Cisco 200-301 Practice Test 6 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 6

Question 50

For this incident: A campus upgrade has OM4 multimode inside one building but plans single-mode fiber between buildings over kilometers. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this LAN, use a short-reach multimode optic across a link beyond its rated distance.
  2. For this LAN, collect targeted evidence to inspect optic model and DOM optical power, fiber type, patch polarity, connector cleanliness and show interface counters.
  3. For this LAN, confirm the repair by checking that both ends negotiate the intended rate with stable optical receive power and negligible interface CRC or signal faults.
  4. For this LAN, mix incompatible single-mode and multimode optic characteristics without a converter.
  5. For this LAN, match transceiver optic wavelength, connector, distance rating and single-mode or multimode fiber to the actual link budget.

Explanation

Correct Answer

A:

A campus upgrade has OM4 multimode inside one building but plans single-mode fiber between buildings over kilometers. “Use a short-reach multimode optic across a link beyond its rated distance” would violate the requirement. The appropriate control instead is to match transceiver optic wavelength, connector, distance rating and single-mode or multimode fiber to the actual link budget.

D:

“Mix incompatible single-mode and multimode optic characteristics without a converter” would violate the requirement. The appropriate control instead is to match transceiver optic wavelength, connector, distance rating and single-mode or multimode fiber to the actual link budget.

Incorrect Answers

B:

“collect targeted evidence to inspect optic model and DOM optical power, fiber type, patch polarity, connector cleanliness and show interface counters” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that optics are engineered for particular fiber cores, distances and wavelengths; a link can fail even if connectors physically fit.

C:

“confirm the repair by checking that both ends negotiate the intended rate with stable optical receive power and negligible interface CRC or signal faults” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that optics are engineered for particular fiber cores, distances and wavelengths; a link can fail even if connectors physically fit.

E:

“match transceiver optic wavelength, connector, distance rating and single-mode or multimode fiber to the actual link budget” is the controlled implementation, not an unsafe workaround. Confirm that optics are engineered for particular fiber cores, distances and wavelengths; a link can fail even if connectors physically fit.

Question 51

An engineer must resolve the following situation: A desktop negotiates 100 Mbps instead of 1 Gbps after a patch cord is crushed during furniture installation. Select the most appropriate solution.

  1. Force 10 Mbps half duplex without testing the cable fault.
  2. Treat successful link LEDs as proof all four required pairs are intact.
  3. Test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.
  4. Enable a routing protocol on the failing physical interface to restore broken wire pairs.

Explanation

Correct Answer

C:

The action 'Test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.' directly addresses the copper wiring and speed negotiation requirement in this situation: A desktop negotiates 100 Mbps instead of 1 Gbps after a patch cord is crushed during furniture installation. The relevant network mechanism is that twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. A successful change should show that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic. To distinguish a genuine correction from a superficial change, check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.

Incorrect Answers

A:

“Force 10 Mbps half duplex without testing the cable fault” would not meet the requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. Instead, test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

B:

“Treat successful link LEDs as proof all four required pairs are intact” would not meet the requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. Instead, test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

D:

“Enable a routing protocol on the failing physical interface to restore broken wire pairs” does not implement the control that the facts call for. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. Instead, test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

Question 52

For the condition 'A desktop negotiates 100 Mbps instead of 1 Gbps after a patch cord is crushed during furniture installation.' which networking principle best explains the correct solution?

  1. 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
  2. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.
  3. IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
  4. SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.

Explanation

Correct Answer

B:

Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. Test and replace the damaged copper segment and validate pair continuity and interface autonegotiation. The decisive evidence is that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.

Incorrect Answers

A:

“2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close” does not fully explain the decisive technical boundary in this case. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. The implementation must test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

C:

The choice “IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor” concerns ipv6 link-local next-hop; it does not resolve the stated requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

D:

The choice “SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing” concerns ipv6 slaac; it does not resolve the stated requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

Question 53

For this situation: A desktop negotiates 100 Mbps instead of 1 Gbps after a patch cord is crushed during furniture installation. Which test would prove the configuration is behaving as intended?

  1. Spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area.
  2. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.
  3. Client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.
  4. show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.

Explanation

Correct Answer

B:

The observation 'Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.' specifically demonstrates a successful outcome for copper wiring and speed negotiation in this case: A desktop negotiates 100 Mbps instead of 1 Gbps after a patch cord is crushed during furniture installation. That observation tests the underlying mechanism that twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to test and replace the damaged copper segment and validate pair continuity and interface autonegotiation. If it fails, check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters. to isolate the remaining defect.

Incorrect Answers

A:

“Spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area” alone does not establish all the required behavior. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.

C:

“Client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds” pertains to ipv6 slaac, not the deciding condition here. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

D:

Because a desktop negotiates 100 Mbps instead of 1 Gbps after a patch cord is crushed during furniture installation. Select the most appropriate solution, “show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic” pertains to ipv6 link-local next-hop, not the deciding condition here. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

Question 54

Which inspection best distinguishes the problem mechanism in this incident: A desktop negotiates 100 Mbps instead of 1 Gbps after a patch cord is crushed during furniture installation.

  1. Check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.
  2. Inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics.
  3. Inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.
  4. Inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface.

Explanation

Correct Answer

A:

The investigation 'Check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.' examines the variables most likely to explain copper wiring and speed negotiation in this situation: A desktop negotiates 100 Mbps instead of 1 Gbps after a patch cord is crushed during furniture installation. Those checks are directly tied to the behavior that twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. The engineer can correlate this evidence with the expected outcome that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic. and decide whether to test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

Incorrect Answers

B:

“Inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics” would not be the most direct first check for this failure. Check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.

C:

The choice “Inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability” concerns ipv6 slaac; it does not resolve the stated requirement. Check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.

D:

The choice “Inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface” concerns ipv6 link-local next-hop; it does not resolve the stated requirement. Check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.

Question 55

Two bad design choices are hidden in this change plan: A desktop negotiates 100 Mbps instead of 1 Gbps after a patch cord is crushed during furniture installation. Which TWO should not be approved? Select TWO answers.

  1. Enable a routing protocol on the failing physical interface to restore broken wire pairs.
  2. Test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.
  3. Collect targeted evidence to check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.
  4. Confirm the repair by checking that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.
  5. Force 10 Mbps half duplex without testing the cable fault.

Explanation

Correct Answer

A:

“Enable a routing protocol on the failing physical interface to restore broken wire pairs” would violate the requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

E:

“Force 10 Mbps half duplex without testing the cable fault” would violate the requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

Incorrect Answers

B:

“Test and replace the damaged copper segment and validate pair continuity and interface autonegotiation” is the controlled implementation, not an unsafe workaround. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. Confirm that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.

C:

“Collect targeted evidence to check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters” adds a relevant safeguard or verification step rather than weakening the solution. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

D:

“Confirm the repair by checking that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic” adds a relevant safeguard or verification step rather than weakening the solution. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

Question 56

On a Cisco-based network, A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. Which change most directly solves the stated requirement?

  1. For this LAN, treat successful link LEDs as proof all four required pairs are intact.
  2. For this LAN, enable a routing protocol on the failing physical interface to restore broken wire pairs.
  3. For this LAN, force 10 Mbps half duplex without testing the cable fault.
  4. For this LAN, test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

Explanation

Correct Answer

D:

The action 'For this LAN, test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.' directly addresses the copper wiring and speed negotiation requirement in this situation: A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. The relevant network mechanism is that twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. A successful change should show that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic. To distinguish a genuine correction from a superficial change, check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.

Incorrect Answers

A:

On a Cisco-based network, A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. “Treat successful link LEDs as proof all four required pairs are intact” would not meet the requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. Instead, test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

B:

On a Cisco-based network, A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. “enable a routing protocol on the failing physical interface to restore broken wire pairs” does not implement the control that the facts call for. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. Instead, test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

C:

On a Cisco-based network, A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. “Force 10 Mbps half duplex without testing the cable fault” would not meet the requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. Instead, test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

Question 57

A team is reviewing the design for this case: A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. What technical behavior is decisive?

  1. For this LAN, iPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor.
  2. For this LAN, sLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing.
  3. For this LAN, 2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close.
  4. For this LAN, twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

Explanation

Correct Answer

D:

On a Cisco-based network, A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. Which change most directly solves the stated requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. Test and replace the damaged copper segment and validate pair continuity and interface autonegotiation. The decisive evidence is that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.

Incorrect Answers

A:

“IPv6 link-local addresses are interface scoped and may repeat on different links; the interface disambiguates the neighbor” pertains to ipv6 link-local next-hop, not the deciding condition here. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. The implementation must test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

B:

“SLAAC hosts build a global unicast address using an RA-advertised prefix; link-local FE80:: addressing exists independently of global routing” pertains to ipv6 slaac, not the deciding condition here. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. The implementation must test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

C:

A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. “2.4-GHz Wi-Fi has limited non-overlapping 20-MHz channels; adjacent channels overlap and interfere when cells are close” does not fully explain the decisive technical boundary in this case. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. The implementation must test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

Question 58

An engineer implements a fix for 'A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed.'. Which result would conclusively validate the intended change?

  1. For this LAN, cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.
  2. For this LAN, show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic.
  3. For this LAN, client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds.
  4. For this LAN, spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area.

Explanation

Correct Answer

A:

Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.

Incorrect Answers

B:

On a Cisco-based network, A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. Which change most directly solves the stated requirement. “Show ipv6 route shows the correct route and interface, and neighbor discovery resolves the intended peer for off-link traffic” pertains to ipv6 link-local next-hop, not the deciding condition here. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

C:

An engineer implements a fix for 'A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. “Client shows a global /64 address and default route via the router's link-local address, and off-link IPv6 traffic succeeds” pertains to ipv6 slaac, not the deciding condition here. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

D:

“Spectrum survey shows reduced adjacent-channel overlap, stable signal quality and improved retransmission rates in the affected area” alone does not establish all the required behavior. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

Question 59

For the case 'A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed.', which targeted checks should be compared before a disruptive change?

  1. For this LAN, inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics.
  2. For this LAN, check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.
  3. For this LAN, inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface.
  4. For this LAN, inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability.

Explanation

Correct Answer

B:

The investigation 'For this LAN, check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.' examines the variables most likely to explain copper wiring and speed negotiation in this situation: A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. Those checks are directly tied to the behavior that twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss. The engineer can correlate this evidence with the expected outcome that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic. and decide whether to test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.

Incorrect Answers

A:

“Inspect AP channel assignments, channel width, neighboring RSSI, spectrum noise and radio retry statistics” alone does not establish all the required behavior. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.

C:

The choice “inspect show ipv6 neighbors, interface scope, show ipv6 route and ping ipv6 using the correct interface” concerns ipv6 link-local next-hop; it does not resolve the stated requirement. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.

D:

The choice “inspect show ipv6 interface, RA flags and prefixes, client ip -6 addr and ip -6 route and ICMPv6 reachability” concerns ipv6 slaac; it does not resolve the stated requirement. Cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.

Question 60

Network review: A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this LAN, enable a routing protocol on the failing physical interface to restore broken wire pairs.
  2. For this LAN, collect targeted evidence to check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters.
  3. For this LAN, test and replace the damaged copper segment and validate pair continuity and interface autonegotiation.
  4. For this LAN, confirm the repair by checking that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic.
  5. For this LAN, force 10 Mbps half duplex without testing the cable fault.

Explanation

Correct Answer

A:

A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. “Enable a routing protocol on the failing physical interface to restore broken wire pairs” would violate the requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

E:

A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. “Force 10 Mbps half duplex without testing the cable fault” would violate the requirement. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

Incorrect Answers

B:

A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. “collect targeted evidence to check cable test results, show interface speed/duplex, run TDR when supported and examine CRC and alignment counters” adds a relevant safeguard or verification step rather than weakening the solution. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

C:

“test and replace the damaged copper segment and validate pair continuity and interface autonegotiation” is the controlled implementation, not an unsafe workaround. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

D:

A camera runs through a patch panel and drops its Ethernet link intermittently when the cable is disturbed. “confirm the repair by checking that cable certification passes and both interfaces maintain the intended duplex and speed with counters stable under traffic” adds a relevant safeguard or verification step rather than weakening the solution. Twisted-pair Ethernet needs appropriate wire pairs and cable quality; damaged or missing pairs can reduce speed or cause loss.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests