Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 62
Question 610
For this incident: A management ACL should allow 10.18.50.128/26 but deny other hosts in the parent /24. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
“For this protected network, use subnet mask 255.255.255.224 as an IOS ACL wildcard for /27” would violate the requirement. The appropriate control instead is to for this protected network, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
“For this protected network, use wildcard 0.0.0.255 to isolate only a 32-address /27 subset” would violate the requirement. The appropriate control instead is to for this protected network, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
Incorrect Answers
“For this protected network, collect targeted evidence to compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that for this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
“For this protected network, confirm the repair by checking that show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that for this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
“For this protected network, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26” is the controlled implementation, not an unsafe workaround. Confirm that for this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
Question 611
An engineer must resolve the following situation: A router should block one source subnet from only one application network but let it use other destinations. Select the most appropriate solution.
Explanation
Correct Answer
The action 'Place the source-only standard ACL near the intended destination where it limits unrelated destinations least.' directly addresses the standard acl placement requirement in this situation: A router should block one source subnet from only one application network but let it use other destinations. The relevant network mechanism is that a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. A successful change should show that the blocked source cannot reach the protected target, while it still reaches other approved networks. To distinguish a genuine correction from a superficial change, inspect ip access-group placement, ACL source match, path direction, show access-lists counts and test multiple destinations.
Incorrect Answers
“Expect a standard ACL to distinguish HTTPS from SSH by destination port” does not implement the control that the facts call for. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Instead, place the source-only standard ACL near the intended destination where it limits unrelated destinations least.
“Apply a source-only deny at the network entrance and block every destination reached by that source” does not implement the control that the facts call for. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Instead, place the source-only standard ACL near the intended destination where it limits unrelated destinations least.
“Put an inbound ACL on the wrong interface direction without testing traffic paths” would not meet the requirement. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Instead, place the source-only standard ACL near the intended destination where it limits unrelated destinations least.
Question 612
For the condition 'A router should block one source subnet from only one application network but let it use other destinations.' which networking principle best explains the correct solution?
Explanation
Correct Answer
A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Place the source-only standard ACL near the intended destination where it limits unrelated destinations least. The decisive evidence is that the blocked source cannot reach the protected target, while it still reaches other approved networks.
Incorrect Answers
“Excessive or stale permissions increase attack impact; authentication, authorization and revocation must reflect actual job needs” pertains to user security policy, not the deciding condition here. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. The implementation must place the source-only standard ACL near the intended destination where it limits unrelated destinations least.
The choice “ACL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits” concerns wildcard mask in extended acl; it does not resolve the stated requirement. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
“IPsec can provide confidentiality, integrity and peer authentication over an untrusted network; tunnel selectors and routing must cover actual internal prefixes” pertains to site-to-site vpn confidentiality, not the deciding condition here. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. The implementation must place the source-only standard ACL near the intended destination where it limits unrelated destinations least.
Question 613
For this situation: A router should block one source subnet from only one application network but let it use other destinations. Which test would prove the configuration is behaving as intended?
Explanation
Correct Answer
The observation 'The blocked source cannot reach the protected target, while it still reaches other approved networks.' specifically demonstrates a successful outcome for standard acl placement in this case: A router should block one source subnet from only one application network but let it use other destinations. That observation tests the underlying mechanism that a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to place the source-only standard ACL near the intended destination where it limits unrelated destinations least. If it fails, inspect ip access-group placement, ACL source match, path direction, show access-lists counts and test multiple destinations. to isolate the remaining defect.
Incorrect Answers
The choice “VPN security associations establish and counters increase for protected traffic; packet capture on public link does not reveal cleartext payload” concerns site-to-site vpn confidentiality; it does not resolve the stated requirement. The blocked source cannot reach the protected target, while it still reaches other approved networks.
“A read-only account cannot change device configuration and a revoked user can no longer connect, with audit evidence” pertains to user security policy, not the deciding condition here. The blocked source cannot reach the protected target, while it still reaches other approved networks. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
The choice “show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match” concerns wildcard mask in extended acl; it does not resolve the stated requirement. The blocked source cannot reach the protected target, while it still reaches other approved networks.
Question 614
Which inspection best distinguishes the problem mechanism in this incident: A router should block one source subnet from only one application network but let it use other destinations.
Explanation
Correct Answer
The investigation 'Inspect ip access-group placement, ACL source match, path direction, show access-lists counts and test multiple destinations.' examines the variables most likely to explain standard acl placement in this situation: A router should block one source subnet from only one application network but let it use other destinations. Those checks are directly tied to the behavior that a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. The engineer can correlate this evidence with the expected outcome that the blocked source cannot reach the protected target, while it still reaches other approved networks. and decide whether to place the source-only standard ACL near the intended destination where it limits unrelated destinations least.
Incorrect Answers
The choice “Inspect access roles, AAA accounts, VPN credentials, group memberships and periodic access reviews” concerns user security policy; it does not resolve the stated requirement. Inspect ip access-group placement, ACL source match, path direction, show access-lists counts and test multiple destinations.
“Inspect show crypto ikev2 sa, show crypto ipsec sa, peer addressing, protected selectors and route/ACL interactions” pertains to site-to-site vpn confidentiality, not the deciding condition here. Inspect ip access-group placement, ACL source match, path direction, show access-lists counts and test multiple destinations. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
The choice “Compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters” concerns wildcard mask in extended acl; it does not resolve the stated requirement. Inspect ip access-group placement, ACL source match, path direction, show access-lists counts and test multiple destinations.
Question 615
Two bad design choices are hidden in this change plan: A router should block one source subnet from only one application network but let it use other destinations. Which TWO should not be approved? Select TWO answers.
Explanation
Correct Answer
“Expect a standard ACL to distinguish HTTPS from SSH by destination port” would violate the requirement. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
“Apply a source-only deny at the network entrance and block every destination reached by that source” would violate the requirement. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
Incorrect Answers
“Confirm the repair by checking that the blocked source cannot reach the protected target, while it still reaches other approved networks” adds a relevant safeguard or verification step rather than weakening the solution. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Confirm that the blocked source cannot reach the protected target, while it still reaches other approved networks.
“Place the source-only standard ACL near the intended destination where it limits unrelated destinations least” is the controlled implementation, not an unsafe workaround. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
“Collect targeted evidence to inspect ip access-group placement, ACL source match, path direction, show access-lists counts and test multiple destinations” adds a relevant safeguard or verification step rather than weakening the solution. A standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Confirm that the blocked source cannot reach the protected target, while it still reaches other approved networks.
Question 616
On a Cisco-based network, A standard ACL filters 10.20.6.0/24 and must not accidentally drop that source's traffic to unrelated networks. Which change most directly solves the stated requirement?
Explanation
Correct Answer
The action 'For this protected network, place the source-only standard ACL near the intended destination where it limits unrelated destinations least.' directly addresses the standard acl placement requirement in this situation: A standard ACL filters 10.20.6.0/24 and must not accidentally drop that source's traffic to unrelated networks. The relevant network mechanism is that a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. A successful change should show that the blocked source cannot reach the protected target, while it still reaches other approved networks. To distinguish a genuine correction from a superficial change, inspect ip access-group placement, ACL source match, path direction, show access-lists counts and test multiple destinations.
Incorrect Answers
“For this protected network, put an inbound ACL on the wrong interface direction without testing traffic paths” would not meet the requirement. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Instead, for this protected network, place the source-only standard ACL near the intended destination where it limits unrelated destinations least.
“For this protected network, expect a standard ACL to distinguish HTTPS from SSH by destination port” does not implement the control that the facts call for. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Instead, for this protected network, place the source-only standard ACL near the intended destination where it limits unrelated destinations least.
“For this protected network, apply a source-only deny at the network entrance and block every destination reached by that source” does not implement the control that the facts call for. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Instead, for this protected network, place the source-only standard ACL near the intended destination where it limits unrelated destinations least.
Question 617
A team is reviewing the design for this case: A standard ACL filters 10.20.6.0/24 and must not accidentally drop that source's traffic to unrelated networks. What technical behavior is decisive?
Explanation
Correct Answer
For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. For this protected network, place the source-only standard ACL near the intended destination where it limits unrelated destinations least.
Incorrect Answers
The choice “For this protected network, iPsec can provide confidentiality, integrity and peer authentication over an untrusted network; tunnel selectors and routing must cover actual internal prefixes” concerns site-to-site vpn confidentiality; it does not resolve the stated requirement. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
The choice “For this protected network, excessive or stale permissions increase attack impact; authentication, authorization and revocation must reflect actual job needs” concerns user security policy; it does not resolve the stated requirement. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
The choice “For this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits” concerns wildcard mask in extended acl; it does not resolve the stated requirement. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
Question 618
An engineer implements a fix for 'A standard ACL filters 10.20.6.0/24 and must not accidentally drop that source's traffic to unrelated networks.'. Which result would conclusively validate the intended change?
Explanation
Correct Answer
On a Cisco-based network, A standard ACL filters 10.20.6.0/24 and must not accidentally drop that source's traffic to unrelated networks. Which change most directly solves the stated requirement. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. For this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks.
Incorrect Answers
“For this protected network, vPN security associations establish and counters increase for protected traffic; packet capture on public link does not reveal cleartext payload” pertains to site-to-site vpn confidentiality, not the deciding condition here. For this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
“For this protected network, show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match” pertains to wildcard mask in extended acl, not the deciding condition here. For this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
“For this protected network, a read-only account cannot change device configuration and a revoked user can no longer connect, with audit evidence” pertains to user security policy, not the deciding condition here. For this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
Question 619
For the case 'A standard ACL filters 10.20.6.0/24 and must not accidentally drop that source's traffic to unrelated networks.', which targeted checks should be compared before a disruptive change?
Explanation
Correct Answer
On a Cisco-based network, A standard ACL filters 10.20.6.0/24 and must not accidentally drop that source's traffic to unrelated networks. Which change most directly solves the stated requirement. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. For this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks. The observable acceptance condition here is: For this protected network, inspect ip access-group placement, ACL source match, path direction, show access-lists counts and test multiple destinations.
Incorrect Answers
“For this protected network, compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters” pertains to wildcard mask in extended acl, not the deciding condition here. For this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
“For this protected network, inspect access roles, AAA accounts, VPN credentials, group memberships and periodic access reviews” pertains to user security policy, not the deciding condition here. For this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
“For this protected network, inspect show crypto ikev2 sa, show crypto ipsec sa, peer addressing, protected selectors and route/ACL interactions” pertains to site-to-site vpn confidentiality, not the deciding condition here. For this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
Question 620
Network review: A standard ACL filters 10.20.6.0/24 and must not accidentally drop that source's traffic to unrelated networks. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
“For this protected network, expect a standard ACL to distinguish HTTPS from SSH by destination port” would violate the requirement. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
“For this protected network, apply a source-only deny at the network entrance and block every destination reached by that source” would violate the requirement. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source.
Incorrect Answers
“For this protected network, place the source-only standard ACL near the intended destination where it limits unrelated destinations least” is the controlled implementation, not an unsafe workaround. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Confirm that for this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks.
“For this protected network, collect targeted evidence to inspect ip access-group placement, ACL source match, path direction, show access-lists counts and test multiple destinations” adds a relevant safeguard or verification step rather than weakening the solution. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Confirm that for this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks.
“For this protected network, confirm the repair by checking that the blocked source cannot reach the protected target, while it still reaches other approved networks” adds a relevant safeguard or verification step rather than weakening the solution. For this protected network, a standard ACL ordinarily matches source IP, not destination or TCP port, so upstream application can unintentionally block all routes from a source. Confirm that for this protected network, the blocked source cannot reach the protected target, while it still reaches other approved networks.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 60 - 10 Questions (Last Reviewed 15-Nov-2026)
- Cisco 200-301 Practice Test 61 - 10 Questions (Last Reviewed 14-Nov-2026)
- Cisco 200-301 Practice Test 62 - 10 Questions (Last Reviewed 13-Nov-2026)
- Cisco 200-301 Practice Test 63 - 10 Questions (Last Reviewed 12-Nov-2026)
- Cisco 200-301 Practice Test 64 - 10 Questions (Last Reviewed 11-Nov-2026)
