Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 25
Question 240
Network review: A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “Increase root-bridge priority above all access-switch priorities and expect it to win” would violate the requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.
A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “Use only the highest IP address to decide STP root election” would violate the requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.
Incorrect Answers
“set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election” is the controlled implementation, not an unsafe workaround. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.
“confirm the repair by checking that show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it” adds a relevant safeguard or verification step rather than weakening the solution. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.
A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “collect targeted evidence to compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches” adds a relevant safeguard or verification step rather than weakening the solution. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.
Question 241
Consider this operational failure: Two redundant uplinks connect an access switch to the root via different speeds and the wrong link is active. What should the administrator implement first?
Explanation
Correct Answer
The action 'Choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.' directly addresses the stp root port path cost requirement in this situation: Two redundant uplinks connect an access switch to the root via different speeds and the wrong link is active. The relevant network mechanism is that non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge. A successful change should show that show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role. To distinguish a genuine correction from a superficial change, compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.
Incorrect Answers
“Choose root path solely from router OSPF cost without examining STP BPDUs” does not implement the control that the facts call for. Instead, choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.
“Force the less-preferred path into forwarding by disabling all loop protection” does not implement the control that the facts call for. Instead, choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.
“Assume the numerically largest interface ID is always the root port” would not meet the requirement. Instead, choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.
Question 242
While troubleshooting 'Two redundant uplinks connect an access switch to the root via different speeds and the wrong link is active.', which underlying protocol rule should guide the decision?
Explanation
Correct Answer
Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge. Show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role.
Incorrect Answers
“Router-on-a-stick uses one physical router link with 802.1Q subinterfaces, each acting as a Layer 3 gateway for a VLAN” pertains to inter-vlan router-on-a-stick, not the deciding condition here. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
The choice “On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage” concerns native vlan mismatch; it does not resolve the stated requirement. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
“802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it” would not be the most direct first check for this failure. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
Question 243
Which measurable result should be checked before closing this ticket: Two redundant uplinks connect an access switch to the root via different speeds and the wrong link is active.
Explanation
Correct Answer
Show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role. Choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.
Incorrect Answers
“Show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames” alone does not establish all the required behavior. Show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role.
“The switch uplink is a trunk, each router subinterface is up with matching encapsulation and hosts route between subnets” pertains to inter-vlan router-on-a-stick, not the deciding condition here. Show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role.
“Both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN” pertains to native vlan mismatch, not the deciding condition here. Show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role.
Question 244
Before modifying more devices to address 'Two redundant uplinks connect an access switch to the root via different speeds and the wrong link is active.', which diagnostic evidence is most relevant?
Explanation
Correct Answer
The investigation 'Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.' examines the variables most likely to explain stp root port path cost in this situation: Two redundant uplinks connect an access switch to the root via different speeds and the wrong link is active. Those checks are directly tied to the behavior that non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge. The engineer can correlate this evidence with the expected outcome that show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role. and decide whether to choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.
Incorrect Answers
“Inspect show interfaces trunk, show ip interface brief and show running-config interface on the router subinterfaces” pertains to inter-vlan router-on-a-stick, not the deciding condition here. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
The choice “Compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings” concerns native vlan mismatch; it does not resolve the stated requirement. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
“Inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state” would not be the most direct first check for this failure. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
Question 245
A change board considers the issue 'Two redundant uplinks connect an access switch to the root via different speeds and the wrong link is active.'. Identify the TWO decisions that should be rejected. Select TWO answers.
Explanation
Correct Answer
“Force the less-preferred path into forwarding by disabling all loop protection” would violate the requirement.
“Assume the numerically largest interface ID is always the root port” would violate the requirement. The appropriate control instead is to choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.
Incorrect Answers
“Confirm the repair by checking that show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role” adds a relevant safeguard or verification step rather than weakening the solution.
“Choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties” is the controlled implementation, not an unsafe workaround. Confirm that show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role.
“Collect targeted evidence to compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role.
Question 246
A network operator receives this ticket: A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port. Which configuration is best suited to the reported issue?
Explanation
Correct Answer
The action 'For this switching domain, choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.' directly addresses the stp root port path cost requirement in this situation: A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port. The relevant network mechanism is that non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge. A successful change should show that show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role. To distinguish a genuine correction from a superficial change, compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.
Incorrect Answers
A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port. “Choose root path solely from router OSPF cost without examining STP BPDUs” does not implement the control that the facts call for. Instead, choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.
A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port. “Force the less-preferred path into forwarding by disabling all loop protection” does not implement the control that the facts call for. Instead, choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.
A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port. “Assume the numerically largest interface ID is always the root port” would not meet the requirement. Instead, choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties.
Question 247
Which network-layer or protocol behavior most directly explains the result in this case: A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port.
Explanation
Correct Answer
Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge. If this test fails, compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.
Incorrect Answers
“802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it” alone does not establish all the required behavior. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port. The choice “on an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage” concerns native vlan mismatch; it does not resolve the stated requirement. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
The choice “router-on-a-stick uses one physical router link with 802.1Q subinterfaces, each acting as a Layer 3 gateway for a VLAN” concerns inter-vlan router-on-a-stick; it does not resolve the stated requirement. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
Question 248
After correcting 'A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port.', which observation is the strongest evidence that the specific requirement is met?
Explanation
Correct Answer
Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
Incorrect Answers
“Show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames” alone does not establish all the required behavior. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
The choice “both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN” concerns native vlan mismatch; it does not resolve the stated requirement. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
The choice “the switch uplink is a trunk, each router subinterface is up with matching encapsulation and hosts route between subnets” concerns inter-vlan router-on-a-stick; it does not resolve the stated requirement. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
Question 249
An operator is triaging the issue 'A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port.'. What should be inspected to isolate the actual cause?
Explanation
Correct Answer
Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names. Non-root switches select their root port based on the best received BPDU and lowest cumulative path cost to the root bridge.
Incorrect Answers
The choice “inspect show interfaces trunk, show ip interface brief and show running-config interface on the router subinterfaces” concerns inter-vlan router-on-a-stick; it does not resolve the stated requirement. Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.
“Inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state” would not be the most direct first check for this failure. Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.
The choice “compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings” concerns native vlan mismatch; it does not resolve the stated requirement. Compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names.
Question 250
For this incident: A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
“Assume the numerically largest interface ID is always the root port” would violate the requirement.
A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port. “Force the less-preferred path into forwarding by disabling all loop protection” would violate the requirement.
Incorrect Answers
A switch has parallel candidate paths to the root, and engineers need to predict which port becomes the root port. “confirm the repair by checking that show spanning-tree shows the intended root port forwarding and redundant alternatives in an appropriate discarding role” adds a relevant safeguard or verification step rather than weakening the solution.
“choose and verify the path with the lowest total STP root-path cost, using port ID to break remaining ties” is the controlled implementation, not an unsafe workaround.
“collect targeted evidence to compare root-path cost and received BPDU priorities per candidate interface, rather than only local interface names” adds a relevant safeguard or verification step rather than weakening the solution.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 23 - 10 Questions (Last Reviewed 26-Oct-2026)
- Cisco 200-301 Practice Test 24 - 10 Questions (Last Reviewed 25-Oct-2026)
- Cisco 200-301 Practice Test 25 - 10 Questions (Last Reviewed 24-Oct-2026)
- Cisco 200-301 Practice Test 26 - 10 Questions (Last Reviewed 23-Oct-2026)
- Cisco 200-301 Practice Test 27 - 10 Questions (Last Reviewed 22-Oct-2026)
