Cisco 200-301 Practice Test 28 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 28

Question 270

For this incident: An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this switching domain, enable Root Guard on the designated-facing port toward the untrusted downstream switch.
  2. For this switching domain, disable STP globally so a tenant cannot send BPDUs.
  3. For this switching domain, confirm the repair by checking that a deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease.
  4. For this switching domain, enable Root Guard on an intended root port and prevent legitimate upstream root selection.
  5. For this switching domain, collect targeted evidence to inspect show spanning-tree inconsistentports, received BPDU priority and root ID history.

Explanation

Correct Answer

B:

“Disable STP globally so a tenant cannot send BPDUs” would violate the requirement. The appropriate control instead is to enable Root Guard on the designated-facing port toward the untrusted downstream switch.

D:

An aggregation port toward a tenant switch should remain designated and must not permit that tenant to become the root bridge. “Enable Root Guard on an intended root port and prevent legitimate upstream root selection” would violate the requirement. The appropriate control instead is to enable Root Guard on the designated-facing port toward the untrusted downstream switch.

Incorrect Answers

A:

“enable Root Guard on the designated-facing port toward the untrusted downstream switch” is the controlled implementation, not an unsafe workaround. Confirm that root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.

C:

“confirm the repair by checking that a deliberately superior downstream BPDU causes root-inconsistent state, and port forwarding recovers when superior BPDUs cease” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.

E:

“collect targeted evidence to inspect show spanning-tree inconsistentports, received BPDU priority and root ID history” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that root Guard places a designated port in root-inconsistent when superior BPDUs arrive, preventing root role takeover without disabling STP globally.

Question 271

An engineer must resolve the following situation: An alternate uplink stops receiving BPDUs because of a one-way fiber problem, risking a loop if it transitions to designated. Select the most appropriate solution.

  1. Assume absence of BPDUs proves the topology has become loop free.
  2. Disable loop protection because physical link state remains up.
  3. Enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.
  4. Enable PortFast on the redundant switch-to-switch path to bypass BPDUs.

Explanation

Correct Answer

C:

The action 'Enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.' directly addresses the stp loop guard requirement in this situation: An alternate uplink stops receiving BPDUs because of a one-way fiber problem, risking a loop if it transitions to designated. The relevant network mechanism is that loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. A successful change should show that show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes. To distinguish a genuine correction from a superficial change, inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.

Incorrect Answers

A:

“Assume absence of BPDUs proves the topology has become loop free” would not meet the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Instead, enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

B:

“Disable loop protection because physical link state remains up” would not meet the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Instead, enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

D:

“Enable PortFast on the redundant switch-to-switch path to bypass BPDUs” would not meet the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Instead, enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

Question 272

For the condition 'An alternate uplink stops receiving BPDUs because of a one-way fiber problem, risking a loop if it transitions to designated.' which networking principle best explains the correct solution?

  1. 802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it.
  2. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.
  3. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.
  4. Router-on-a-stick uses one physical router link with 802.1Q subinterfaces, each acting as a Layer 3 gateway for a VLAN.

Explanation

Correct Answer

B:

Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.

Incorrect Answers

A:

“802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it” does not fully explain the decisive technical boundary in this case. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

C:

The choice “On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage” concerns native vlan mismatch; it does not resolve the stated requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

D:

The choice “Router-on-a-stick uses one physical router link with 802.1Q subinterfaces, each acting as a Layer 3 gateway for a VLAN” concerns inter-vlan router-on-a-stick; it does not resolve the stated requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Question 273

For this situation: An alternate uplink stops receiving BPDUs because of a one-way fiber problem, risking a loop if it transitions to designated. Which test would prove the configuration is behaving as intended?

  1. show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.
  2. show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames.
  3. Both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.
  4. The switch uplink is a trunk, each router subinterface is up with matching encapsulation and hosts route between subnets.

Explanation

Correct Answer

A:

Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes. If this test fails, inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.

Incorrect Answers

B:

Because an alternate uplink stops receiving BPDUs because of a one-way fiber problem, risking a loop if it transitions to designated. Select the most appropriate solution, “show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames” alone does not establish all the required behavior. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

C:

“Both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN” pertains to native vlan mismatch, not the deciding condition here. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

D:

“The switch uplink is a trunk, each router subinterface is up with matching encapsulation and hosts route between subnets” pertains to inter-vlan router-on-a-stick, not the deciding condition here. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Question 274

Which inspection best distinguishes the problem mechanism in this incident: An alternate uplink stops receiving BPDUs because of a one-way fiber problem, risking a loop if it transitions to designated.

  1. Inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state.
  2. Inspect show interfaces trunk, show ip interface brief and show running-config interface on the router subinterfaces.
  3. Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.
  4. Compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.

Explanation

Correct Answer

C:

The investigation 'Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.' examines the variables most likely to explain stp loop guard in this situation: An alternate uplink stops receiving BPDUs because of a one-way fiber problem, risking a loop if it transitions to designated. Those checks are directly tied to the behavior that loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. The engineer can correlate this evidence with the expected outcome that show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes. and decide whether to enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

Incorrect Answers

A:

“Inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state” would not be the most direct first check for this failure. Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

B:

“Inspect show interfaces trunk, show ip interface brief and show running-config interface on the router subinterfaces” pertains to inter-vlan router-on-a-stick, not the deciding condition here. Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

D:

The choice “Compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings” concerns native vlan mismatch; it does not resolve the stated requirement. Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.

Question 275

Two bad design choices are hidden in this change plan: An alternate uplink stops receiving BPDUs because of a one-way fiber problem, risking a loop if it transitions to designated. Which TWO should not be approved? Select TWO answers.

  1. Confirm the repair by checking that show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.
  2. Disable loop protection because physical link state remains up.
  3. Collect targeted evidence to inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.
  4. Enable PortFast on the redundant switch-to-switch path to bypass BPDUs.
  5. Enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

Explanation

Correct Answer

B:

“Disable loop protection because physical link state remains up” would violate the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

D:

“Enable PortFast on the redundant switch-to-switch path to bypass BPDUs” would violate the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Incorrect Answers

A:

“Confirm the repair by checking that show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes” adds a relevant safeguard or verification step rather than weakening the solution. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

C:

“Collect targeted evidence to inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters” adds a relevant safeguard or verification step rather than weakening the solution. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Confirm that show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.

E:

“Enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear” is the controlled implementation, not an unsafe workaround. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Question 276

On a Cisco-based network, A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. Which change most directly solves the stated requirement?

  1. For this switching domain, enable PortFast on the redundant switch-to-switch path to bypass BPDUs.
  2. For this switching domain, disable loop protection because physical link state remains up.
  3. For this switching domain, assume absence of BPDUs proves the topology has become loop free.
  4. For this switching domain, enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

Explanation

Correct Answer

D:

The action 'For this switching domain, enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.' directly addresses the stp loop guard requirement in this situation: A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. The relevant network mechanism is that loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. A successful change should show that show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes. To distinguish a genuine correction from a superficial change, inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.

Incorrect Answers

A:

On a Cisco-based network, A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “Enable PortFast on the redundant switch-to-switch path to bypass BPDUs” would not meet the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Instead, enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

B:

On a Cisco-based network, A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “Disable loop protection because physical link state remains up” would not meet the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Instead, enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

C:

On a Cisco-based network, A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “Assume absence of BPDUs proves the topology has become loop free” would not meet the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Instead, enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

Question 277

A team is reviewing the design for this case: A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. What technical behavior is decisive?

  1. For this switching domain, router-on-a-stick uses one physical router link with 802.1Q subinterfaces, each acting as a Layer 3 gateway for a VLAN.
  2. For this switching domain, 802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it.
  3. For this switching domain, on an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.
  4. For this switching domain, loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Explanation

Correct Answer

D:

On a Cisco-based network, A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. Which change most directly solves the stated requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.

Incorrect Answers

A:

“Router-on-a-stick uses one physical router link with 802.1Q subinterfaces, each acting as a Layer 3 gateway for a VLAN” pertains to inter-vlan router-on-a-stick, not the deciding condition here. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. The implementation must enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

B:

“802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it” does not fully explain the decisive technical boundary in this case. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. The implementation must enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

C:

“On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage” pertains to native vlan mismatch, not the deciding condition here. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. The implementation must enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

Question 278

An engineer implements a fix for 'A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up.'. Which result would conclusively validate the intended change?

  1. For this switching domain, the switch uplink is a trunk, each router subinterface is up with matching encapsulation and hosts route between subnets.
  2. For this switching domain, show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames.
  3. For this switching domain, both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.
  4. For this switching domain, show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.

Explanation

Correct Answer

D:

Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.

Incorrect Answers

A:

An engineer implements a fix for 'A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “The switch uplink is a trunk, each router subinterface is up with matching encapsulation and hosts route between subnets” pertains to inter-vlan router-on-a-stick, not the deciding condition here. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

B:

Because on a Cisco-based network, A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. Which change most directly solves the stated requirement, “show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames” alone does not establish all the required behavior. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

C:

An engineer implements a fix for 'A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “Both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN” pertains to native vlan mismatch, not the deciding condition here. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Question 279

For the case 'A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up.', which targeted checks should be compared before a disruptive change?

  1. For this switching domain, inspect show interfaces trunk, show ip interface brief and show running-config interface on the router subinterfaces.
  2. For this switching domain, inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.
  3. For this switching domain, compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.
  4. For this switching domain, inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state.

Explanation

Correct Answer

B:

Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop. Show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.

Incorrect Answers

A:

The choice “inspect show interfaces trunk, show ip interface brief and show running-config interface on the router subinterfaces” concerns inter-vlan router-on-a-stick; it does not resolve the stated requirement. Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.

C:

For the case 'A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. The choice “compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings” concerns native vlan mismatch; it does not resolve the stated requirement. Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.

D:

“Inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state” would not be the most direct first check for this failure. Inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.

Question 280

Network review: A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this switching domain, disable loop protection because physical link state remains up.
  2. For this switching domain, confirm the repair by checking that show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes.
  3. For this switching domain, collect targeted evidence to inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters.
  4. For this switching domain, enable PortFast on the redundant switch-to-switch path to bypass BPDUs.
  5. For this switching domain, enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear.

Explanation

Correct Answer

A:

A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “Disable loop protection because physical link state remains up” would violate the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

D:

A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “Enable PortFast on the redundant switch-to-switch path to bypass BPDUs” would violate the requirement. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Incorrect Answers

B:

A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “confirm the repair by checking that show spanning-tree inconsistentports reports loop-inconsistent on BPDU loss and restores the expected role after BPDU reception resumes” adds a relevant safeguard or verification step rather than weakening the solution. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

C:

“collect targeted evidence to inspect show spanning-tree detail, fiber directional errors, unidirectional link detection and BPDU counters” adds a relevant safeguard or verification step rather than weakening the solution. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

E:

A redundant path becomes unidirectional and stops hearing expected BPDUs while still showing link up. “enable Loop Guard on appropriate non-designated STP ports to block forwarding when expected BPDUs disappear” is the controlled implementation, not an unsafe workaround. Loop Guard holds a root or alternate port in loop-inconsistent rather than allowing a silent BPDU loss to promote it into a forwarding loop.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests