Cisco 200-301 Practice Test 30 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 30

Question 290

For this incident: A mixed-vendor campus must identify neighboring switches and validate cable documentation without relying on IP reachability. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this switching domain, confirm the repair by checking that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.
  2. For this switching domain, use ping to a remote network as proof of the directly connected switchport ID.
  3. For this switching domain, use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.
  4. For this switching domain, collect targeted evidence to inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.
  5. For this switching domain, assume CDP is supported and enabled on every non-Cisco vendor.

Explanation

Correct Answer

B:

“Use ping to a remote network as proof of the directly connected switchport ID” would violate the requirement. The appropriate control instead is to use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

E:

“Assume CDP is supported and enabled on every non-Cisco vendor” would violate the requirement. The appropriate control instead is to use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery.

Incorrect Answers

A:

“confirm the repair by checking that neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

C:

“use show cdp neighbors detail for Cisco discovery or show lldp neighbors detail for vendor-neutral Layer 2 discovery” is the controlled implementation, not an unsafe workaround. Confirm that cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

D:

“collect targeted evidence to inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Question 291

An engineer must resolve the following situation: Employees authenticate to a corporate SSID but obtain guest DHCP addresses after a WLAN change. Select the most appropriate solution.

  1. Change the AP radio channel to fix incorrect VLAN policy mapping.
  2. Map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.
  3. Broadcast the correct SSID while leaving the policy profile bound to the guest VLAN.
  4. Turn off controller client policy checks so all WLANs share one unrestricted network.

Explanation

Correct Answer

B:

The action 'Map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.' directly addresses the wlc ssid to vlan and policy requirement in this situation: Employees authenticate to a corporate SSID but obtain guest DHCP addresses after a WLAN change. The relevant network mechanism is that a WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. A successful change should show that the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy. To distinguish a genuine correction from a superficial change, inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk.

Incorrect Answers

A:

“Change the AP radio channel to fix incorrect VLAN policy mapping” does not implement the control that the facts call for. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. Instead, map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.

C:

“Broadcast the correct SSID while leaving the policy profile bound to the guest VLAN” does not implement the control that the facts call for. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. Instead, map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.

D:

“Turn off controller client policy checks so all WLANs share one unrestricted network” would not meet the requirement. This grants access or authority beyond the scope established in the case. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. Instead, map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.

Question 292

For the condition 'Employees authenticate to a corporate SSID but obtain guest DHCP addresses after a WLAN change.' which networking principle best explains the correct solution?

  1. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.
  2. Enterprise WLAN security uses per-user 802.1X/EAP authentication against an AAA server; PSK shares a common secret among clients.
  3. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.
  4. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.

Explanation

Correct Answer

C:

A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. Map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope. The decisive evidence is that the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

Incorrect Answers

A:

“Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop” pertains to stp loop guard, not the deciding condition here. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. The implementation must map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.

B:

“Enterprise WLAN security uses per-user 802.1X/EAP authentication against an AAA server; PSK shares a common secret among clients” pertains to wlan wpa2 enterprise 802, not the deciding condition here. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. The implementation must map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.

D:

“CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop” would not meet the requirement. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

Question 293

For this situation: Employees authenticate to a corporate SSID but obtain guest DHCP addresses after a WLAN change. Which test would prove the configuration is behaving as intended?

  1. Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.
  2. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.
  3. A valid identity joins the SSID and obtains the authorized VLAN, while a revoked account fails with a traceable AAA result.
  4. show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.

Explanation

Correct Answer

B:

Employees authenticate to a corporate SSID but obtain guest DHCP addresses after a WLAN change. Select the most appropriate solution. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

Incorrect Answers

A:

“Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling” alone does not establish all the required behavior. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

C:

The choice “A valid identity joins the SSID and obtains the authorized VLAN, while a revoked account fails with a traceable AAA result” concerns wlan wpa2 enterprise 802; it does not resolve the stated requirement. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

D:

The choice “show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes” concerns stp loop guard; it does not resolve the stated requirement. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

Question 294

Which inspection best distinguishes the problem mechanism in this incident: Employees authenticate to a corporate SSID but obtain guest DHCP addresses after a WLAN change.

  1. Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk.
  2. Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.
  3. Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.
  4. Inspect WLC AAA server reachability, RADIUS replies, EAP method, client association and policy VLAN.

Explanation

Correct Answer

A:

Because employees authenticate to a corporate SSID but obtain guest DHCP addresses after a WLAN change. Select the most appropriate solution, inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

Incorrect Answers

B:

“Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints” would not be the most direct first check for this failure. Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

C:

“Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters” pertains to stp loop guard, not the deciding condition here. Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

D:

The choice “Inspect WLC AAA server reachability, RADIUS replies, EAP method, client association and policy VLAN” concerns wlan wpa2 enterprise 802; it does not resolve the stated requirement. Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk.

Question 295

Two bad design choices are hidden in this change plan: Employees authenticate to a corporate SSID but obtain guest DHCP addresses after a WLAN change. Which TWO should not be approved? Select TWO answers.

  1. Broadcast the correct SSID while leaving the policy profile bound to the guest VLAN.
  2. Change the AP radio channel to fix incorrect VLAN policy mapping.
  3. Collect targeted evidence to inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk.
  4. Map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.
  5. Confirm the repair by checking that the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

Explanation

Correct Answer

A:

“Broadcast the correct SSID while leaving the policy profile bound to the guest VLAN” would violate the requirement. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

B:

“Change the AP radio channel to fix incorrect VLAN policy mapping” would violate the requirement. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

Incorrect Answers

C:

“Collect targeted evidence to inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk” adds a relevant safeguard or verification step rather than weakening the solution. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

D:

“Map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope” is the controlled implementation, not an unsafe workaround. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

E:

“Confirm the repair by checking that the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy” adds a relevant safeguard or verification step rather than weakening the solution. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. Confirm that the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

Question 296

On a Cisco-based network, A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. Which change most directly solves the stated requirement?

  1. For this switching domain, change the AP radio channel to fix incorrect VLAN policy mapping.
  2. For this switching domain, broadcast the correct SSID while leaving the policy profile bound to the guest VLAN.
  3. For this switching domain, map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.
  4. For this switching domain, turn off controller client policy checks so all WLANs share one unrestricted network.

Explanation

Correct Answer

C:

A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. Confirm that the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

Incorrect Answers

A:

On a Cisco-based network, A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “change the AP radio channel to fix incorrect VLAN policy mapping” does not implement the control that the facts call for. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. Instead, map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.

B:

On a Cisco-based network, A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “broadcast the correct SSID while leaving the policy profile bound to the guest VLAN” does not implement the control that the facts call for. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. Instead, map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.

D:

On a Cisco-based network, A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “turn off controller client policy checks so all WLANs share one unrestricted network” would not meet the requirement. This grants access or authority beyond the scope established in the case. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. Instead, map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.

Question 297

A team is reviewing the design for this case: A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. What technical behavior is decisive?

  1. For this switching domain, cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.
  2. For this switching domain, a WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.
  3. For this switching domain, enterprise WLAN security uses per-user 802.1X/EAP authentication against an AAA server; PSK shares a common secret among clients.
  4. For this switching domain, loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Explanation

Correct Answer

B:

A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. Map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.

Incorrect Answers

A:

A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop” would not meet the requirement. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

C:

The choice “enterprise WLAN security uses per-user 802.1X/EAP authentication against an AAA server; PSK shares a common secret among clients” concerns wlan wpa2 enterprise 802; it does not resolve the stated requirement. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

D:

The choice “loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop” concerns stp loop guard; it does not resolve the stated requirement. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

Question 298

An engineer implements a fix for 'A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN.'. Which result would conclusively validate the intended change?

  1. For this switching domain, the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.
  2. For this switching domain, neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.
  3. For this switching domain, show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.
  4. For this switching domain, a valid identity joins the SSID and obtains the authorized VLAN, while a revoked account fails with a traceable AAA result.

Explanation

Correct Answer

A:

Because on a Cisco-based network, A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. Which change most directly solves the stated requirement, a WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

Incorrect Answers

B:

An engineer implements a fix for 'A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling” alone does not establish all the required behavior. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

C:

“Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes” pertains to stp loop guard, not the deciding condition here. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

D:

“A valid identity joins the SSID and obtains the authorized VLAN, while a revoked account fails with a traceable AAA result” pertains to wlan wpa2 enterprise 802, not the deciding condition here. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

Question 299

For the case 'A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN.', which targeted checks should be compared before a disruptive change?

  1. For this switching domain, inspect WLC AAA server reachability, RADIUS replies, EAP method, client association and policy VLAN.
  2. For this switching domain, inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.
  3. For this switching domain, inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk.
  4. For this switching domain, inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.

Explanation

Correct Answer

C:

Because on a Cisco-based network, A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. Which change most directly solves the stated requirement, inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

Incorrect Answers

A:

“Inspect WLC AAA server reachability, RADIUS replies, EAP method, client association and policy VLAN” pertains to wlan wpa2 enterprise 802, not the deciding condition here. Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

B:

For the case 'A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters” pertains to stp loop guard, not the deciding condition here. Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

D:

For the case 'A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints” would not be the most direct first check for this failure. Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

Question 300

Network review: A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this switching domain, collect targeted evidence to inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk.
  2. For this switching domain, broadcast the correct SSID while leaving the policy profile bound to the guest VLAN.
  3. For this switching domain, map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope.
  4. For this switching domain, change the AP radio channel to fix incorrect VLAN policy mapping.
  5. For this switching domain, confirm the repair by checking that the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.

Explanation

Correct Answer

B:

A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “Broadcast the correct SSID while leaving the policy profile bound to the guest VLAN” would violate the requirement. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

D:

A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “Change the AP radio channel to fix incorrect VLAN policy mapping” would violate the requirement. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

Incorrect Answers

A:

A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “collect targeted evidence to inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk” adds a relevant safeguard or verification step rather than weakening the solution. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

C:

A new wireless SSID is advertised correctly but its controller policy profile maps users to the wrong VLAN. “map the WLAN to the intended controller policy profile and client VLAN or interface and verify DHCP scope” is the controlled implementation, not an unsafe workaround. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

E:

“confirm the repair by checking that the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy” adds a relevant safeguard or verification step rather than weakening the solution. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests