Cisco 200-301 Practice Test 19 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 19

Question 180

Network review: A newly attached access switch sends VLAN 30 traffic to distribution, but the upstream trunk permits 10 and 20 only. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this switching domain, configure compatible 802.1Q trunking and explicitly allow the required VLAN across both ends.
  2. For this switching domain, collect targeted evidence to inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state.
  3. For this switching domain, force every access port to the native VLAN to bypass tagged forwarding.
  4. For this switching domain, confirm the repair by checking that show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames.
  5. For this switching domain, change the client IP mask instead of admitting the missing trunk VLAN.

Explanation

Correct Answer

C:

“Force every access port to the native VLAN to bypass tagged forwarding” would violate the requirement. 802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it.

E:

“Change the client IP mask instead of admitting the missing trunk VLAN” would violate the requirement. 802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it.

Incorrect Answers

A:

“configure compatible 802.1Q trunking and explicitly allow the required VLAN across both ends” is the controlled implementation, not an unsafe workaround. 802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it. Confirm that show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames.

B:

“collect targeted evidence to inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state” adds a relevant safeguard or verification step rather than weakening the solution. 802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it. Confirm that show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames.

D:

“confirm the repair by checking that show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames” adds a relevant safeguard or verification step rather than weakening the solution. 802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it. Confirm that show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames.

Question 181

Consider this operational failure: The distribution trunk uses native VLAN 99 while its access-switch peer uses native VLAN 1 and CDP logs mismatch warnings. What should the administrator implement first?

  1. Treat native VLAN mismatch as an IP route metric problem.
  2. Assume untagged frames have no VLAN membership on a trunk.
  3. Change only the allowed VLAN list while leaving native VLAN settings different.
  4. Set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

Explanation

Correct Answer

D:

The action 'Set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.' directly addresses the native vlan mismatch requirement in this situation: The distribution trunk uses native VLAN 99 while its access-switch peer uses native VLAN 1 and CDP logs mismatch warnings. The relevant network mechanism is that on an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage. A successful change should show that both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN. To distinguish a genuine correction from a superficial change, compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.

Incorrect Answers

A:

“Treat native VLAN mismatch as an IP route metric problem” does not implement the control that the facts call for. Instead, set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

B:

“Assume untagged frames have no VLAN membership on a trunk” would not meet the requirement. Instead, set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

C:

“Change only the allowed VLAN list while leaving native VLAN settings different” does not implement the control that the facts call for. Instead, set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

Question 182

While troubleshooting 'The distribution trunk uses native VLAN 99 while its access-switch peer uses native VLAN 1 and CDP logs mismatch warnings.', which underlying protocol rule should guide the decision?

  1. 802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it.
  2. An SVI terminates a VLAN at Layer 3; inter-VLAN packet forwarding requires the switch's routing function and active underlying VLAN.
  3. Router-on-a-stick uses one physical router link with 802.1Q subinterfaces, each acting as a Layer 3 gateway for a VLAN.
  4. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

Explanation

Correct Answer

D:

On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage. Both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.

Incorrect Answers

A:

“802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it” would not be the most direct first check for this failure. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

B:

The choice “An SVI terminates a VLAN at Layer 3; inter-VLAN packet forwarding requires the switch's routing function and active underlying VLAN” concerns layer 3 svi routing; it does not resolve the stated requirement. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

C:

The choice “Router-on-a-stick uses one physical router link with 802.1Q subinterfaces, each acting as a Layer 3 gateway for a VLAN” concerns inter-vlan router-on-a-stick; it does not resolve the stated requirement. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

Question 183

Which measurable result should be checked before closing this ticket: The distribution trunk uses native VLAN 99 while its access-switch peer uses native VLAN 1 and CDP logs mismatch warnings.

  1. show ip route lists both connected SVI networks and hosts successfully reach the opposite VLAN via their gateway.
  2. The switch uplink is a trunk, each router subinterface is up with matching encapsulation and hosts route between subnets.
  3. Both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.
  4. show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames.

Explanation

Correct Answer

C:

Both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.

Incorrect Answers

A:

“Show ip route lists both connected SVI networks and hosts successfully reach the opposite VLAN via their gateway” pertains to layer 3 svi routing, not the deciding condition here. Both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.

B:

“The switch uplink is a trunk, each router subinterface is up with matching encapsulation and hosts route between subnets” pertains to inter-vlan router-on-a-stick, not the deciding condition here. Both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.

D:

“Show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames” alone does not establish all the required behavior. Both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.

Question 184

Before modifying more devices to address 'The distribution trunk uses native VLAN 99 while its access-switch peer uses native VLAN 1 and CDP logs mismatch warnings.', which diagnostic evidence is most relevant?

  1. Compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.
  2. Inspect show interfaces trunk, show ip interface brief and show running-config interface on the router subinterfaces.
  3. Inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state.
  4. Inspect show ip interface brief, show vlan brief, ip routing setting and ACLs on both SVIs.

Explanation

Correct Answer

A:

The investigation 'Compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.' examines the variables most likely to explain native vlan mismatch in this situation: The distribution trunk uses native VLAN 99 while its access-switch peer uses native VLAN 1 and CDP logs mismatch warnings. Those checks are directly tied to the behavior that on an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage. The engineer can correlate this evidence with the expected outcome that both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN. and decide whether to set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

Incorrect Answers

B:

The choice “Inspect show interfaces trunk, show ip interface brief and show running-config interface on the router subinterfaces” concerns inter-vlan router-on-a-stick; it does not resolve the stated requirement. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

C:

“Inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state” would not be the most direct first check for this failure. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

D:

The choice “Inspect show ip interface brief, show vlan brief, ip routing setting and ACLs on both SVIs” concerns layer 3 svi routing; it does not resolve the stated requirement. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

Question 185

A change board considers the issue 'The distribution trunk uses native VLAN 99 while its access-switch peer uses native VLAN 1 and CDP logs mismatch warnings.'. Identify the TWO decisions that should be rejected. Select TWO answers.

  1. Confirm the repair by checking that both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.
  2. Treat native VLAN mismatch as an IP route metric problem.
  3. Set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.
  4. Change only the allowed VLAN list while leaving native VLAN settings different.
  5. Collect targeted evidence to compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.

Explanation

Correct Answer

B:

“Treat native VLAN mismatch as an IP route metric problem” would violate the requirement.

D:

“Change only the allowed VLAN list while leaving native VLAN settings different” would violate the requirement.

Incorrect Answers

A:

“Confirm the repair by checking that both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.

C:

“Set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible” is the controlled implementation, not an unsafe workaround.

E:

“Collect targeted evidence to compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.

Question 186

A network operator receives this ticket: A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk. Which configuration is best suited to the reported issue?

  1. For this switching domain, change only the allowed VLAN list while leaving native VLAN settings different.
  2. For this switching domain, assume untagged frames have no VLAN membership on a trunk.
  3. For this switching domain, set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.
  4. For this switching domain, treat native VLAN mismatch as an IP route metric problem.

Explanation

Correct Answer

C:

The action 'For this switching domain, set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.' directly addresses the native vlan mismatch requirement in this situation: A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk. The relevant network mechanism is that on an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage. A successful change should show that both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN. To distinguish a genuine correction from a superficial change, compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.

Incorrect Answers

A:

A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk. “Change only the allowed VLAN list while leaving native VLAN settings different” does not implement the control that the facts call for. Instead, set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

B:

A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk. “Assume untagged frames have no VLAN membership on a trunk” would not meet the requirement. Instead, set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

D:

A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk. “Treat native VLAN mismatch as an IP route metric problem” does not implement the control that the facts call for. Instead, set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

Question 187

Which network-layer or protocol behavior most directly explains the result in this case: A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk.

  1. For this switching domain, an SVI terminates a VLAN at Layer 3; inter-VLAN packet forwarding requires the switch's routing function and active underlying VLAN.
  2. For this switching domain, 802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it.
  3. For this switching domain, on an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.
  4. For this switching domain, router-on-a-stick uses one physical router link with 802.1Q subinterfaces, each acting as a Layer 3 gateway for a VLAN.

Explanation

Correct Answer

C:

On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

Incorrect Answers

A:

A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk. The choice “an SVI terminates a VLAN at Layer 3; inter-VLAN packet forwarding requires the switch's routing function and active underlying VLAN” concerns layer 3 svi routing; it does not resolve the stated requirement. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

B:

“802.1Q tags distinguish VLAN traffic over one physical trunk; the allowed VLAN list filters which tagged VLANs traverse it” alone does not establish all the required behavior. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

D:

A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk. The choice “router-on-a-stick uses one physical router link with 802.1Q subinterfaces, each acting as a Layer 3 gateway for a VLAN” concerns inter-vlan router-on-a-stick; it does not resolve the stated requirement. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

Question 188

After correcting 'A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk.', which observation is the strongest evidence that the specific requirement is met?

  1. For this switching domain, show ip route lists both connected SVI networks and hosts successfully reach the opposite VLAN via their gateway.
  2. For this switching domain, the switch uplink is a trunk, each router subinterface is up with matching encapsulation and hosts route between subnets.
  3. For this switching domain, show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames.
  4. For this switching domain, both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.

Explanation

Correct Answer

D:

On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage. If this test fails, compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.

Incorrect Answers

A:

The choice “show ip route lists both connected SVI networks and hosts successfully reach the opposite VLAN via their gateway” concerns layer 3 svi routing; it does not resolve the stated requirement. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

B:

The choice “the switch uplink is a trunk, each router subinterface is up with matching encapsulation and hosts route between subnets” concerns inter-vlan router-on-a-stick; it does not resolve the stated requirement. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

C:

“Show interfaces trunk lists the required VLAN as allowed and forwarding; same-VLAN hosts on opposite switches exchange frames” alone does not establish all the required behavior. On an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

Question 189

An operator is triaging the issue 'A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk.'. What should be inspected to isolate the actual cause?

  1. For this switching domain, compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.
  2. For this switching domain, inspect show ip interface brief, show vlan brief, ip routing setting and ACLs on both SVIs.
  3. For this switching domain, inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state.
  4. For this switching domain, inspect show interfaces trunk, show ip interface brief and show running-config interface on the router subinterfaces.

Explanation

Correct Answer

A:

The investigation 'For this switching domain, compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.' examines the variables most likely to explain native vlan mismatch in this situation: A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk. Those checks are directly tied to the behavior that on an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage. The engineer can correlate this evidence with the expected outcome that both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN. and decide whether to set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

Incorrect Answers

B:

The choice “inspect show ip interface brief, show vlan brief, ip routing setting and ACLs on both SVIs” concerns layer 3 svi routing; it does not resolve the stated requirement. Compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.

C:

“Inspect show interfaces trunk, allowed VLAN lists, operational mode, VLAN existence and STP forwarding state” would not be the most direct first check for this failure. Compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.

D:

The choice “inspect show interfaces trunk, show ip interface brief and show running-config interface on the router subinterfaces” concerns inter-vlan router-on-a-stick; it does not resolve the stated requirement. Compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.

Question 190

For this incident: A branch has untagged management frames classified into different VLANs on opposite ends of an 802.1Q trunk. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this switching domain, set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.
  2. For this switching domain, change only the allowed VLAN list while leaving native VLAN settings different.
  3. For this switching domain, collect targeted evidence to compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings.
  4. For this switching domain, confirm the repair by checking that both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN.
  5. For this switching domain, treat native VLAN mismatch as an IP route metric problem.

Explanation

Correct Answer

B:

“Change only the allowed VLAN list while leaving native VLAN settings different” would violate the requirement. The appropriate control instead is to set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

E:

“Treat native VLAN mismatch as an IP route metric problem” would violate the requirement. The appropriate control instead is to set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible.

Incorrect Answers

A:

“set an identical designated native VLAN on both trunk ends and keep user traffic explicitly tagged where possible” is the controlled implementation, not an unsafe workaround. Confirm that on an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

C:

“collect targeted evidence to compare show interfaces switchport and show interfaces trunk on both peers and CDP native-VLAN warnings” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that on an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

D:

“confirm the repair by checking that both ends report matching native VLAN settings and no mismatch warning, and untagged test traffic remains in the intended VLAN” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that on an 802.1Q trunk, normally untagged frames map to the configured native VLAN; a mismatch can misclassify traffic or create leakage.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests