Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 60
Question 590
For this incident: A regulated network replaces SNMPv2c polling with authenticated and encrypted management retrieval. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
“For this service path, disable authentication and encryption for SNMPv3 while claiming confidentiality” would violate the requirement. The appropriate control instead is to for this service path, configure SNMPv3 users/groups with authentication and privacy plus least-privilege polling access.
“For this service path, expose a public read-write v2c community to the whole office network” would violate the requirement. The appropriate control instead is to for this service path, configure SNMPv3 users/groups with authentication and privacy plus least-privilege polling access.
Incorrect Answers
“For this service path, collect targeted evidence to inspect show snmp user, group view, manager settings, authentication/privacy algorithms, access policy and UDP 161 reachability” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that for this service path, sNMPv3 authentication verifies the management principal and privacy encrypts management messages; v2c community strings lack these protections.
“For this service path, confirm the repair by checking that monitoring receives the expected counters with authPriv and unauthorized or downgraded requests are rejected” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that for this service path, sNMPv3 authentication verifies the management principal and privacy encrypts management messages; v2c community strings lack these protections.
“For this service path, configure SNMPv3 users/groups with authentication and privacy plus least-privilege polling access” is the controlled implementation, not an unsafe workaround. Confirm that for this service path, sNMPv3 authentication verifies the management principal and privacy encrypts management messages; v2c community strings lack these protections.
Question 591
An engineer must resolve the following situation: A core switch generates interface error messages but the syslog collector only shows low-priority informational events. Select the most appropriate solution.
Explanation
Correct Answer
The action 'Configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.' directly addresses the syslog severity and qos trust requirement in this situation: A core switch generates interface error messages but the syslog collector only shows low-priority informational events. The relevant network mechanism is that syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. A successful change should show that the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion. To distinguish a genuine correction from a superficial change, inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters.
Incorrect Answers
“Trust every unverified edge-host QoS marking as high priority without policy classification” does not implement the control that the facts call for. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Instead, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
“Suppress every warning/error log while asserting the collector has full incident evidence” does not implement the control that the facts call for. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Instead, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
“Set all important voice packets to best-effort without checking congestion impact” would not meet the requirement. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Instead, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
Question 592
For the condition 'A core switch generates interface error messages but the syslog collector only shows low-priority informational events.' which networking principle best explains the correct solution?
Explanation
Correct Answer
Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
Incorrect Answers
“PAT distinguishes connections from many private inside-local addresses using translated ports on one inside-global IPv4 address” pertains to dynamic nat overload pat, not the deciding condition here. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. The implementation must configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
The choice “DNS resolves names to IP records; successful reachability by literal IP with name failures isolates the problem above basic IP routing” concerns dns lookup versus routing problem; it does not resolve the stated requirement. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
“Static NAT creates a persistent one-to-one address translation; upstream routing and access policy are still required for actual reachability” pertains to static one-to-one nat mapping, not the deciding condition here. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. The implementation must configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
Question 593
For this situation: A core switch generates interface error messages but the syslog collector only shows low-priority informational events. Which test would prove the configuration is behaving as intended?
Explanation
Correct Answer
Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. The desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
Incorrect Answers
The choice “nslookup or dig returns the expected A/AAAA answer from the intended resolver, and access by hostname then works” concerns dns lookup versus routing problem; it does not resolve the stated requirement. The desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
“Show ip nat translations shows the stable mapping and outside tests reach the intended service without exposing unrelated ports” pertains to static one-to-one nat mapping, not the deciding condition here. The desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
“Show ip nat translations displays unique inside-local sockets mapped to appropriate global ports; independent hosts access external resources” pertains to dynamic nat overload pat, not the deciding condition here. The desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
Question 594
Which inspection best distinguishes the problem mechanism in this incident: A core switch generates interface error messages but the syslog collector only shows low-priority informational events.
Explanation
Correct Answer
The investigation 'Inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters.' examines the variables most likely to explain syslog severity and qos trust in this situation: A core switch generates interface error messages but the syslog collector only shows low-priority informational events. Those checks are directly tied to the behavior that syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. The engineer can correlate this evidence with the expected outcome that the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion. and decide whether to configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
Incorrect Answers
The choice “Inspect show ip nat translations, static rule, inside/outside interfaces, upstream route and applied ACLs” concerns static one-to-one nat mapping; it does not resolve the stated requirement. Inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters.
The choice “Inspect show ip nat statistics, show ip nat translations, NAT matching ACL, ip nat inside/outside and default route” concerns dynamic nat overload pat; it does not resolve the stated requirement. Inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters.
“Compare configured DNS server, query response code, resolver path, search suffix, zone record and TTL/cache effects” pertains to dns lookup versus routing problem, not the deciding condition here. Inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
Question 595
Two bad design choices are hidden in this change plan: A core switch generates interface error messages but the syslog collector only shows low-priority informational events. Which TWO should not be approved? Select TWO answers.
Explanation
Correct Answer
“Suppress every warning/error log while asserting the collector has full incident evidence” would violate the requirement. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
“Set all important voice packets to best-effort without checking congestion impact” would violate the requirement. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
Incorrect Answers
“Collect targeted evidence to inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters” adds a relevant safeguard or verification step rather than weakening the solution. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Confirm that the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
“Configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic” is the controlled implementation, not an unsafe workaround. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
“Confirm the repair by checking that the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion” adds a relevant safeguard or verification step rather than weakening the solution. Syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Confirm that the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
Question 596
On a Cisco-based network, A WAN interface carries voice traffic with DSCP EF but upstream policies do not preserve the required queue priority. Which change most directly solves the stated requirement?
Explanation
Correct Answer
For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. For this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
Incorrect Answers
“For this service path, set all important voice packets to best-effort without checking congestion impact” would not meet the requirement. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Instead, for this service path, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
“For this service path, suppress every warning/error log while asserting the collector has full incident evidence” does not implement the control that the facts call for. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Instead, for this service path, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
“For this service path, trust every unverified edge-host QoS marking as high priority without policy classification” does not implement the control that the facts call for. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Instead, for this service path, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
Question 597
A team is reviewing the design for this case: A WAN interface carries voice traffic with DSCP EF but upstream policies do not preserve the required queue priority. What technical behavior is decisive?
Explanation
Correct Answer
For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. For this service path, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic. The decisive evidence is that for this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
Incorrect Answers
“For this service path, static NAT creates a persistent one-to-one address translation; upstream routing and access policy are still required for actual reachability” pertains to static one-to-one nat mapping, not the deciding condition here. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. The implementation must for this service path, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
“For this service path, dNS resolves names to IP records; successful reachability by literal IP with name failures isolates the problem above basic IP routing” pertains to dns lookup versus routing problem, not the deciding condition here. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. The implementation must for this service path, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
“For this service path, pAT distinguishes connections from many private inside-local addresses using translated ports on one inside-global IPv4 address” pertains to dynamic nat overload pat, not the deciding condition here. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. The implementation must for this service path, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic.
Question 598
An engineer implements a fix for 'A WAN interface carries voice traffic with DSCP EF but upstream policies do not preserve the required queue priority.'. Which result would conclusively validate the intended change?
Explanation
Correct Answer
An engineer implements a fix for 'A WAN interface carries voice traffic with DSCP EF but upstream policies do not preserve the required queue priority. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. For this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
Incorrect Answers
“For this service path, nslookup or dig returns the expected A/AAAA answer from the intended resolver, and access by hostname then works” pertains to dns lookup versus routing problem, not the deciding condition here. For this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
“For this service path, show ip nat translations displays unique inside-local sockets mapped to appropriate global ports; independent hosts access external resources” pertains to dynamic nat overload pat, not the deciding condition here. For this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
“For this service path, show ip nat translations shows the stable mapping and outside tests reach the intended service without exposing unrelated ports” pertains to static one-to-one nat mapping, not the deciding condition here. For this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
Question 599
For the case 'A WAN interface carries voice traffic with DSCP EF but upstream policies do not preserve the required queue priority.', which targeted checks should be compared before a disruptive change?
Explanation
Correct Answer
For this service path, inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. For this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
Incorrect Answers
The choice “For this service path, inspect show ip nat statistics, show ip nat translations, NAT matching ACL, ip nat inside/outside and default route” concerns dynamic nat overload pat; it does not resolve the stated requirement. For this service path, inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters.
The choice “For this service path, compare configured DNS server, query response code, resolver path, search suffix, zone record and TTL/cache effects” concerns dns lookup versus routing problem; it does not resolve the stated requirement. For this service path, inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters.
The choice “For this service path, inspect show ip nat translations, static rule, inside/outside interfaces, upstream route and applied ACLs” concerns static one-to-one nat mapping; it does not resolve the stated requirement. For this service path, inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters.
Question 600
Network review: A WAN interface carries voice traffic with DSCP EF but upstream policies do not preserve the required queue priority. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
“For this service path, set all important voice packets to best-effort without checking congestion impact” would violate the requirement. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
“For this service path, suppress every warning/error log while asserting the collector has full incident evidence” would violate the requirement. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
Incorrect Answers
“For this service path, collect targeted evidence to inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters” adds a relevant safeguard or verification step rather than weakening the solution. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Confirm that for this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
“For this service path, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic” is the controlled implementation, not an unsafe workaround. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Confirm that for this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
“For this service path, confirm the repair by checking that the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion” adds a relevant safeguard or verification step rather than weakening the solution. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Confirm that for this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 58 - 10 Questions (Last Reviewed 17-Nov-2026)
- Cisco 200-301 Practice Test 59 - 10 Questions (Last Reviewed 16-Nov-2026)
- Cisco 200-301 Practice Test 60 - 10 Questions (Last Reviewed 15-Nov-2026)
- Cisco 200-301 Practice Test 61 - 10 Questions (Last Reviewed 14-Nov-2026)
- Cisco 200-301 Practice Test 62 - 10 Questions (Last Reviewed 13-Nov-2026)
