Pass Cisco 200-301 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 200-301 Practice Test 36
Question 350
For this incident: A router has two OSPF intra-area paths to the same network and must select or ECMP them based on cost. Which TWO practices introduce avoidable network risk? Select TWO answers.
Explanation
Correct Answer
A router has two OSPF intra-area paths to the same network and must select or ECMP them based on cost. “Compare OSPF cost against an unrelated static route metric before administrative distance” would violate the requirement. The appropriate control instead is to compare the protocol's path metrics and choose the lower OSPF total cost, installing equal-cost paths when eligible.
A router has two OSPF intra-area paths to the same network and must select or ECMP them based on cost. “Choose the path with the largest number of routers regardless of OSPF cost” would violate the requirement. The appropriate control instead is to compare the protocol's path metrics and choose the lower OSPF total cost, installing equal-cost paths when eligible.
Incorrect Answers
“compare the protocol's path metrics and choose the lower OSPF total cost, installing equal-cost paths when eligible” is the controlled implementation, not an unsafe workaround. Confirm that routing metric ranks candidate paths learned through the same protocol; OSPF path cost is based on configured interface costs, not simply hop count.
“collect targeted evidence to inspect OSPF path costs, interface bandwidth/reference settings and the actual destination's routing entry” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that routing metric ranks candidate paths learned through the same protocol; OSPF path cost is based on configured interface costs, not simply hop count.
“confirm the repair by checking that show ip route and show ip ospf interface show the expected preferred path or eligible equal-cost next hops” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that routing metric ranks candidate paths learned through the same protocol; OSPF path cost is based on configured interface costs, not simply hop count.
Question 351
An engineer must resolve the following situation: A workstation can ping local 192.168.60.12 but not another subnet; its default gateway is configured outside its local /24. Select the most appropriate solution.
Explanation
Correct Answer
The action 'Configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.' directly addresses the ipv4 host default gateway requirement in this situation: A workstation can ping local 192.168.60.12 but not another subnet; its default gateway is configured outside its local /24. The relevant network mechanism is that a host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. A successful change should show that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN. To distinguish a genuine correction from a superficial change, inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP.
Incorrect Answers
“Delete the subnet mask and expect ARP to discover all remote networks” does not implement the control that the facts call for. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Instead, configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
“Set the default gateway to a distant destination IP in another subnet” does not implement the control that the facts call for. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Instead, configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
“Change the OSPF router ID to fix an endpoint's off-subnet gateway address” does not implement the control that the facts call for. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Instead, configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
Question 352
For the condition 'A workstation can ping local 192.168.60.12 but not another subnet; its default gateway is configured outside its local /24.' which networking principle best explains the correct solution?
Explanation
Correct Answer
A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
Incorrect Answers
“The IPv4 default route is a catch-all for destinations with no longer matching route; specific internal prefixes remain preferred” pertains to ipv4 default static route, not the deciding condition here. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. The implementation must configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
“IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate” pertains to ipv6 default route, not the deciding condition here. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. The implementation must configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
The choice “IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface” concerns ipv6 static routes; it does not resolve the stated requirement. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly.
Question 353
For this situation: A workstation can ping local 192.168.60.12 but not another subnet; its default gateway is configured outside its local /24. Which test would prove the configuration is behaving as intended?
Explanation
Correct Answer
A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN. If this test fails, inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP.
Incorrect Answers
A workstation can ping local 192.168.60.12 but not another subnet; its default gateway is configured outside its local /24. Select the most appropriate solution. The choice “show ip route displays S* 0.0.0.0/0 and an external traceroute follows the upstream, while local routes still use local interfaces” concerns ipv4 default static route; it does not resolve the stated requirement. The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
The choice “show ipv6 route shows S::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred” concerns ipv6 default route; it does not resolve the stated requirement. The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
A workstation can ping local 192.168.60.12 but not another subnet; its default gateway is configured outside its local /24. Select the most appropriate solution. The choice “show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds” concerns ipv6 static routes; it does not resolve the stated requirement. The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
Question 354
Which inspection best distinguishes the problem mechanism in this incident: A workstation can ping local 192.168.60.12 but not another subnet; its default gateway is configured outside its local /24.
Explanation
Correct Answer
The investigation 'Inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP.' examines the variables most likely to explain ipv4 host default gateway in this situation: A workstation can ping local 192.168.60.12 but not another subnet; its default gateway is configured outside its local /24. Those checks are directly tied to the behavior that a host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. The engineer can correlate this evidence with the expected outcome that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN. and decide whether to configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
Incorrect Answers
The choice “Inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity” concerns ipv6 default route; it does not resolve the stated requirement. Inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP.
The choice “Inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping” concerns ipv6 static routes; it does not resolve the stated requirement. Inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP.
The choice “Inspect show ip route 0.0.0.0, recursive next-hop reachability, upstream return routing and NAT policy” concerns ipv4 default static route; it does not resolve the stated requirement. Inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP.
Question 355
Two bad design choices are hidden in this change plan: A workstation can ping local 192.168.60.12 but not another subnet; its default gateway is configured outside its local /24. Which TWO should not be approved? Select TWO answers.
Explanation
Correct Answer
“Set the default gateway to a distant destination IP in another subnet” would violate the requirement. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly.
“Delete the subnet mask and expect ARP to discover all remote networks” would violate the requirement. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly.
Incorrect Answers
“Confirm the repair by checking that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN” adds a relevant safeguard or verification step rather than weakening the solution. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Confirm that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
“Configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet” is the controlled implementation, not an unsafe workaround. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Confirm that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
“Collect targeted evidence to inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP” adds a relevant safeguard or verification step rather than weakening the solution. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly.
Question 356
On a Cisco-based network, An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which change most directly solves the stated requirement?
Explanation
Correct Answer
A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
Incorrect Answers
On a Cisco-based network, An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. “change the OSPF router ID to fix an endpoint's off-subnet gateway address” does not implement the control that the facts call for. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Instead, configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
On a Cisco-based network, An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. “set the default gateway to a distant destination IP in another subnet” does not implement the control that the facts call for. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Instead, configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
On a Cisco-based network, An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. “delete the subnet mask and expect ARP to discover all remote networks” does not implement the control that the facts call for. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Instead, configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
Question 357
A team is reviewing the design for this case: An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. What technical behavior is decisive?
Explanation
Correct Answer
A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet. The decisive evidence is that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
Incorrect Answers
An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. “The IPv4 default route is a catch-all for destinations with no longer matching route; specific internal prefixes remain preferred” pertains to ipv4 default static route, not the deciding condition here. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. The implementation must configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
“IPv6 static routes may use globally routable next hops or interface-scoped link-local neighbors; a link-local next hop must be tied to its interface” pertains to ipv6 static routes, not the deciding condition here. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. The implementation must configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. “IPv6::/0 is the least-specific IPv6 route used only when no more-specific prefix matches; IPv4 0.0.0.0/0 is separate” pertains to ipv6 default route, not the deciding condition here. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. The implementation must configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet.
Question 358
An engineer implements a fix for 'An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1.'. Which result would conclusively validate the intended change?
Explanation
Correct Answer
An engineer implements a fix for 'An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN. If this test fails, inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP.
Incorrect Answers
An engineer implements a fix for 'An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. The choice “show ipv6 route shows S::/0 and IPv6 traceroute reaches an external destination while internal /64 routes stay preferred” concerns ipv6 default route; it does not resolve the stated requirement. The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
The choice “show ipv6 route lists the remote prefix and outbound interface, and ipv6 ping to a destination beyond the next hop succeeds” concerns ipv6 static routes; it does not resolve the stated requirement. The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
On a Cisco-based network, An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which change most directly solves the stated requirement. The choice “show ip route displays S* 0.0.0.0/0 and an external traceroute follows the upstream, while local routes still use local interfaces” concerns ipv4 default static route; it does not resolve the stated requirement. The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
Question 359
For the case 'An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1.', which targeted checks should be compared before a disruptive change?
Explanation
Correct Answer
Inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. The host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
Incorrect Answers
For the case 'An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. The choice “inspect show ipv6 route, ipv6 unicast-routing, NDP adjacency, RA default router and upstream IPv6 connectivity” concerns ipv6 default route; it does not resolve the stated requirement. Inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP.
For the case 'An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. The choice “inspect show ip route 0.0.0.0, recursive next-hop reachability, upstream return routing and NAT policy” concerns ipv4 default static route; it does not resolve the stated requirement. Inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP.
For the case 'An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. The choice “inspect show ipv6 route, show ipv6 neighbors, outgoing interface and route prefix length and test ipv6 ping” concerns ipv6 static routes; it does not resolve the stated requirement. Inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP.
Question 360
Network review: An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.
Explanation
Correct Answer
An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which TWO proposed shortcuts would be unsafe in this situation. “Set the default gateway to a distant destination IP in another subnet” would violate the requirement. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly.
An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which TWO proposed shortcuts would be unsafe in this situation. “Delete the subnet mask and expect ARP to discover all remote networks” would violate the requirement. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly.
Incorrect Answers
An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which TWO proposed shortcuts would be unsafe in this situation. “confirm the repair by checking that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN” adds a relevant safeguard or verification step rather than weakening the solution. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Confirm that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
“collect targeted evidence to inspect ipconfig, network mask, arp -a, ping gateway, VLAN membership and the router's interface IP” adds a relevant safeguard or verification step rather than weakening the solution. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Confirm that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
An IoT endpoint has address 10.22.3.25/24 yet its gateway is mistakenly set to 10.22.4.1. Which TWO proposed shortcuts would be unsafe in this situation. “configure the client's gateway to a reachable Layer 3 interface in the client's on-link IPv4 subnet” is the controlled implementation, not an unsafe workaround. A host ARPs for its on-link default gateway to send off-subnet packets; a gateway outside the local prefix cannot normally be resolved directly. Confirm that the host resolves its gateway MAC, reaches a remote network, and traceroute shows a first-hop device on the local VLAN.
Cisco Certified Network Associate (CCNA) (200-301) Practice Tests
- Cisco 200-301 Practice Test 34 - 10 Questions (Last Reviewed 15-Oct-2026)
- Cisco 200-301 Practice Test 35 - 10 Questions (Last Reviewed 14-Oct-2026)
- Cisco 200-301 Practice Test 36 - 10 Questions (Last Reviewed 13-Oct-2026)
- Cisco 200-301 Practice Test 37 - 10 Questions (Last Reviewed 12-Oct-2026)
- Cisco 200-301 Practice Test 38 - 10 Questions (Last Reviewed 11-Oct-2026)
