Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 27
Question 260
Network review: A meeting-room access port should come up quickly for an endpoint but must shut down if someone attaches an unauthorized switch. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
A meeting-room access port should come up quickly for an endpoint but must shut down if someone attaches an unauthorized switch. “Disable BPDU Guard despite an edge-switch attachment risk” would violate the requirement. PortFast lets an edge port enter forwarding without standard listening/learning delays; BPDU Guard errdisables the port upon receiving a BPDU.
A meeting-room access port should come up quickly for an endpoint but must shut down if someone attaches an unauthorized switch. “Enable PortFast blindly on a switch-to-switch trunk carrying loop-capable devices” would violate the requirement. PortFast lets an edge port enter forwarding without standard listening/learning delays; BPDU Guard errdisables the port upon receiving a BPDU.
Incorrect Answers
“confirm the repair by checking that a normal host port forwards promptly; a test BPDU triggers errdisable and syslog rather than permitting an unauthorized loop” adds a relevant safeguard or verification step rather than weakening the solution. PortFast lets an edge port enter forwarding without standard listening/learning delays; BPDU Guard errdisables the port upon receiving a BPDU.
A meeting-room access port should come up quickly for an endpoint but must shut down if someone attaches an unauthorized switch. “enable spanning-tree PortFast and BPDU Guard on verified end-host access ports” is the controlled implementation, not an unsafe workaround. PortFast lets an edge port enter forwarding without standard listening/learning delays; BPDU Guard errdisables the port upon receiving a BPDU.
“collect targeted evidence to inspect show spanning-tree interface detail, show interfaces status err-disabled and BPDU Guard logs” adds a relevant safeguard or verification step rather than weakening the solution. PortFast lets an edge port enter forwarding without standard listening/learning delays; BPDU Guard errdisables the port upon receiving a BPDU.
Question 261
Consider this operational failure: A switch must prevent an untrusted downstream wiring-closet switch from claiming a superior bridge priority. What should the administrator implement first?
Explanation
Correct Answer
The action 'Enable Root Guard on the designated-facing port toward the untrusted downstream switch.' directly addresses the stp root guard requirement in this situation: A switch must prevent an untrusted downstream wiring-closet switch from claiming a superior bridge priority. The relevant network mechanism is that root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally. A successful change should show that a deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease. To distinguish a genuine correction from a superficial change, inspect show spanning-tree inconsistentports, received BPDU priority and root ID history.
Incorrect Answers
“Disable STP globally so a tenant cannot send BPDUs” would not meet the requirement. Instead, enable Root Guard on the designated-facing port toward the untrusted downstream switch.
“Enable Root Guard on an intended root port and prevent legitimate upstream root selection” does not implement the control that the facts call for. Instead, enable Root Guard on the designated-facing port toward the untrusted downstream switch.
“Use BPDU filter to silently ignore all superior BPDUs on a shared switch uplink” would not meet the requirement. Instead, enable Root Guard on the designated-facing port toward the untrusted downstream switch.
Question 262
While troubleshooting 'A switch must prevent an untrusted downstream wiring-closet switch from claiming a superior bridge priority.', which underlying protocol rule should guide the decision?
Explanation
Correct Answer
Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally. A deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease.
Incorrect Answers
“CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop” would not meet the requirement. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
“A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping” would not be the most direct first check for this failure. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
The choice “Enterprise WLAN security uses per-user 802.1X/EAP authentication against an AAA server; PSK shares a common secret among clients” concerns wlan wpa2 enterprise 802; it does not resolve the stated requirement. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
Question 263
Which measurable result should be checked before closing this ticket: A switch must prevent an untrusted downstream wiring-closet switch from claiming a superior bridge priority.
Explanation
Correct Answer
The observation 'A deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease.' specifically demonstrates a successful outcome for stp root guard in this case: A switch must prevent an untrusted downstream wiring-closet switch from claiming a superior bridge priority. That observation tests the underlying mechanism that root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to enable Root Guard on the designated-facing port toward the untrusted downstream switch. If it fails, inspect show spanning-tree inconsistentports, received BPDU priority and root ID history. to isolate the remaining defect.
Incorrect Answers
The choice “The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy” concerns wlc ssid to vlan; it does not resolve the stated requirement. A deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease.
“Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling” alone does not establish all the required behavior. A deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease.
“A valid identity joins the SSID and obtains the authorized VLAN, while a revoked account fails with a traceable AAA result” pertains to wlan wpa2 enterprise 802, not the deciding condition here. A deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease.
Question 264
Before modifying more devices to address 'A switch must prevent an untrusted downstream wiring-closet switch from claiming a superior bridge priority.', which diagnostic evidence is most relevant?
Explanation
Correct Answer
The investigation 'Inspect show spanning-tree inconsistentports, received BPDU priority and root ID history.' examines the variables most likely to explain stp root guard in this situation: A switch must prevent an untrusted downstream wiring-closet switch from claiming a superior bridge priority. Those checks are directly tied to the behavior that root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally. The engineer can correlate this evidence with the expected outcome that a deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease. and decide whether to enable Root Guard on the designated-facing port toward the untrusted downstream switch.
Incorrect Answers
The choice “Inspect WLC AAA server reachability, RADIUS replies, EAP method, client association and policy VLAN” concerns wlan wpa2 enterprise 802; it does not resolve the stated requirement. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
The choice “Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk” concerns wlc ssid to vlan; it does not resolve the stated requirement. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
“Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints” would not be the most direct first check for this failure. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
Question 265
A change board considers the issue 'A switch must prevent an untrusted downstream wiring-closet switch from claiming a superior bridge priority.'. Identify the TWO decisions that should be rejected. Select TWO answers.
Explanation
Correct Answer
“Enable Root Guard on an intended root port and prevent legitimate upstream root selection” would violate the requirement. The appropriate control instead is to enable Root Guard on the designated-facing port toward the untrusted downstream switch.
“Disable STP globally so a tenant cannot send BPDUs” would violate the requirement.
Incorrect Answers
“Enable Root Guard on the designated-facing port toward the untrusted downstream switch” is the controlled implementation, not an unsafe workaround. Confirm that a deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease.
“Collect targeted evidence to inspect show spanning-tree inconsistentports, received BPDU priority and root ID history” adds a relevant safeguard or verification step rather than weakening the solution.
“Confirm the repair by checking that a deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease” adds a relevant safeguard or verification step rather than weakening the solution.
Question 266
A network operator receives this ticket: An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. Which configuration is best suited to the reported issue?
Explanation
Correct Answer
The action 'For this switching domain, enable Root Guard on the designated-facing port toward the untrusted downstream switch.' directly addresses the stp root guard requirement in this situation: An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. The relevant network mechanism is that root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally. A successful change should show that a deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease. To distinguish a genuine correction from a superficial change, inspect show spanning-tree inconsistentports, received BPDU priority and root ID history.
Incorrect Answers
An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. “Disable STP globally so a tenant cannot send BPDUs” would not meet the requirement. Instead, enable Root Guard on the designated-facing port toward the untrusted downstream switch.
An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. “Use BPDU filter to silently ignore all superior BPDUs on a shared switch uplink” would not meet the requirement. Instead, enable Root Guard on the designated-facing port toward the untrusted downstream switch.
An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. “Enable Root Guard on an intended root port and prevent legitimate upstream root selection” does not implement the control that the facts call for. Instead, enable Root Guard on the designated-facing port toward the untrusted downstream switch.
Question 267
Which network-layer or protocol behavior most directly explains the result in this case: An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge.
Explanation
Correct Answer
Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
Incorrect Answers
An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. “CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop” would not meet the requirement. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
“Enterprise WLAN security uses per-user 802.1X/EAP authentication against an AAA server; PSK shares a common secret among clients” pertains to wlan wpa2 enterprise 802, not the deciding condition here. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
“A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping” alone does not establish all the required behavior. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
Question 268
After correcting 'An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge.', which observation is the strongest evidence that the specific requirement is met?
Explanation
Correct Answer
A network operator receives this ticket: An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
Incorrect Answers
“A valid identity joins the SSID and obtains the authorized VLAN, while a revoked account fails with a traceable AAA result” pertains to wlan wpa2 enterprise 802, not the deciding condition here. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
“The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy” pertains to wlc ssid to vlan, not the deciding condition here. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
“Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling” alone does not establish all the required behavior. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
Question 269
An operator is triaging the issue 'An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge.'. What should be inspected to isolate the actual cause?
Explanation
Correct Answer
Inspect show spanning-tree inconsistentports, received BPDU priority and root ID history. Root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
Incorrect Answers
“Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints” would not be the most direct first check for this failure. Inspect show spanning-tree inconsistentports, received BPDU priority and root ID history.
The choice “inspect WLC AAA server reachability, RADIUS replies, EAP method, client association and policy VLAN” concerns wlan wpa2 enterprise 802; it does not resolve the stated requirement. Inspect show spanning-tree inconsistentports, received BPDU priority and root ID history.
The choice “inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk” concerns wlc ssid to vlan; it does not resolve the stated requirement. Inspect show spanning-tree inconsistentports, received BPDU priority and root ID history.
Question 270
For this incident: An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
“Disable STP globally so a tenant cannot send BPDUs” would violate the requirement. The appropriate control instead is to enable Root Guard on the designated-facing port toward the untrusted downstream switch.
An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. “Enable Root Guard on an intended root port and prevent legitimate upstream root selection” would violate the requirement. The appropriate control instead is to enable Root Guard on the designated-facing port toward the untrusted downstream switch.
Incorrect Answers
“enable Root Guard on the designated-facing port toward the untrusted downstream switch” is the controlled implementation, not an unsafe workaround. Confirm that root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
“confirm the repair by checking that a deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
“collect targeted evidence to inspect show spanning-tree inconsistentports, received BPDU priority and root ID history” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 25 - 10 Questions (Last Reviewed 24-Oct-2026)
- Cisco 200-301 Practice Test 26 - 10 Questions (Last Reviewed 23-Oct-2026)
- Cisco 200-301 Practice Test 27 - 10 Questions (Last Reviewed 22-Oct-2026)
- Cisco 200-301 Practice Test 28 - 10 Questions (Last Reviewed 21-Oct-2026)
- Cisco 200-301 Practice Test 29 - 10 Questions (Last Reviewed 20-Oct-2026)
