Cisco 200-301 Practice Test 29 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 29

Question 280

Network review: A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this switching domain, disable loop protection because physical link state remains up.
  2. For this switching domain, confirm the repair by checking that show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.
  3. For this switching domain, collect targeted evidence to inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.
  4. For this switching domain, enable PortFast on the redundant switch-to-switch path to bypass BPDUs.
  5. For this switching domain, enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

Explanation

Correct Answer

A:

A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “Disable loop protection because physical link state remains up” would violate the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

D:

A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “Enable PortFast on the redundant switch-to-switch path to bypass BPDUs” would violate the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Incorrect Answers

B:

A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “confirm the repair by checking that show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes” adds a relevant safeguard or verification step rather than weakening the solution. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

C:

“collect targeted evidence to inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters” adds a relevant safeguard or verification step rather than weakening the solution. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

E:

A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear” is the controlled implementation, not an unsafe workaround. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Question 281

Consider this operational failure: A switch port is unlabeled and the team needs to identify the directly connected Cisco router and its interface. What should the administrator implement first?

  1. Use ping to a remote network as proof of the directly connected switchport ID.
  2. Treat LLDP neighbor entries as a Layer 3 route table for all distant devices.
  3. Use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.
  4. Assume CDP is supported and enabled on every non-Cisco vendor.

Explanation

Correct Answer

C:

The action 'Use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.' directly addresses the cdp and lldp neighbor discovery requirement in this situation: A switch port is unlabeled and the team needs to identify the directly connected Cisco router and its interface. The relevant network mechanism is that cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop. A successful change should show that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling. To distinguish a genuine correction from a superficial change, inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.

Incorrect Answers

A:

“Use ping to a remote network as proof of the directly connected switchport ID” does not implement the control that the facts call for. Instead, use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

B:

“Treat LLDP neighbor entries as a Layer 3 route table for all distant devices” does not implement the control that the facts call for. Instead, use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

D:

“Assume CDP is supported and enabled on every non-Cisco vendor” would not meet the requirement. Instead, use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

Question 282

While troubleshooting 'A switch port is unlabeled and the team needs to identify the directly connected Cisco router and its interface.', which underlying protocol rule should guide the decision?

  1. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
  2. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.
  3. EtherChannel requires compatible physical-port characteristics; the logical Port-channel's Layer 2 parameters must agree across its members.
  4. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Explanation

Correct Answer

D:

CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop. Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.

Incorrect Answers

A:

The choice “Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge” concerns stp root port path cost; it does not resolve the stated requirement. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

B:

“The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC” pertains to rapid pvst root bridge priority, not the deciding condition here. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

C:

The choice “EtherChannel requires compatible physical-port characteristics; the logical Port-channel's Layer 2 parameters must agree across its members” concerns etherchannel trunk consistency; it does not resolve the stated requirement. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Question 283

Which measurable result should be checked before closing this ticket: A switch port is unlabeled and the team needs to identify the directly connected Cisco router and its interface.

  1. Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.
  2. show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.
  3. show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role.
  4. show etherchannel summary shows all intended members bundled without suspension; show interfaces trunk reports the consistent Port-channel VLAN policy.

Explanation

Correct Answer

A:

Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling. If this test fails, cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Incorrect Answers

B:

The choice “show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it” concerns rapid pvst root bridge priority; it does not resolve the stated requirement. Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.

C:

The choice “show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role” concerns stp root port path cost; it does not resolve the stated requirement. Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.

D:

The choice “show etherchannel summary shows all intended members bundled without suspension; show interfaces trunk reports the consistent Port-channel VLAN policy” concerns etherchannel trunk consistency; it does not resolve the stated requirement. Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.

Question 284

Before modifying more devices to address 'A switch port is unlabeled and the team needs to identify the directly connected Cisco router and its interface.', which diagnostic evidence is most relevant?

  1. Inspect Port-channel config, member-port switchport output, show etherchannel detail and LACP status.
  2. Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.
  3. Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.
  4. Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.

Explanation

Correct Answer

C:

The investigation 'Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.' examines the variables most likely to explain cdp and lldp neighbor discovery in this situation: A switch port is unlabeled and the team needs to identify the directly connected Cisco router and its interface. Those checks are directly tied to the behavior that cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop. The engineer can correlate this evidence with the expected outcome that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling. and decide whether to use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

Incorrect Answers

A:

The choice “Inspect Port-channel config, member-port switchport output, show etherchannel detail and LACP status” concerns etherchannel trunk consistency; it does not resolve the stated requirement. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

B:

The choice “Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names” concerns stp root port path cost; it does not resolve the stated requirement. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

D:

The choice “Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches” concerns rapid pvst root bridge priority; it does not resolve the stated requirement. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Question 285

A change board considers the issue 'A switch port is unlabeled and the team needs to identify the directly connected Cisco router and its interface.'. Identify the TWO decisions that should be rejected. Select TWO answers.

  1. Collect targeted evidence to inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.
  2. Use ping to a remote network as proof of the directly connected switchport ID.
  3. Confirm the repair by checking that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.
  4. Assume CDP is supported and enabled on every non-Cisco vendor.
  5. Use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

Explanation

Correct Answer

B:

“Use ping to a remote network as proof of the directly connected switchport ID” would violate the requirement.

D:

“Assume CDP is supported and enabled on every non-Cisco vendor” would violate the requirement.

Incorrect Answers

A:

“Collect targeted evidence to inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.

C:

“Confirm the repair by checking that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling” adds a relevant safeguard or verification step rather than weakening the solution.

E:

“Use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery” is the controlled implementation, not an unsafe workaround. Confirm that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.

Question 286

A network operator receives this ticket: A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability. Which configuration is best suited to the reported issue?

  1. For this switching domain, assume CDP is supported and enabled on every non-Cisco vendor.
  2. For this switching domain, use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.
  3. For this switching domain, use ping to a remote network as proof of the directly connected switchport ID.
  4. For this switching domain, treat LLDP neighbor entries as a Layer 3 route table for all distant devices.

Explanation

Correct Answer

B:

The action 'For this switching domain, use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.' directly addresses the cdp and lldp neighbor discovery requirement in this situation: A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability. The relevant network mechanism is that cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop. A successful change should show that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling. To distinguish a genuine correction from a superficial change, inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.

Incorrect Answers

A:

A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability. “Assume CDP is supported and enabled on every non-Cisco vendor” would not meet the requirement. Instead, use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

C:

A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability. “Use ping to a remote network as proof of the directly connected switchport ID” does not implement the control that the facts call for. Instead, use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

D:

A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability. “Treat LLDP neighbor entries as a Layer 3 route table for all distant devices” does not implement the control that the facts call for. Instead, use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

Question 287

Which network-layer or protocol behavior most directly explains the result in this case: A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability.

  1. For this switching domain, etherChannel requires compatible physical-port characteristics; the logical Port-channel's Layer 2 parameters must agree across its members.
  2. For this switching domain, the root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.
  3. For this switching domain, cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.
  4. For this switching domain, non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.

Explanation

Correct Answer

C:

CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Incorrect Answers

A:

“EtherChannel requires compatible physical-port characteristics; the logical Port-channel's Layer 2 parameters must agree across its members” pertains to etherchannel trunk consistency, not the deciding condition here. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

B:

A mixed-vendor campus must. “The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC” pertains to rapid pvst root bridge priority, not the deciding condition here. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

D:

“Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge” pertains to stp root port path cost, not the deciding condition here. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Question 288

After correcting 'A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability.', which observation is the strongest evidence that the specific requirement is met?

  1. For this switching domain, show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.
  2. For this switching domain, neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.
  3. For this switching domain, show etherchannel summary shows all intended members bundled without suspension; show interfaces trunk reports the consistent Port-channel VLAN policy.
  4. For this switching domain, show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role.

Explanation

Correct Answer

B:

Because a network operator receives this ticket: A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability, cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Incorrect Answers

A:

“Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it” pertains to rapid pvst root bridge priority, not the deciding condition here. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

C:

“Show etherchannel summary shows all intended members bundled without suspension; show interfaces trunk reports the consistent Port-channel VLAN policy” pertains to etherchannel trunk consistency, not the deciding condition here. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

D:

“Show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role” pertains to stp root port path cost, not the deciding condition here. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Question 289

An operator is triaging the issue 'A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability.'. What should be inspected to isolate the actual cause?

  1. For this switching domain, inspect Port-channel config, member-port switchport output, show etherchannel detail and LACP status.
  2. For this switching domain, compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.
  3. For this switching domain, compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.
  4. For this switching domain, inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.

Explanation

Correct Answer

D:

Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Incorrect Answers

A:

“Inspect Port-channel config, member-port switchport output, show etherchannel detail and LACP status” pertains to etherchannel trunk consistency, not the deciding condition here. Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.

B:

“Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names” pertains to stp root port path cost, not the deciding condition here. Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.

C:

“Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches” pertains to rapid pvst root bridge priority, not the deciding condition here. Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.

Question 290

For this incident: A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this switching domain, confirm the repair by checking that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.
  2. For this switching domain, use ping to a remote network as proof of the directly connected switchport ID.
  3. For this switching domain, use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.
  4. For this switching domain, collect targeted evidence to inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.
  5. For this switching domain, assume CDP is supported and enabled on every non-Cisco vendor.

Explanation

Correct Answer

B:

“Use ping to a remote network as proof of the directly connected switchport ID” would violate the requirement. The appropriate control instead is to use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

E:

“Assume CDP is supported and enabled on every non-Cisco vendor” would violate the requirement. The appropriate control instead is to use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

Incorrect Answers

A:

“confirm the repair by checking that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

C:

“use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery” is the controlled implementation, not an unsafe workaround. Confirm that cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

D:

“collect targeted evidence to inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests