Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 46
Question 450
For this incident: A replacement router joins OSPF but duplicates a neighbor's router ID inherited from an image. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
“Change only the interface IP mask while leaving duplicate router IDs” would violate the requirement. The appropriate control instead is to assign a unique OSPF router ID and reset or reinitialize the affected process as required.
A replacement router joins OSPF but duplicates a neighbor's router ID inherited from an image. “Copy the same OSPF router ID onto all routers to simplify management” would violate the requirement. The appropriate control instead is to assign a unique OSPF router ID and reset or reinitialize the affected process as required.
Incorrect Answers
“collect targeted evidence to inspect show ip ospf, neighbor identities, logs about duplicate IDs and the OSPF process restart state” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that an OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency.
“assign a unique OSPF router ID and reset or reinitialize the affected process as required” is the controlled implementation, not an unsafe workaround. Confirm that an OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency.
“confirm the repair by checking that show ip ospf shows distinct router IDs on all routers, and stable FULL neighbors exchange expected LSAs” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that an OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency.
Question 451
An engineer must resolve the following situation: A 10-Gbps interface and a 1-Gbps interface both appear with OSPF cost 1 under an unchanged 100-Mbps reference bandwidth. Select the most appropriate solution.
Explanation
Correct Answer
The action 'Set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.' directly addresses the ospf cost and reference bandwidth requirement in this situation: A 10-Gbps interface and a 1-Gbps interface both appear with OSPF cost 1 under an unchanged 100-Mbps reference bandwidth. The relevant network mechanism is that oSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. A successful change should show that show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test. To distinguish a genuine correction from a superficial change, inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity.
Incorrect Answers
“Assume Ethernet interface names determine OSPF cost independently of reference bandwidth” would not meet the requirement. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Instead, set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
“Set different reference-bandwidth policies on routers without considering inconsistent metrics” does not implement the control that the facts call for. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Instead, set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
“Change spanning-tree bridge priority to modify Layer 3 OSPF path metrics” does not implement the control that the facts call for. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Instead, set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
Question 452
For the condition 'A 10-Gbps interface and a 1-Gbps interface both appear with OSPF cost 1 under an unchanged 100-Mbps reference bandwidth.' which networking principle best explains the correct solution?
Explanation
Correct Answer
OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
Incorrect Answers
“Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address” pertains to local host routes, not the deciding condition here. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. The implementation must set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
“IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination” pertains to longest-prefix-match forwarding, not the deciding condition here. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. The implementation must set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
“HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades” pertains to hsrp active, not the deciding condition here. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. The implementation must set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
Question 453
For this situation: A 10-Gbps interface and a 1-Gbps interface both appear with OSPF cost 1 under an unchanged 100-Mbps reference bandwidth. Which test would prove the configuration is behaving as intended?
Explanation
Correct Answer
Because a 10-Gbps interface and a 1-Gbps interface both appear with OSPF cost 1 under an unchanged 100-Mbps reference bandwidth. Select the most appropriate solution, oSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
Incorrect Answers
“Show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure” pertains to hsrp active, not the deciding condition here. Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
Because a 10-Gbps interface and a 1-Gbps interface both appear with OSPF cost 1 under an unchanged 100-Mbps reference bandwidth. Select the most appropriate solution, the choice “show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination” concerns longest-prefix-match forwarding; it does not resolve the stated requirement. Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
The choice “show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router” concerns local host routes; it does not resolve the stated requirement. Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
Question 454
Which inspection best distinguishes the problem mechanism in this incident: A 10-Gbps interface and a 1-Gbps interface both appear with OSPF cost 1 under an unchanged 100-Mbps reference bandwidth.
Explanation
Correct Answer
The investigation 'Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity.' examines the variables most likely to explain ospf cost and reference bandwidth in this situation: A 10-Gbps interface and a 1-Gbps interface both appear with OSPF cost 1 under an unchanged 100-Mbps reference bandwidth. Those checks are directly tied to the behavior that oSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. The engineer can correlate this evidence with the expected outcome that show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test. and decide whether to set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
Incorrect Answers
“Inspect show ip route connected, show ip interface brief and the interface IP/mask” pertains to local host routes, not the deciding condition here. Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
“Inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution” pertains to longest-prefix-match forwarding, not the deciding condition here. Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
“Inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table” pertains to hsrp active, not the deciding condition here. Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
Question 455
Two bad design choices are hidden in this change plan: A 10-Gbps interface and a 1-Gbps interface both appear with OSPF cost 1 under an unchanged 100-Mbps reference bandwidth. Which TWO should not be approved? Select TWO answers.
Explanation
Correct Answer
“Assume Ethernet interface names determine OSPF cost independently of reference bandwidth” would violate the requirement. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
“Set different reference-bandwidth policies on routers without considering inconsistent metrics” would violate the requirement. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
Incorrect Answers
“Collect targeted evidence to inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity” adds a relevant safeguard or verification step rather than weakening the solution. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Confirm that show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
“Set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain” is the controlled implementation, not an unsafe workaround. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Confirm that show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
“Confirm the repair by checking that show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test” adds a relevant safeguard or verification step rather than weakening the solution. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
Question 456
On a Cisco-based network, A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. Which change most directly solves the stated requirement?
Explanation
Correct Answer
The action 'For this routed path, set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.' directly addresses the ospf cost and reference bandwidth requirement in this situation: A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. The relevant network mechanism is that oSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. A successful change should show that show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test. To distinguish a genuine correction from a superficial change, inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity.
Incorrect Answers
On a Cisco-based network, A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “change spanning-tree bridge priority to modify Layer 3 OSPF path metrics” does not implement the control that the facts call for. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Instead, set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
On a Cisco-based network, A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “set different reference-bandwidth policies on routers without considering inconsistent metrics” does not implement the control that the facts call for. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Instead, set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
On a Cisco-based network, A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “Assume Ethernet interface names determine OSPF cost independently of reference bandwidth” would not meet the requirement. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Instead, set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
Question 457
A team is reviewing the design for this case: A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. What technical behavior is decisive?
Explanation
Correct Answer
OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain. Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
Incorrect Answers
A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “Cisco IOS installs a connected network route and a local /32 host route for a configured IPv4 interface address” pertains to local host routes, not the deciding condition here. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. The implementation must set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “HSRP presents a virtual default gateway while one router is active and another standby; tracking can reduce priority when the active path degrades” pertains to hsrp active, not the deciding condition here. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. The implementation must set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination” pertains to longest-prefix-match forwarding, not the deciding condition here. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. The implementation must set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain.
Question 458
An engineer implements a fix for 'A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces.'. Which result would conclusively validate the intended change?
Explanation
Correct Answer
On a Cisco-based network, A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. Which change most directly solves the stated requirement. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
Incorrect Answers
The choice “show standby brief identifies expected active and standby routers, and clients retain default-gateway reachability during controlled failure” concerns hsrp active; it does not resolve the stated requirement. Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
Because on a Cisco-based network, A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. Which change most directly solves the stated requirement, the choice “show ip route lists C for the connected subnet and L for the exact interface IP, and local packets terminate at the router” concerns local host routes; it does not resolve the stated requirement. Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
The choice “show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination” concerns longest-prefix-match forwarding; it does not resolve the stated requirement. Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
Question 459
For the case 'A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces.', which targeted checks should be compared before a disruptive change?
Explanation
Correct Answer
Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost. Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test.
Incorrect Answers
The choice “inspect show standby brief, group priorities, virtual IP, timers, tracking and switch MAC table” concerns hsrp active; it does not resolve the stated requirement. Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity.
The choice “inspect show ip route connected, show ip interface brief and the interface IP/mask” concerns local host routes; it does not resolve the stated requirement. Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity.
The choice “inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution” concerns longest-prefix-match forwarding; it does not resolve the stated requirement. Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity.
Question 460
Network review: A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “Assume Ethernet interface names determine OSPF cost independently of reference bandwidth” would violate the requirement. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “Set different reference-bandwidth policies on routers without considering inconsistent metrics” would violate the requirement. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
Incorrect Answers
“set an appropriate consistent OSPF reference bandwidth or explicit interface costs across the routing domain” is the controlled implementation, not an unsafe workaround. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
A campus uses multigigabit links and needs meaningful OSPF path preference among high-speed interfaces. “confirm the repair by checking that show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test” adds a relevant safeguard or verification step rather than weakening the solution. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
“collect targeted evidence to inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity” adds a relevant safeguard or verification step rather than weakening the solution. OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 44 - 10 Questions (Last Reviewed 05-Oct-2026)
- Cisco 200-301 Practice Test 45 - 10 Questions (Last Reviewed 04-Oct-2026)
- Cisco 200-301 Practice Test 46 - 10 Questions (Last Reviewed 03-Oct-2026)
- Cisco 200-301 Practice Test 47 - 10 Questions (Last Reviewed 02-Oct-2026)
- Cisco 200-301 Practice Test 48 - 10 Questions (Last Reviewed 01-Oct-2026)
