “confirm the repair by checking that show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface” adds a relevant safeguard or verification step rather than weakening the solution. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.
Question 501
Consider this operational failure: A router has 192.168.50.1/24 on Gi0/0 and the routing table shows C 192.168.50.0/24 and L 192.168.50.1/32. What should the administrator implement first?
Explanation
Correct Answer
The action 'Interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.' directly addresses the local host routes and connected prefixes requirement in this situation: A router has 192.168.50.1/24 on Gi0/0 and the routing table shows C 192.168.50.0/24 and L 192.168.50.1/32. The relevant network mechanism is that cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address. A successful change should show that show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router. To distinguish a genuine correction from a superficial change, inspect show ip route connected, show ip interface brief and the interface IP/mask.
Incorrect Answers
“Treat a local route marked L as a route learned via a neighbor's OSPF LSA” does not implement the control that the facts call for. Instead, interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.
“Assume the connected /24 route implies every IP in the range is assigned to this router” would not meet the requirement. Instead, interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.
“Delete the local /32 route to force packets destined to the router's own address out another link” does not implement the control that the facts call for. Instead, interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.
Question 502
While troubleshooting 'A router has 192.168.50.1/24 on Gi0/0 and the routing table shows C 192.168.50.0/24 and L 192.168.50.1/32.', which underlying protocol rule should guide the decision?
Explanation
Correct Answer
Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address. Show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router.
Incorrect Answers
“A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route” pertains to ipv4 next-hop static route, not the deciding condition here. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
The choice “The IPv4 default route is a catch-all for destinations with no longer matching route; specific internal prefixes remain preferred” concerns ipv4 default static route; it does not resolve the stated requirement. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
“A floating static route stays out of the RIB while a lower-distance route to the same prefix is available, then becomes active when that route vanishes” pertains to floating backup static route, not the deciding condition here. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
Question 503
Which measurable result should be checked before closing this ticket: A router has 192.168.50.1/24 on Gi0/0 and the routing table shows C 192.168.50.0/24 and L 192.168.50.1/32.
Explanation
Correct Answer
Show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router.
Incorrect Answers
“Show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor” pertains to ipv4 next-hop static route, not the deciding condition here. Show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router.
“Show ip route displays S* 0.0.0.0/0 and an external traceroute follows the upstream, while local routes still use local interfaces” pertains to ipv4 default static route, not the deciding condition here. Show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router.
“Show ip route chooses the primary normally; after a controlled primary failure the backup static route appears and connectivity recovers” pertains to floating backup static route, not the deciding condition here. Show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router.
Question 504
Before modifying more devices to address 'A router has 192.168.50.1/24 on Gi0/0 and the routing table shows C 192.168.50.0/24 and L 192.168.50.1/32.', which diagnostic evidence is most relevant?
Explanation
Correct Answer
The investigation 'Inspect show ip route connected, show ip interface brief and the interface IP/mask.' examines the variables most likely to explain local host routes and connected prefixes in this situation: A router has 192.168.50.1/24 on Gi0/0 and the routing table shows C 192.168.50.0/24 and L 192.168.50.1/32. Those checks are directly tied to the behavior that cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address. The engineer can correlate this evidence with the expected outcome that show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router. and decide whether to interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.
Incorrect Answers
The choice “Inspect show ip route 0.0.0.0, recursive next-hop reachability, upstream return routing and NAT policy” concerns ipv4 default static route; it does not resolve the stated requirement. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
The choice “Inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts” concerns ipv4 next-hop static route; it does not resolve the stated requirement. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
The choice “Inspect show ip route, configured static route distance, OSPF adjacency and tracked interface reachability” concerns floating backup static route; it does not resolve the stated requirement. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
Question 505
A change board considers the issue 'A router has 192.168.50.1/24 on Gi0/0 and the routing table shows C 192.168.50.0/24 and L 192.168.50.1/32.'. Identify the TWO decisions that should be rejected. Select TWO answers.
Explanation
Correct Answer
“Treat a local route marked L as a route learned via a neighbor's OSPF LSA” would violate the requirement.
“Delete the local /32 route to force packets destined to the router's own address out another link” would violate the requirement.
Incorrect Answers
“Confirm the repair by checking that show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router.
“Collect targeted evidence to inspect show ip route connected, show ip interface brief and the interface IP/mask” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router.
“Interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network” is the controlled implementation, not an unsafe workaround.
Question 506
A network operator receives this ticket: An engineer sees a local /32 route for a router interface and assumes it is an external static route. Which configuration is best suited to the reported issue?
Explanation
Correct Answer
The action 'For this routed path, interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.' directly addresses the local host routes and connected prefixes requirement in this situation: An engineer sees a local /32 route for a router interface and assumes it is an external static route. The relevant network mechanism is that cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address. A successful change should show that show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router. To distinguish a genuine correction from a superficial change, inspect show ip route connected, show ip interface brief and the interface IP/mask.
Incorrect Answers
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “Treat a local route marked L as a route learned via a neighbor's OSPF LSA” does not implement the control that the facts call for. Instead, interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “Delete the local /32 route to force packets destined to the router's own address out another link” does not implement the control that the facts call for. Instead, interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “Assume the connected /24 route implies every IP in the range is assigned to this router” would not meet the requirement. Instead, interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.
Question 507
Which network-layer or protocol behavior most directly explains the result in this case: An engineer sees a local /32 route for a router interface and assumes it is an external static route.
Explanation
Correct Answer
Because a network operator receives this ticket: An engineer sees a local /32 route for a router interface and assumes it is an external static route, cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address. Interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.
Incorrect Answers
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route” pertains to ipv4 next-hop static route, not the deciding condition here. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
“The IPv4 default route is a catch-all for destinations with no longer matching route; specific internal prefixes remain preferred” pertains to ipv4 default static route, not the deciding condition here. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “A floating static route stays out of the RIB while a lower-distance route to the same prefix is available, then becomes active when that route vanishes” pertains to floating backup static route, not the deciding condition here. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
Question 508
After correcting 'An engineer sees a local /32 route for a router interface and assumes it is an external static route.', which observation is the strongest evidence that the specific requirement is met?
Explanation
Correct Answer
Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address. Interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network.
Incorrect Answers
“Show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor” pertains to ipv4 next-hop static route, not the deciding condition here. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
“Show ip route displays S* 0.0.0.0/0 and an external traceroute follows the upstream, while local routes still use local interfaces” pertains to ipv4 default static route, not the deciding condition here. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
“Show ip route chooses the primary normally; after a controlled primary failure the backup static route appears and connectivity recovers” pertains to floating backup static route, not the deciding condition here. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
Question 509
An operator is triaging the issue 'An engineer sees a local /32 route for a router interface and assumes it is an external static route.'. What should be inspected to isolate the actual cause?
Explanation
Correct Answer
Inspect show ip route connected, show ip interface brief and the interface IP/mask. Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address.
Incorrect Answers
“Inspect show ip route 0.0.0.0, recursive next-hop reachability, upstream return routing and NAT policy” pertains to ipv4 default static route, not the deciding condition here. Inspect show ip route connected, show ip interface brief and the interface IP/mask.
“Inspect show ip route, configured static route distance, OSPF adjacency and tracked interface reachability” pertains to floating backup static route, not the deciding condition here. Inspect show ip route connected, show ip interface brief and the interface IP/mask.
“Inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts” pertains to ipv4 next-hop static route, not the deciding condition here. Inspect show ip route connected, show ip interface brief and the interface IP/mask.
Question 510
For this incident: An engineer sees a local /32 route for a router interface and assumes it is an external static route. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “Delete the local /32 route to force packets destined to the router's own address out another link” would violate the requirement.
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “Treat a local route marked L as a route learned via a neighbor's OSPF LSA” would violate the requirement.
Incorrect Answers
“confirm the repair by checking that show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router” adds a relevant safeguard or verification step rather than weakening the solution.
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network” is the controlled implementation, not an unsafe workaround.
“collect targeted evidence to inspect show ip route connected, show ip interface brief and the interface IP/mask” adds a relevant safeguard or verification step rather than weakening the solution.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 49 - 10 Questions (Last Reviewed 30-Sep-2026)
- Cisco 200-301 Practice Test 50 - 10 Questions (Last Reviewed 29-Sep-2026)
- Cisco 200-301 Practice Test 51 - 10 Questions (Last Reviewed 28-Sep-2026)
- Cisco 200-301 Practice Test 52 - 10 Questions (Last Reviewed 27-Sep-2026)
- Cisco 200-301 Practice Test 53 - 10 Questions (Last Reviewed 26-Sep-2026)
