Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 52
Question 510
For this incident: An engineer sees a local /32 route for a router interface and assumes it is an external static route. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “Delete the local /32 route to force packets destined to the router's own address out another link” would violate the requirement.
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “Treat a local route marked L as a route learned via a neighbor's OSPF LSA” would violate the requirement.
Incorrect Answers
“confirm the repair by checking that show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router” adds a relevant safeguard or verification step rather than weakening the solution.
An engineer sees a local /32 route for a router interface and assumes it is an external static route. “interpret the local L /32 entry as the router's own interface host address and C /24 as the on-link network” is the controlled implementation, not an unsafe workaround.
“collect targeted evidence to inspect show ip route connected, show ip interface brief and the interface IP/mask” adds a relevant safeguard or verification step rather than weakening the solution.
Question 511
An engineer must resolve the following situation: Two redundant routers serve a client VLAN with one virtual default gateway but the active router fails. Select the most appropriate solution.
Explanation
Correct Answer
The action 'Configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.' directly addresses the hsrp active and standby gateways requirement in this situation: Two redundant routers serve a client VLAN with one virtual default gateway but the active router fails. The relevant network mechanism is that hSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. A successful change should show that show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure. To distinguish a genuine correction from a superficial change, inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
Incorrect Answers
“Disable the standby router's VLAN interface and expect transparent failover” would not meet the requirement. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Instead, configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
“Change an OSPF DR election priority to control HSRP active role” does not implement the control that the facts call for. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Instead, configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
“Give the routers different virtual gateway IP addresses and expect one seamless gateway identity” does not implement the control that the facts call for. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Instead, configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
Question 512
For the condition 'Two redundant routers serve a client VLAN with one virtual default gateway but the active router fails.' which networking principle best explains the correct solution?
Explanation
Correct Answer
HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
Incorrect Answers
“OSPF hello packets must match key adjacency parameters including the area ID; unequal area IDs block neighbor formation” pertains to ospf area mismatch adjacency, not the deciding condition here. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. The implementation must configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
“An OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area” pertains to ospf process activation, not the deciding condition here. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. The implementation must configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
“OSPF peers on the same link must agree on hello and dead intervals; mismatches can prevent successful adjacency” pertains to ospf hello, not the deciding condition here. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. The implementation must configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
Question 513
For this situation: Two redundant routers serve a client VLAN with one virtual default gateway but the active router fails. Which test would prove the configuration is behaving as intended?
Explanation
Correct Answer
HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
Incorrect Answers
Because two redundant routers serve a client VLAN with one virtual default gateway but the active router fails. Select the most appropriate solution, the choice “show ip ospf neighbor reports FULL and show ip ospf interface on both sides shows the same area” concerns ospf area mismatch adjacency; it does not resolve the stated requirement. Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
Two redundant routers serve a client VLAN with one virtual default gateway but the active router fails. Select the most appropriate solution. The choice “show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes” concerns ospf process activation; it does not resolve the stated requirement. Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
Because two redundant routers serve a client VLAN with one virtual default gateway but the active router fails. Select the most appropriate solution, the choice “show ip ospf neighbor progresses to FULL and show ip ospf interface reports matching interval values” concerns ospf hello; it does not resolve the stated requirement. Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
Question 514
Which inspection best distinguishes the problem mechanism in this incident: Two redundant routers serve a client VLAN with one virtual default gateway but the active router fails.
Explanation
Correct Answer
The investigation 'Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.' examines the variables most likely to explain hsrp active and standby gateways in this situation: Two redundant routers serve a client VLAN with one virtual default gateway but the active router fails. Those checks are directly tied to the behavior that hSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. The engineer can correlate this evidence with the expected outcome that show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure. and decide whether to configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
Incorrect Answers
“Inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration” pertains to ospf process activation, not the deciding condition here. Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
The choice “Compare hello/dead values, network type, area and authentication on both neighbors using show ip ospf interface” concerns ospf hello; it does not resolve the stated requirement. Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
“Inspect show ip ospf interface, hello area identifiers and relevant process network statements” pertains to ospf area mismatch adjacency, not the deciding condition here. Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
Question 515
Two bad design choices are hidden in this change plan: Two redundant routers serve a client VLAN with one virtual default gateway but the active router fails. Which TWO should not be approved? Select TWO answers.
Explanation
Correct Answer
“Disable the standby router's VLAN interface and expect transparent failover” would violate the requirement. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
“Give the routers different virtual gateway IP addresses and expect one seamless gateway identity” would violate the requirement. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
Incorrect Answers
“Confirm the repair by checking that show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure” adds a relevant safeguard or verification step rather than weakening the solution. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Confirm that show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
“Configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking” is the controlled implementation, not an unsafe workaround. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
“Collect targeted evidence to inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table” adds a relevant safeguard or verification step rather than weakening the solution. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
Question 516
On a Cisco-based network, A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. Which change most directly solves the stated requirement?
Explanation
Correct Answer
HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Confirm that show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure. If the result fails, inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
Incorrect Answers
On a Cisco-based network, A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. “Disable the standby router's VLAN interface and expect transparent failover” would not meet the requirement. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Instead, configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
On a Cisco-based network, A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. “give the routers different virtual gateway IP addresses and expect one seamless gateway identity” does not implement the control that the facts call for. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Instead, configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
On a Cisco-based network, A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. “change an OSPF DR election priority to control HSRP active role” does not implement the control that the facts call for. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Instead, configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
Question 517
A team is reviewing the design for this case: A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. What technical behavior is decisive?
Explanation
Correct Answer
A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking.
Incorrect Answers
The choice “oSPF hello packets must match key adjacency parameters including the area ID; unequal area IDs block neighbor formation” concerns ospf area mismatch adjacency; it does not resolve the stated requirement. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
The choice “oSPF peers on the same link must agree on hello and dead intervals; mismatches can prevent successful adjacency” concerns ospf hello; it does not resolve the stated requirement. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
The choice “an OSPF network statement matches local interface addresses using a wildcard mask and enables OSPF participation in that area” concerns ospf process activation; it does not resolve the stated requirement. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
Question 518
An engineer implements a fix for 'A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable.'. Which result would conclusively validate the intended change?
Explanation
Correct Answer
HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure. If this test fails, inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
Incorrect Answers
On a Cisco-based network, A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. Which change most directly solves the stated requirement. The choice “show ip ospf neighbor progresses to FULL and show ip ospf interface reports matching interval values” concerns ospf hello; it does not resolve the stated requirement. Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
On a Cisco-based network, A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. Which change most directly solves the stated requirement. The choice “show ip ospf neighbor reports FULL and show ip ospf interface on both sides shows the same area” concerns ospf area mismatch adjacency; it does not resolve the stated requirement. Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
The choice “show ip ospf neighbor reaches FULL and show ip route ospf contains the intended remote prefixes” concerns ospf process activation; it does not resolve the stated requirement. Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
Question 519
For the case 'A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable.', which targeted checks should be compared before a disruptive change?
Explanation
Correct Answer
Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
Incorrect Answers
The choice “inspect show ip protocols, network wildcard matching, show ip ospf interface and router process configuration” concerns ospf process activation; it does not resolve the stated requirement. Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
For the case 'A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. The choice “compare hello/dead values, network type, area and authentication on both neighbors using show ip ospf interface” concerns ospf hello; it does not resolve the stated requirement. Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
The choice “inspect show ip ospf interface, hello area identifiers and relevant process network statements” concerns ospf area mismatch adjacency; it does not resolve the stated requirement. Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
Question 520
Network review: A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. “Give the routers different virtual gateway IP addresses and expect one seamless gateway identity” would violate the requirement. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. “Disable the standby router's VLAN interface and expect transparent failover” would violate the requirement. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
Incorrect Answers
A campus uses HSRP group 10 and wants the gateway role to fail over when its primary router becomes unavailable. “confirm the repair by checking that show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure” adds a relevant safeguard or verification step rather than weakening the solution. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Confirm that show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
“configure HSRP with a shared virtual IPv4 address, priorities and optional preemption or interface tracking” is the controlled implementation, not an unsafe workaround. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Confirm that show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
“collect targeted evidence to inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table” adds a relevant safeguard or verification step rather than weakening the solution. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades. Confirm that show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 50 - 10 Questions (Last Reviewed 29-Sep-2026)
- Cisco 200-301 Practice Test 51 - 10 Questions (Last Reviewed 28-Sep-2026)
- Cisco 200-301 Practice Test 52 - 10 Questions (Last Reviewed 27-Sep-2026)
- Cisco 200-301 Practice Test 53 - 10 Questions (Last Reviewed 26-Sep-2026)
- Cisco 200-301 Practice Test 54 - 10 Questions (Last Reviewed 25-Sep-2026)
