Cisco 200-301 Practice Test 49 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 49

Question 480

Network review: A multiaccess OSPF segment has an underpowered edge box as DR and planners want a more suitable router preferred at the next election. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this routed path, choose OSPF interface priorities and plan the adjacency restart or election conditions as necessary.
  2. For this routed path, confirm the repair by checking that show ip ospf neighbor shows intended DR/BDR after a controlled election and show ip ospf interface lists priorities.
  3. For this routed path, expect a new higher-priority router to automatically preempt an existing elected DR.
  4. For this routed path, collect targeted evidence to inspect OSPF network type, neighbor DR/BDR identities, interface priorities and router IDs.
  5. For this routed path, set a router priority to 0 and expect it to win DR election.

Explanation

Correct Answer

C:

A multiaccess OSPF segment has an underpowered edge box as DR and planners want a more suitable router preferred at the next election. “Expect a new higher-priority router to automatically preempt an existing elected DR” would violate the requirement. On a broadcast network OSPF elects DR/BDR by interface priority, then router ID for equal priorities; election is not preemptive by default.

E:

A multiaccess OSPF segment has an underpowered edge box as DR and planners want a more suitable router preferred at the next election. “Set a router priority to 0 and expect it to win DR election” would violate the requirement. On a broadcast network OSPF elects DR/BDR by interface priority, then router ID for equal priorities; election is not preemptive by default.

Incorrect Answers

A:

“choose OSPF interface priorities and plan the adjacency restart or election conditions as necessary” is the controlled implementation, not an unsafe workaround. On a broadcast network OSPF elects DR/BDR by interface priority, then router ID for equal priorities; election is not preemptive by default. Confirm that show ip ospf neighbor shows intended DR/BDR after a controlled election and show ip ospf interface lists priorities.

B:

A multiaccess OSPF segment has an underpowered edge box as DR and planners want a more suitable router preferred at the next election. “confirm the repair by checking that show ip ospf neighbor shows intended DR/BDR after a controlled election and show ip ospf interface lists priorities” adds a relevant safeguard or verification step rather than weakening the solution. On a broadcast network OSPF elects DR/BDR by interface priority, then router ID for equal priorities; election is not preemptive by default. Confirm that show ip ospf neighbor shows intended DR/BDR after a controlled election and show ip ospf interface lists priorities.

D:

A multiaccess OSPF segment has an underpowered edge box as DR and planners want a more suitable router preferred at the next election. “collect targeted evidence to inspect OSPF network type, neighbor DR/BDR identities, interface priorities and router IDs” adds a relevant safeguard or verification step rather than weakening the solution. On a broadcast network OSPF elects DR/BDR by interface priority, then router ID for equal priorities; election is not preemptive by default. Confirm that show ip ospf neighbor shows intended DR/BDR after a controlled election and show ip ospf interface lists priorities.

Question 481

Consider this operational failure: A serial routed point-to-point link should not require DR/BDR election overhead. What should the administrator implement first?

  1. Make the transit interface passive and still expect a neighbor.
  2. Use a compatible OSPF point-to-point network type on both peers where topology supports it.
  3. Assign both peers the same OSPF router ID to avoid a DR election.
  4. Force one side to broadcast and the other to incompatible point-to-point assumptions without validation.

Explanation

Correct Answer

B:

The action 'Use a compatible OSPF point-to-point network type on both peers where topology supports it.' directly addresses the ospf point-to-point network type requirement in this situation: A serial routed point-to-point link should not require DR/BDR election overhead. The relevant network mechanism is that oSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics. A successful change should show that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role. To distinguish a genuine correction from a superficial change, inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.

Incorrect Answers

A:

“Make the transit interface passive and still expect a neighbor” does not implement the control that the facts call for. Instead, use a compatible OSPF point-to-point network type on both peers where topology supports it.

C:

“Assign both peers the same OSPF router ID to avoid a DR election” does not implement the control that the facts call for. Instead, use a compatible OSPF point-to-point network type on both peers where topology supports it.

D:

“Force one side to broadcast and the other to incompatible point-to-point assumptions without validation” does not implement the control that the facts call for. Instead, use a compatible OSPF point-to-point network type on both peers where topology supports it.

Question 482

While troubleshooting 'A serial routed point-to-point link should not require DR/BDR election overhead.', which underlying protocol rule should guide the decision?

  1. On a broadcast network OSPF elects DR/BDR by interface priority, then router ID for equal priorities; election is not preemptive by default.
  2. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
  3. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.
  4. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.

Explanation

Correct Answer

C:

OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics. Show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.

Incorrect Answers

A:

“On a broadcast network OSPF elects DR/BDR by interface priority, then router ID for equal priorities; election is not preemptive by default” pertains to ospf dr, not the deciding condition here. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

B:

The choice “An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there” concerns ospf passive lan interface; it does not resolve the stated requirement. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

D:

“OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost” pertains to ospf cost, not the deciding condition here. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

Question 483

Which measurable result should be checked before closing this ticket: A serial routed point-to-point link should not require DR/BDR election overhead.

  1. show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
  2. show ip ospf neighbor shows intended DR/BDR after a controlled election and show ip ospf interface lists priorities.
  3. show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.
  4. show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN.

Explanation

Correct Answer

C:

The observation 'show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.' specifically demonstrates a successful outcome for ospf point-to-point network type in this case: A serial routed point-to-point link should not require DR/BDR election overhead. That observation tests the underlying mechanism that oSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to use a compatible OSPF point-to-point network type on both peers where topology supports it. If it fails, inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers. to isolate the remaining defect.

Incorrect Answers

A:

The choice “show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test” concerns ospf cost; it does not resolve the stated requirement. Show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.

B:

The choice “show ip ospf neighbor shows intended DR/BDR after a controlled election and show ip ospf interface lists priorities” concerns ospf dr; it does not resolve the stated requirement. Show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.

D:

The choice “show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN” concerns ospf passive lan interface; it does not resolve the stated requirement. Show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.

Question 484

Before modifying more devices to address 'A serial routed point-to-point link should not require DR/BDR election overhead.', which diagnostic evidence is most relevant?

  1. Inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables.
  2. Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity.
  3. Inspect OSPF network type, neighbor DR/BDR identities, interface priorities and router IDs.
  4. Inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.

Explanation

Correct Answer

D:

The investigation 'Inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.' examines the variables most likely to explain ospf point-to-point network type in this situation: A serial routed point-to-point link should not require DR/BDR election overhead. Those checks are directly tied to the behavior that oSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics. The engineer can correlate this evidence with the expected outcome that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role. and decide whether to use a compatible OSPF point-to-point network type on both peers where topology supports it.

Incorrect Answers

A:

The choice “Inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables” concerns ospf passive lan interface; it does not resolve the stated requirement. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

B:

The choice “Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity” concerns ospf cost; it does not resolve the stated requirement. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

C:

“Inspect OSPF network type, neighbor DR/BDR identities, interface priorities and router IDs” pertains to ospf dr, not the deciding condition here. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

Question 485

A change board considers the issue 'A serial routed point-to-point link should not require DR/BDR election overhead.'. Identify the TWO decisions that should be rejected. Select TWO answers.

  1. Make the transit interface passive and still expect a neighbor.
  2. Force one side to broadcast and the other to incompatible point-to-point assumptions without validation.
  3. Collect targeted evidence to inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.
  4. Use a compatible OSPF point-to-point network type on both peers where topology supports it.
  5. Confirm the repair by checking that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.

Explanation

Correct Answer

A:

“Make the transit interface passive and still expect a neighbor” would violate the requirement. The appropriate control instead is to use a compatible OSPF point-to-point network type on both peers where topology supports it.

B:

“Force one side to broadcast and the other to incompatible point-to-point assumptions without validation” would violate the requirement. The appropriate control instead is to use a compatible OSPF point-to-point network type on both peers where topology supports it.

Incorrect Answers

C:

“Collect targeted evidence to inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.

D:

“Use a compatible OSPF point-to-point network type on both peers where topology supports it” is the controlled implementation, not an unsafe workaround. Confirm that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.

E:

“Confirm the repair by checking that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role” adds a relevant safeguard or verification step rather than weakening the solution.

Question 486

A network operator receives this ticket: A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. Which configuration is best suited to the reported issue?

  1. For this routed path, use a compatible OSPF point-to-point network type on both peers where topology supports it.
  2. For this routed path, assign both peers the same OSPF router ID to avoid a DR election.
  3. For this routed path, make the transit interface passive and still expect a neighbor.
  4. For this routed path, force one side to broadcast and the other to incompatible point-to-point assumptions without validation.

Explanation

Correct Answer

A:

The action 'For this routed path, use a compatible OSPF point-to-point network type on both peers where topology supports it.' directly addresses the ospf point-to-point network type requirement in this situation: A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. The relevant network mechanism is that oSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics. A successful change should show that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role. To distinguish a genuine correction from a superficial change, inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.

Incorrect Answers

B:

A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. “Assign both peers the same OSPF router ID to avoid a DR election” does not implement the control that the facts call for. Instead, use a compatible OSPF point-to-point network type on both peers where topology supports it.

C:

A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. “Make the transit interface passive and still expect a neighbor” does not implement the control that the facts call for. Instead, use a compatible OSPF point-to-point network type on both peers where topology supports it.

D:

A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. “Force one side to broadcast and the other to incompatible point-to-point assumptions without validation” does not implement the control that the facts call for. Instead, use a compatible OSPF point-to-point network type on both peers where topology supports it.

Question 487

Which network-layer or protocol behavior most directly explains the result in this case: A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election.

  1. For this routed path, oSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
  2. For this routed path, an OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
  3. For this routed path, oSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.
  4. For this routed path, on a broadcast network OSPF elects DR/BDR by interface priority, then router ID for equal priorities; election is not preemptive by default.

Explanation

Correct Answer

C:

A network operator receives this ticket: A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

Incorrect Answers

A:

A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. “OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost” pertains to ospf cost, not the deciding condition here. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

B:

“An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there” pertains to ospf passive lan interface, not the deciding condition here. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

D:

A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. “On a broadcast network OSPF elects DR/BDR by interface priority, then router ID for equal priorities; election is not preemptive by default” pertains to ospf dr, not the deciding condition here. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

Question 488

After correcting 'A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election.', which observation is the strongest evidence that the specific requirement is met?

  1. For this routed path, show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
  2. For this routed path, show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.
  3. For this routed path, show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN.
  4. For this routed path, show ip ospf neighbor shows intended DR/BDR after a controlled election and show ip ospf interface lists priorities.

Explanation

Correct Answer

B:

A network operator receives this ticket: A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics. The observable acceptance condition here is: Show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.

Incorrect Answers

A:

“Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test” pertains to ospf cost, not the deciding condition here. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

C:

“Show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN” pertains to ospf passive lan interface, not the deciding condition here. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

D:

“Show ip ospf neighbor shows intended DR/BDR after a controlled election and show ip ospf interface lists priorities” pertains to ospf dr, not the deciding condition here. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

Question 489

An operator is triaging the issue 'A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election.'. What should be inspected to isolate the actual cause?

  1. For this routed path, inspect OSPF network type, neighbor DR/BDR identities, interface priorities and router IDs.
  2. For this routed path, inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables.
  3. For this routed path, inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.
  4. For this routed path, inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity.

Explanation

Correct Answer

C:

Inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers. OSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

Incorrect Answers

A:

The choice “inspect OSPF network type, neighbor DR/BDR identities, interface priorities and router IDs” concerns ospf dr; it does not resolve the stated requirement. Inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.

B:

The choice “inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables” concerns ospf passive lan interface; it does not resolve the stated requirement. Inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.

D:

The choice “inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity” concerns ospf cost; it does not resolve the stated requirement. Inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.

Question 490

For this incident: A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this routed path, use a compatible OSPF point-to-point network type on both peers where topology supports it.
  2. For this routed path, force one side to broadcast and the other to incompatible point-to-point assumptions without validation.
  3. For this routed path, collect targeted evidence to inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.
  4. For this routed path, confirm the repair by checking that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.
  5. For this routed path, make the transit interface passive and still expect a neighbor.

Explanation

Correct Answer

B:

“Force one side to broadcast and the other to incompatible point-to-point assumptions without validation” would violate the requirement.

E:

“Make the transit interface passive and still expect a neighbor” would violate the requirement.

Incorrect Answers

A:

“use a compatible OSPF point-to-point network type on both peers where topology supports it” is the controlled implementation, not an unsafe workaround. An important verification is that oSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

C:

“collect targeted evidence to inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers” adds a relevant safeguard or verification step rather than weakening the solution.

D:

A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. “confirm the repair by checking that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role” adds a relevant safeguard or verification step rather than weakening the solution.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests