Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 47
Question 460
Network review: A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “Assume Ethernet interface names determine OSPF cost independently of reference bandwidth” would violate the requirement. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “Set different reference-bandwidth policies on routers without considering inconsistent metrics” would violate the requirement. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
Incorrect Answers
“set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain” is the controlled implementation, not an unsafe workaround. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “confirm the repair by checking that show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test” adds a relevant safeguard or verification step rather than weakening the solution. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
“collect targeted evidence to inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity” adds a relevant safeguard or verification step rather than weakening the solution. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
Question 461
Consider this operational failure: A user VLAN should be advertised into OSPF but must not form neighbors with untrusted client devices. What should the administrator implement first?
Explanation
Correct Answer
The action 'Apply passive-interface to user or stub interfaces while leaving required transit links active.' directly addresses the ospf passive lan interface requirement in this situation: A user VLAN should be advertised into OSPF but must not form neighbors with untrusted client devices. The relevant network mechanism is that an OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there. A successful change should show that show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN. To distinguish a genuine correction from a superficial change, inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables.
Incorrect Answers
“Enable an OSPF neighbor on every guest endpoint to advertise the VLAN” does not implement the control that the facts call for. Instead, apply passive-interface to user or stub interfaces while leaving required transit links active.
“Make the only router-to-router transit interface passive and expect adjacency to remain” does not implement the control that the facts call for. Instead, apply passive-interface to user or stub interfaces while leaving required transit links active.
“Remove the LAN OSPF advertisement entirely instead of suppressing client-facing hellos” would not meet the requirement. Instead, apply passive-interface to user or stub interfaces while leaving required transit links active.
Question 462
While troubleshooting 'A user VLAN should be advertised into OSPF but must not form neighbors with untrusted client devices.', which underlying protocol rule should guide the decision?
Explanation
Correct Answer
An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there. Show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN.
Incorrect Answers
“A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly” pertains to ipv4 host default gateway, not the deciding condition here. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
“A floating static route stays out of the RIB while a lower-distance route to the same prefix is available, then becomes active when that route vanishes” pertains to floating backup static route, not the deciding condition here. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
The choice “A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route” concerns ipv4 next-hop static route; it does not resolve the stated requirement. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
Question 463
Which measurable result should be checked before closing this ticket: A user VLAN should be advertised into OSPF but must not form neighbors with untrusted client devices.
Explanation
Correct Answer
Show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN.
Incorrect Answers
The choice “The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN” concerns ipv4 host default gateway; it does not resolve the stated requirement. Show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN.
The choice “show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor” concerns ipv4 next-hop static route; it does not resolve the stated requirement. Show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN.
The choice “show ip route chooses the primary normally; after a controlled primary failure the backup static route appears and connectivity recovers” concerns floating backup static route; it does not resolve the stated requirement. Show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN.
Question 464
Before modifying more devices to address 'A user VLAN should be advertised into OSPF but must not form neighbors with untrusted client devices.', which diagnostic evidence is most relevant?
Explanation
Correct Answer
The investigation 'Inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables.' examines the variables most likely to explain ospf passive lan interface in this situation: A user VLAN should be advertised into OSPF but must not form neighbors with untrusted client devices. Those checks are directly tied to the behavior that an OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there. The engineer can correlate this evidence with the expected outcome that show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN. and decide whether to apply passive-interface to user or stub interfaces while leaving required transit links active.
Incorrect Answers
The choice “Inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts” concerns ipv4 next-hop static route; it does not resolve the stated requirement. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
The choice “Inspect show ip route, configured static route distance, OSPF adjacency and tracked interface reachability” concerns floating backup static route; it does not resolve the stated requirement. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
“Inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP” pertains to ipv4 host default gateway, not the deciding condition here. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
Question 465
A change board considers the issue 'A user VLAN should be advertised into OSPF but must not form neighbors with untrusted client devices.'. Identify the TWO decisions that should be rejected. Select TWO answers.
Explanation
Correct Answer
“Make the only router-to-router transit interface passive and expect adjacency to remain” would violate the requirement.
“Remove the LAN OSPF advertisement entirely instead of suppressing client-facing hellos” would violate the requirement.
Incorrect Answers
“Collect targeted evidence to inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables” adds a relevant safeguard or verification step rather than weakening the solution.
“Apply passive-interface to user or stub interfaces while leaving required transit links active” is the controlled implementation, not an unsafe workaround. Confirm that show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN.
“Confirm the repair by checking that show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN” adds a relevant safeguard or verification step rather than weakening the solution.
Question 466
A network operator receives this ticket: A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. Which configuration is best suited to the reported issue?
Explanation
Correct Answer
The action 'For this routed path, apply passive-interface to user or stub interfaces while leaving required transit links active.' directly addresses the ospf passive lan interface requirement in this situation: A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. The relevant network mechanism is that an OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there. A successful change should show that show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN. To distinguish a genuine correction from a superficial change, inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables.
Incorrect Answers
A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. “Remove the LAN OSPF advertisement entirely instead of suppressing client-facing hellos” would not meet the requirement. Instead, apply passive-interface to user or stub interfaces while leaving required transit links active.
A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. “Enable an OSPF neighbor on every guest endpoint to advertise the VLAN” does not implement the control that the facts call for. Instead, apply passive-interface to user or stub interfaces while leaving required transit links active.
A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. “Make the only router-to-router transit interface passive and expect adjacency to remain” does not implement the control that the facts call for. Instead, apply passive-interface to user or stub interfaces while leaving required transit links active.
Question 467
Which network-layer or protocol behavior most directly explains the result in this case: A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub.
Explanation
Correct Answer
Because a network operator receives this ticket: A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub, an OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
Incorrect Answers
A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. “A floating static route stays out of the RIB while a lower-distance route to the same prefix is available, then becomes active when that route vanishes” pertains to floating backup static route, not the deciding condition here. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. “A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly” pertains to ipv4 host default gateway, not the deciding condition here. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
“A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route” pertains to ipv4 next-hop static route, not the deciding condition here. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
Question 468
After correcting 'A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub.', which observation is the strongest evidence that the specific requirement is met?
Explanation
Correct Answer
A network operator receives this ticket: A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
Incorrect Answers
The choice “show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor” concerns ipv4 next-hop static route; it does not resolve the stated requirement. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
The choice “the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN” concerns ipv4 host default gateway; it does not resolve the stated requirement. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
The choice “show ip route chooses the primary normally; after a controlled primary failure the backup static route appears and connectivity recovers” concerns floating backup static route; it does not resolve the stated requirement. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
Question 469
An operator is triaging the issue 'A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub.'. What should be inspected to isolate the actual cause?
Explanation
Correct Answer
Inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables. An OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
Incorrect Answers
The choice “inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts” concerns ipv4 next-hop static route; it does not resolve the stated requirement. Inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables.
The choice “inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP” concerns ipv4 host default gateway; it does not resolve the stated requirement. Inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables.
The choice “inspect show ip route, configured static route distance, OSPF adjacency and tracked interface reachability” concerns floating backup static route; it does not resolve the stated requirement. Inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables.
Question 470
For this incident: A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. “Remove the LAN OSPF advertisement entirely instead of suppressing client-facing hellos” would violate the requirement.
A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. “Make the only router-to-router transit interface passive and expect adjacency to remain” would violate the requirement.
Incorrect Answers
“apply passive-interface to user or stub interfaces while leaving required transit links active” is the controlled implementation, not an unsafe workaround. An important verification is that an OSPF passive interface is still eligible for connected prefix advertisement but does not send OSPF hello packets or form neighbor adjacency there.
A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. “confirm the repair by checking that show ip protocols lists the intended interface passive, LAN route appears on peers, and no OSPF neighbors form on that LAN” adds a relevant safeguard or verification step rather than weakening the solution.
A router must announce a loopback prefix into OSPF while preventing hello packets on that loopback-facing stub. “collect targeted evidence to inspect show ip protocols passive interface list, show ip ospf neighbor and advertisement in routing tables” adds a relevant safeguard or verification step rather than weakening the solution.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 45 - 10 Questions (Last Reviewed 04-Oct-2026)
- Cisco 200-301 Practice Test 46 - 10 Questions (Last Reviewed 03-Oct-2026)
- Cisco 200-301 Practice Test 47 - 10 Questions (Last Reviewed 02-Oct-2026)
- Cisco 200-301 Practice Test 48 - 10 Questions (Last Reviewed 01-Oct-2026)
- Cisco 200-301 Practice Test 49 - 10 Questions (Last Reviewed 30-Sep-2026)
