Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 61
Question 600
Network review: A WAN interface carries voice traffic with DSCP EF but upstream policies do not preserve the required queue priority. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
“For this service path, set all important voice packets to best-effort without checking congestion impact” would violate the requirement. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
“For this service path, suppress every warning/error log while asserting the collector has full incident evidence” would violate the requirement. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion.
Incorrect Answers
“For this service path, collect targeted evidence to inspect show logging, remote collector filter, show policy-map interface, DSCP markings and egress queue counters” adds a relevant safeguard or verification step rather than weakening the solution. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Confirm that for this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
“For this service path, configure the relevant syslog severity threshold and apply an appropriate classification and egress queue policy for priority traffic” is the controlled implementation, not an unsafe workaround. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Confirm that for this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
“For this service path, confirm the repair by checking that the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion” adds a relevant safeguard or verification step rather than weakening the solution. For this service path, syslog severity determines which device events are sent to logging systems, while QoS uses traffic markings and queue treatment to manage congestion. Confirm that for this service path, the desired error-level log arrives with correct timestamp and voice traffic meets measured loss/latency thresholds during congestion.
Question 601
Consider this operational failure: A router ACL should match 192.168.40.64/27 only, and the engineer must choose its wildcard. What should the administrator implement first?
Explanation
Correct Answer
The action 'Use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.' directly addresses the wildcard mask in extended acl requirement in this situation: A router ACL should match 192.168.40.64/27 only, and the engineer must choose its wildcard. The relevant network mechanism is that aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits. A successful change should show that show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match. To distinguish a genuine correction from a superficial change, compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters.
Incorrect Answers
“Use subnet mask 255.255.255.224 as an IOS ACL wildcard for /27” does not implement the control that the facts call for. Instead, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
“Assume an ACL wildcard is a destination port number rather than address matching bits” would not meet the requirement. Instead, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
“Use wildcard 0.0.0.255 to isolate only a 32-address /27 subset” does not implement the control that the facts call for. Instead, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
Question 602
While troubleshooting 'A router ACL should match 192.168.40.64/27 only, and the engineer must choose its wildcard.', which underlying protocol rule should guide the decision?
Explanation
Correct Answer
ACL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits. Show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match.
Incorrect Answers
“AAA separates authentication, authorization and accounting; a central service can record individual access rather than one shared device password” pertains to aaa authentication, not the deciding condition here. ACL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
The choice “DHCP snooping blocks server replies on untrusted ports while recording lease bindings for correctly authorized clients” concerns dhcp snooping trusted uplinks; it does not resolve the stated requirement. ACL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
The choice “DAI validates sender IP/MAC associations against trusted bindings and rejects forged ARP on untrusted switch ports” concerns dynamic arp inspection binding dependency; it does not resolve the stated requirement. ACL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
Question 603
Which measurable result should be checked before closing this ticket: A router ACL should match 192.168.40.64/27 only, and the engineer must choose its wildcard.
Explanation
Correct Answer
The observation 'show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match.' specifically demonstrates a successful outcome for wildcard mask in extended acl in this case: A router ACL should match 192.168.40.64/27 only, and the engineer must choose its wildcard. That observation tests the underlying mechanism that aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26. If it fails, compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters. to isolate the remaining defect.
Incorrect Answers
The choice “Clients obtain legitimate leases, rogue DHCP offers are dropped, and show ip dhcp snooping binding records client MAC/IP/VLAN/port” concerns dhcp snooping trusted uplinks; it does not resolve the stated requirement. Show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match.
“The forged gateway ARP fails validation while authorized static and DHCP clients resolve the real gateway normally” pertains to dynamic arp inspection binding dependency, not the deciding condition here. Show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match.
“Revoked users fail login, approved users receive intended privilege and accounting records show identity and action” pertains to aaa authentication, not the deciding condition here. Show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match.
Question 604
Before modifying more devices to address 'A router ACL should match 192.168.40.64/27 only, and the engineer must choose its wildcard.', which diagnostic evidence is most relevant?
Explanation
Correct Answer
The investigation 'Compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters.' examines the variables most likely to explain wildcard mask in extended acl in this situation: A router ACL should match 192.168.40.64/27 only, and the engineer must choose its wildcard. Those checks are directly tied to the behavior that aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits. The engineer can correlate this evidence with the expected outcome that show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match. and decide whether to use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
Incorrect Answers
The choice “Inspect show ip dhcp snooping, trust state, binding table, rate limits and DHCP offer captures” concerns dhcp snooping trusted uplinks; it does not resolve the stated requirement. ACL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
The choice “Inspect aaa new-model, login method list, server reachability, authorization rules and accounting logs” concerns aaa authentication; it does not resolve the stated requirement. ACL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
The choice “Inspect show ip arp inspection statistics, DHCP snooping bindings, inspection ACL and trusted-port roles” concerns dynamic arp inspection binding dependency; it does not resolve the stated requirement. ACL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
Question 605
A change board considers the issue 'A router ACL should match 192.168.40.64/27 only, and the engineer must choose its wildcard.'. Identify the TWO decisions that should be rejected. Select TWO answers.
Explanation
Correct Answer
“Use wildcard 0.0.0.255 to isolate only a 32-address /27 subset” would violate the requirement. The appropriate control instead is to use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
“Use subnet mask 255.255.255.224 as an IOS ACL wildcard for /27” would violate the requirement. The appropriate control instead is to use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
Incorrect Answers
“Collect targeted evidence to compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters” adds a relevant safeguard or verification step rather than weakening the solution.
“Use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26” is the controlled implementation, not an unsafe workaround. Confirm that show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match.
“Confirm the repair by checking that show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match” adds a relevant safeguard or verification step rather than weakening the solution.
Question 606
A network operator receives this ticket: A management ACL should allow 10.18.50.128/26 but deny other hosts in the parent /24. Which configuration is best suited to the reported issue?
Explanation
Correct Answer
The action 'For this protected network, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.' directly addresses the wildcard mask in extended acl requirement in this situation: A management ACL should allow 10.18.50.128/26 but deny other hosts in the parent /24. The relevant network mechanism is that aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits. A successful change should show that show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match. To distinguish a genuine correction from a superficial change, compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters.
Incorrect Answers
“For this protected network, assume an ACL wildcard is a destination port number rather than address matching bits” would not meet the requirement. Instead, for this protected network, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
“For this protected network, use subnet mask 255.255.255.224 as an IOS ACL wildcard for /27” does not implement the control that the facts call for. Instead, for this protected network, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
“For this protected network, use wildcard 0.0.0.255 to isolate only a 32-address /27 subset” does not implement the control that the facts call for. Instead, for this protected network, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
Question 607
Which network-layer or protocol behavior most directly explains the result in this case: A management ACL should allow 10.18.50.128/26 but deny other hosts in the parent /24.
Explanation
Correct Answer
For this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits. If this test fails, for this protected network, compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters.
Incorrect Answers
The choice “For this protected network, aAA separates authentication, authorization and accounting; a central service can record individual access rather than one shared device password” concerns aaa authentication; it does not resolve the stated requirement. For this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
The choice “For this protected network, dHCP snooping blocks server replies on untrusted ports while recording lease bindings for correctly authorized clients” concerns dhcp snooping trusted uplinks; it does not resolve the stated requirement. For this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
The choice “For this protected network, dAI validates sender IP/MAC associations against trusted bindings and rejects forged ARP on untrusted switch ports” concerns dynamic arp inspection binding dependency; it does not resolve the stated requirement. For this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
Question 608
After correcting 'A management ACL should allow 10.18.50.128/26 but deny other hosts in the parent /24.', which observation is the strongest evidence that the specific requirement is met?
Explanation
Correct Answer
For this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
Incorrect Answers
“For this protected network, clients obtain legitimate leases, rogue DHCP offers are dropped, and show ip dhcp snooping binding records client MAC/IP/VLAN/port” pertains to dhcp snooping trusted uplinks, not the deciding condition here. For this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
“For this protected network, the forged gateway ARP fails validation while authorized static and DHCP clients resolve the real gateway normally” pertains to dynamic arp inspection binding dependency, not the deciding condition here. For this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
“For this protected network, revoked users fail login, approved users receive intended privilege and accounting records show identity and action” pertains to aaa authentication, not the deciding condition here. For this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
Question 609
An operator is triaging the issue 'A management ACL should allow 10.18.50.128/26 but deny other hosts in the parent /24.'. What should be inspected to isolate the actual cause?
Explanation
Correct Answer
The investigation 'For this protected network, compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters.' examines the variables most likely to explain wildcard mask in extended acl in this situation: A management ACL should allow 10.18.50.128/26 but deny other hosts in the parent /24. Those checks are directly tied to the behavior that aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits. The engineer can correlate this evidence with the expected outcome that show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match. and decide whether to use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
Incorrect Answers
“For this protected network, inspect show ip arp inspection statistics, DHCP snooping bindings, inspection ACL and trusted-port roles” pertains to dynamic arp inspection binding dependency, not the deciding condition here. For this protected network, compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters.
“For this protected network, inspect show ip dhcp snooping, trust state, binding table, rate limits and DHCP offer captures” pertains to dhcp snooping trusted uplinks, not the deciding condition here. For this protected network, compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters.
“For this protected network, inspect aaa new-model, login method list, server reachability, authorization rules and accounting logs” pertains to aaa authentication, not the deciding condition here. For this protected network, compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters.
Question 610
For this incident: A management ACL should allow 10.18.50.128/26 but deny other hosts in the parent /24. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
“For this protected network, use subnet mask 255.255.255.224 as an IOS ACL wildcard for /27” would violate the requirement. The appropriate control instead is to for this protected network, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
“For this protected network, use wildcard 0.0.0.255 to isolate only a 32-address /27 subset” would violate the requirement. The appropriate control instead is to for this protected network, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26.
Incorrect Answers
“For this protected network, collect targeted evidence to compute wildcard via 255.255.255.255 minus the subnet mask and inspect ACL line order and hit counters” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that for this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
“For this protected network, confirm the repair by checking that show access-lists increments only for addresses in the intended block; addresses just outside the boundary fail the match” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that for this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
“For this protected network, use the inverse subnet mask in the ACL match, 0.0.0.31 for /27 or 0.0.0.63 for /26” is the controlled implementation, not an unsafe workaround. Confirm that for this protected network, aCL wildcard bits set to 0 require exact source address matches; bits set to 1 ignore corresponding address bits.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 59 - 10 Questions (Last Reviewed 16-Nov-2026)
- Cisco 200-301 Practice Test 60 - 10 Questions (Last Reviewed 15-Nov-2026)
- Cisco 200-301 Practice Test 61 - 10 Questions (Last Reviewed 14-Nov-2026)
- Cisco 200-301 Practice Test 62 - 10 Questions (Last Reviewed 13-Nov-2026)
- Cisco 200-301 Practice Test 63 - 10 Questions (Last Reviewed 12-Nov-2026)
