Cisco 200-301 Practice Test 50 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 50

Question 490

For this incident: A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this routed path, use a compatible OSPF point-to-point network type on both peers where topology supports it.
  2. For this routed path, force one side to broadcast and the other to incompatible point-to-point assumptions without validation.
  3. For this routed path, collect targeted evidence to inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers.
  4. For this routed path, confirm the repair by checking that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role.
  5. For this routed path, make the transit interface passive and still expect a neighbor.

Explanation

Correct Answer

B:

“Force one side to broadcast and the other to incompatible point-to-point assumptions without validation” would violate the requirement.

E:

“Make the transit interface passive and still expect a neighbor” would violate the requirement.

Incorrect Answers

A:

“use a compatible OSPF point-to-point network type on both peers where topology supports it” is the controlled implementation, not an unsafe workaround. An important verification is that oSPF point-to-point network type forms an adjacency directly and does not elect a designated router; both peers need compatible network characteristics.

C:

“collect targeted evidence to inspect show ip ospf interface network type, interface addressing, MTU and neighbor state on both peers” adds a relevant safeguard or verification step rather than weakening the solution.

D:

A direct Ethernet link has only two routers and engineers need predictable OSPF adjacency type with no DR election. “confirm the repair by checking that show ip ospf interface reports point-to-point and neighbor becomes FULL without DR/BDR role” adds a relevant safeguard or verification step rather than weakening the solution.

Question 491

An engineer must resolve the following situation: A static route points toward 198.51.100.9 but its resolving connected network is missing. Select the most appropriate solution.

  1. Configure static routes pointing cyclically to one another with no connected exit.
  2. Ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.
  3. Ignore the egress interface being administratively down.
  4. Assume a route is installed solely because its config line appears in running-config.

Explanation

Correct Answer

B:

The action 'Ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.' directly addresses the recursive next-hop route resolution requirement in this situation: A static route points toward 198.51.100.9 but its resolving connected network is missing. The relevant network mechanism is that a recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. A successful change should show that show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface. To distinguish a genuine correction from a superficial change, inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.

Incorrect Answers

A:

“Configure static routes pointing cyclically to one another with no connected exit” does not implement the control that the facts call for. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Instead, ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.

C:

“Ignore the egress interface being administratively down” would not meet the requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Instead, ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.

D:

“Assume a route is installed solely because its config line appears in running-config” would not meet the requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Instead, ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.

Question 492

For the condition 'A static route points toward 198.51.100.9 but its resolving connected network is missing.' which networking principle best explains the correct solution?

  1. HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.
  2. Administrative distance expresses a routing information source's trustworthiness; Cisco connected AD 0, static AD 1 and OSPF AD 110 by default.
  3. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.
  4. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

Explanation

Correct Answer

C:

Because a static route points toward 198.51.100.9 but its resolving connected network is missing. Select the most appropriate solution, a recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.

Incorrect Answers

A:

“HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades” pertains to hsrp active, not the deciding condition here. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. The implementation must ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.

B:

The choice “Administrative distance expresses a routing information source's trustworthiness; Cisco connected AD 0, static AD 1 and OSPF AD 110 by default” concerns route administrative distance; it does not resolve the stated requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

D:

The choice “IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination” concerns longest-prefix-match forwarding; it does not resolve the stated requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

Question 493

For this situation: A static route points toward 198.51.100.9 but its resolving connected network is missing. Which test would prove the configuration is behaving as intended?

  1. show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
  2. show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.
  3. show ip route installs the lower-AD same-prefix source, while alternative sources can remain in protocol databases without taking effect.
  4. show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

Explanation

Correct Answer

B:

A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.

Incorrect Answers

A:

The choice “show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure” concerns hsrp active; it does not resolve the stated requirement. Show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.

C:

“Show ip route installs the lower-AD same-prefix source, while alternative sources can remain in protocol databases without taking effect” pertains to route administrative distance, not the deciding condition here. Show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

D:

“Show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination” pertains to longest-prefix-match forwarding, not the deciding condition here. Show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

Question 494

Which inspection best distinguishes the problem mechanism in this incident: A static route points toward 198.51.100.9 but its resolving connected network is missing.

  1. Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
  2. Inspect show ip route, show ip protocols, configured static routes and source administrative distances.
  3. Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.
  4. Inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.

Explanation

Correct Answer

C:

The investigation 'Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.' examines the variables most likely to explain recursive next-hop route resolution in this situation: A static route points toward 198.51.100.9 but its resolving connected network is missing. Those checks are directly tied to the behavior that a recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. The engineer can correlate this evidence with the expected outcome that show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface. and decide whether to ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.

Incorrect Answers

A:

“Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table” pertains to hsrp active, not the deciding condition here. Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

B:

“Inspect show ip route, show ip protocols, configured static routes and source administrative distances” pertains to route administrative distance, not the deciding condition here. Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

D:

“Inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution” pertains to longest-prefix-match forwarding, not the deciding condition here. Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

Question 495

Two bad design choices are hidden in this change plan: A static route points toward 198.51.100.9 but its resolving connected network is missing. Which TWO should not be approved? Select TWO answers.

  1. Collect targeted evidence to inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.
  2. Ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.
  3. Confirm the repair by checking that show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.
  4. Configure static routes pointing cyclically to one another with no connected exit.
  5. Assume a route is installed solely because its config line appears in running-config.

Explanation

Correct Answer

D:

“Configure static routes pointing cyclically to one another with no connected exit” would violate the requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

E:

“Assume a route is installed solely because its config line appears in running-config” would violate the requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

Incorrect Answers

A:

“Collect targeted evidence to inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution” adds a relevant safeguard or verification step rather than weakening the solution. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

B:

“Ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational” is the controlled implementation, not an unsafe workaround. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Confirm that show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.

C:

“Confirm the repair by checking that show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface” adds a relevant safeguard or verification step rather than weakening the solution. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

Question 496

On a Cisco-based network, An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. Which change most directly solves the stated requirement?

  1. For this routed path, ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.
  2. For this routed path, ignore the egress interface being administratively down.
  3. For this routed path, configure static routes pointing cyclically to one another with no connected exit.
  4. For this routed path, assume a route is installed solely because its config line appears in running-config.

Explanation

Correct Answer

A:

On a Cisco-based network, An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.

Incorrect Answers

B:

On a Cisco-based network, An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “Ignore the egress interface being administratively down” would not meet the requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Instead, ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.

C:

On a Cisco-based network, An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “configure static routes pointing cyclically to one another with no connected exit” does not implement the control that the facts call for. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Instead, ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.

D:

On a Cisco-based network, An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “Assume a route is installed solely because its config line appears in running-config” would not meet the requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Instead, ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.

Question 497

A team is reviewing the design for this case: An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. What technical behavior is decisive?

  1. For this routed path, administrative distance expresses a routing information source's trustworthiness; Cisco connected AD 0, static AD 1 and OSPF AD 110 by default.
  2. For this routed path, iP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.
  3. For this routed path, a recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.
  4. For this routed path, hSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades.

Explanation

Correct Answer

C:

Because on a Cisco-based network, An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. Which change most directly solves the stated requirement, a recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.

Incorrect Answers

A:

An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. The choice “administrative distance expresses a routing information source's trustworthiness; Cisco connected AD 0, static AD 1 and OSPF AD 110 by default” concerns route administrative distance; it does not resolve the stated requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

B:

An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. The choice “iP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination” concerns longest-prefix-match forwarding; it does not resolve the stated requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

D:

The choice “hSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades” concerns hsrp active; it does not resolve the stated requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

Question 498

An engineer implements a fix for 'An edge router sees a configured static prefix but the next hop cannot be reached by any usable path.'. Which result would conclusively validate the intended change?

  1. For this routed path, show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.
  2. For this routed path, show ip route installs the lower-AD same-prefix source, while alternative sources can remain in protocol databases without taking effect.
  3. For this routed path, show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure.
  4. For this routed path, show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

Explanation

Correct Answer

A:

Because on a Cisco-based network, An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. Which change most directly solves the stated requirement, a recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.

Incorrect Answers

B:

The choice “show ip route installs the lower-AD same-prefix source, while alternative sources can remain in protocol databases without taking effect” concerns route administrative distance; it does not resolve the stated requirement. Show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.

C:

An engineer implements a fix for 'An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. The choice “show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure” concerns hsrp active; it does not resolve the stated requirement. Show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.

D:

The choice “show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination” concerns longest-prefix-match forwarding; it does not resolve the stated requirement. Show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.

Question 499

For the case 'An edge router sees a configured static prefix but the next hop cannot be reached by any usable path.', which targeted checks should be compared before a disruptive change?

  1. For this routed path, inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.
  2. For this routed path, inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table.
  3. For this routed path, inspect show ip route, show ip protocols, configured static routes and source administrative distances.
  4. For this routed path, inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.

Explanation

Correct Answer

A:

Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof. Show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.

Incorrect Answers

B:

The choice “inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table” concerns hsrp active; it does not resolve the stated requirement. Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.

C:

The choice “inspect show ip route, show ip protocols, configured static routes and source administrative distances” concerns route administrative distance; it does not resolve the stated requirement. Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.

D:

The choice “inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution” concerns longest-prefix-match forwarding; it does not resolve the stated requirement. Inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.

Question 500

Network review: An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this routed path, collect targeted evidence to inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution.
  2. For this routed path, configure static routes pointing cyclically to one another with no connected exit.
  3. For this routed path, ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational.
  4. For this routed path, confirm the repair by checking that show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface.
  5. For this routed path, assume a route is installed solely because its config line appears in running-config.

Explanation

Correct Answer

B:

An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “Configure static routes pointing cyclically to one another with no connected exit” would violate the requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

E:

An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “Assume a route is installed solely because its config line appears in running-config” would violate the requirement. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

Incorrect Answers

A:

An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “collect targeted evidence to inspect show ip route next-hop, show ip cef destination, interface state and ARP or IPv6 neighbor resolution” adds a relevant safeguard or verification step rather than weakening the solution. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

C:

“ensure that the static next hop resolves through an active connected or other valid route and its egress interface is operational” is the controlled implementation, not an unsafe workaround. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

D:

An edge router sees a configured static prefix but the next hop cannot be reached by any usable path. “confirm the repair by checking that show ip route installs the intended static prefix and its next-hop recursion resolves to a usable exit interface” adds a relevant safeguard or verification step rather than weakening the solution. A recursive next hop must itself be reachable for a static route to be installed or used; written configuration alone is not forwarding proof.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests