Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 37
Question 360
Network review: An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which TWO proposed shortcuts would be unsafe in this situation. “Set the default gateway to a distant destination IP in another subnet” would violate the requirement. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly.
An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which TWO proposed shortcuts would be unsafe in this situation. “Delete the subnet mask and expect ARP to discover all remote networks” would violate the requirement. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly.
Incorrect Answers
An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which TWO proposed shortcuts would be unsafe in this situation. “confirm the repair by checking that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN” adds a relevant safeguard or verification step rather than weakening the solution. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Confirm that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
“collect targeted evidence to inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP” adds a relevant safeguard or verification step rather than weakening the solution. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Confirm that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which TWO proposed shortcuts would be unsafe in this situation. “configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet” is the controlled implementation, not an unsafe workaround. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Confirm that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
Question 361
Consider this operational failure: A spoke router lacks a route to 10.55.20.0/24 reachable through 192.0.2.2. What should the administrator implement first?
Explanation
Correct Answer
The action 'Configure ip route for the required destination prefix through the reachable next-hop IPv4 address.' directly addresses the ipv4 next-hop static route requirement in this situation: A spoke router lacks a route to 10.55.20.0/24 reachable through 192.0.2.2. The relevant network mechanism is that a static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route. A successful change should show that show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor. To distinguish a genuine correction from a superficial change, inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts.
Incorrect Answers
“Configure the route with an unrelated remote host address as next hop without recursive reachability” does not implement the control that the facts call for. Instead, configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
“Add the destination prefix as a local VLAN rather than a reachable remote route” does not implement the control that the facts call for. Instead, configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
“Remove the WAN connected prefix and assume the static route resolves itself” would not meet the requirement. Instead, configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
Question 362
While troubleshooting 'A spoke router lacks a route to 10.55.20.0/24 reachable through 192.0.2.2.', which underlying protocol rule should guide the decision?
Explanation
Correct Answer
A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route. Show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor.
Incorrect Answers
The choice “OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost” concerns ospf cost; it does not resolve the stated requirement. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
“An OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency” pertains to ospf duplicate router ids, not the deciding condition here. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
“OSPF peers on the same link must agree on hello and dead intervals; mismatches can prevent successful adjacency” pertains to ospf hello, not the deciding condition here. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
Question 363
Which measurable result should be checked before closing this ticket: A spoke router lacks a route to 10.55.20.0/24 reachable through 192.0.2.2.
Explanation
Correct Answer
Show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor. Configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
Incorrect Answers
“Show ip ospf shows distinct router IDs on all routers, and stable FULL neighbors exchange expected LSAs” pertains to ospf duplicate router ids, not the deciding condition here. Show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor.
“Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test” pertains to ospf cost, not the deciding condition here. Show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor.
“Show ip ospf neighbor progresses to FULL and show ip ospf interface reports matching interval values” pertains to ospf hello, not the deciding condition here. Show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor.
Question 364
Before modifying more devices to address 'A spoke router lacks a route to 10.55.20.0/24 reachable through 192.0.2.2.', which diagnostic evidence is most relevant?
Explanation
Correct Answer
The investigation 'Inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts.' examines the variables most likely to explain ipv4 next-hop static route in this situation: A spoke router lacks a route to 10.55.20.0/24 reachable through 192.0.2.2. Those checks are directly tied to the behavior that a static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route. The engineer can correlate this evidence with the expected outcome that show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor. and decide whether to configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
Incorrect Answers
The choice “Compare hello/dead values, network type, area and authentication on both neighbors using show ip ospf interface” concerns ospf hello; it does not resolve the stated requirement. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
The choice “Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity” concerns ospf cost; it does not resolve the stated requirement. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
The choice “Inspect show ip ospf, neighbor identities, logs about duplicate IDs and the OSPF process restart state” concerns ospf duplicate router ids; it does not resolve the stated requirement. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
Question 365
A change board considers the issue 'A spoke router lacks a route to 10.55.20.0/24 reachable through 192.0.2.2.'. Identify the TWO decisions that should be rejected. Select TWO answers.
Explanation
Correct Answer
“Add the destination prefix as a local VLAN rather than a reachable remote route” would violate the requirement.
“Configure the route with an unrelated remote host address as next hop without recursive reachability” would violate the requirement. The appropriate control instead is to configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
Incorrect Answers
“Collect targeted evidence to inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts” adds a relevant safeguard or verification step rather than weakening the solution.
“Confirm the repair by checking that show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor” adds a relevant safeguard or verification step rather than weakening the solution.
“Configure ip route for the required destination prefix through the reachable next-hop IPv4 address” is the controlled implementation, not an unsafe workaround. An important verification is that show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor.
Question 366
A network operator receives this ticket: A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1. Which configuration is best suited to the reported issue?
Explanation
Correct Answer
Configure ip route for the required destination prefix through the reachable next-hop IPv4 address. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
Incorrect Answers
A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1. “Configure the route with an unrelated remote host address as next hop without recursive reachability” does not implement the control that the facts call for. Instead, configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1. “Remove the WAN connected prefix and assume the static route resolves itself” would not meet the requirement. Instead, configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1. “Add the destination prefix as a local VLAN rather than a reachable remote route” does not implement the control that the facts call for. Instead, configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
Question 367
Which network-layer or protocol behavior most directly explains the result in this case: A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1.
Explanation
Correct Answer
A network operator receives this ticket: A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
Incorrect Answers
A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1. “OSPF peers on the same link must agree on hello and dead intervals; mismatches can prevent successful adjacency” pertains to ospf hello, not the deciding condition here. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1. “An OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency” pertains to ospf duplicate router ids, not the deciding condition here. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
“OSPF interface cost is based on reference bandwidth divided by link bandwidth; a low legacy reference can collapse fast links to the same integer cost” pertains to ospf cost, not the deciding condition here. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
Question 368
After correcting 'A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1.', which observation is the strongest evidence that the specific requirement is met?
Explanation
Correct Answer
Because a network operator receives this ticket: A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1, a static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
Incorrect Answers
“Show ip ospf shows distinct router IDs on all routers, and stable FULL neighbors exchange expected LSAs” pertains to ospf duplicate router ids, not the deciding condition here. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
“Show ip ospf neighbor progresses to FULL and show ip ospf interface reports matching interval values” pertains to ospf hello, not the deciding condition here. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
“Show ip ospf interface shows differentiated costs, and show ip route uses the intended path after a controlled topology test” pertains to ospf cost, not the deciding condition here. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
Question 369
An operator is triaging the issue 'A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1.'. What should be inspected to isolate the actual cause?
Explanation
Correct Answer
Inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts. A static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
Incorrect Answers
“Inspect show ip ospf, neighbor identities, logs about duplicate IDs and the OSPF process restart state” pertains to ospf duplicate router ids, not the deciding condition here. Inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts.
“Inspect show ip ospf interface cost, auto-cost reference-bandwidth across routers and real interface throughput capacity” pertains to ospf cost, not the deciding condition here. Inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts.
“Compare hello/dead values, network type, area and authentication on both neighbors using show ip ospf interface” pertains to ospf hello, not the deciding condition here. Inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts.
Question 370
For this incident: A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
A branch router needs to reach 172.22.30.0/24 via its directly connected WAN neighbor 198.51.100.1. Which TWO practices introduce avoidable network risk. “Configure the route with an unrelated remote host address as next hop without recursive reachability” would violate the requirement. The appropriate control instead is to configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
“Add the destination prefix as a local VLAN rather than a reachable remote route” would violate the requirement. The appropriate control instead is to configure ip route for the required destination prefix through the reachable next-hop IPv4 address.
Incorrect Answers
“confirm the repair by checking that show ip route lists the static destination and packet forwarding reaches the remote subnet through the intended WAN neighbor” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that a static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
“configure ip route for the required destination prefix through the reachable next-hop IPv4 address” is the controlled implementation, not an unsafe workaround. Confirm that a static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
“collect targeted evidence to inspect ip route configuration, show ip route, ARP for directly connected next hop and traceroute from branch hosts” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that a static route maps an IP destination prefix to a next hop or exit interface; the next hop must itself be resolved through a connected route.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 35 - 10 Questions (Last Reviewed 14-Oct-2026)
- Cisco 200-301 Practice Test 36 - 10 Questions (Last Reviewed 13-Oct-2026)
- Cisco 200-301 Practice Test 37 - 10 Questions (Last Reviewed 12-Oct-2026)
- Cisco 200-301 Practice Test 38 - 10 Questions (Last Reviewed 11-Oct-2026)
- Cisco 200-301 Practice Test 39 - 10 Questions (Last Reviewed 10-Oct-2026)
