Cisco 200-301 Practice Test 24 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 24

Question 230

For this incident: A four-member aggregation has a native VLAN mismatch on one member interface and operates unpredictably. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this switching domain, collect targeted evidence to inspect Port-channel config, member-port switchport output, show etherchannel detail and LACP status.
  2. For this switching domain, treat an individually suspended member as proof LACP can ignore any switchport difference.
  3. For this switching domain, confirm the repair by checking that show etherchannel summary shows all intended members bundled without suspension; show interfaces trunk reports the consistent Port-channel VLAN policy.
  4. For this switching domain, configure incompatible trunk modes on members of the same bundle.
  5. For this switching domain, make speed, duplex, switchport mode, native VLAN and allowed VLAN consistent for all Port-channel members.

Explanation

Correct Answer

B:

“Treat an individually suspended member as proof LACP can ignore any switchport difference” would violate the requirement. The appropriate control instead is to make speed, duplex, switchport mode, native VLAN and allowed VLAN consistent for all Port-channel members.

D:

“Configure incompatible trunk modes on members of the same bundle” would violate the requirement. The appropriate control instead is to make speed, duplex, switchport mode, native VLAN and allowed VLAN consistent for all Port-channel members.

Incorrect Answers

A:

“collect targeted evidence to inspect Port-channel config, member-port switchport output, show etherchannel detail and LACP status” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that etherChannel requires compatible physical-port characteristics; the logical Port-channel's Layer 2 parameters must agree across its members.

C:

“confirm the repair by checking that show etherchannel summary shows all intended members bundled without suspension; show interfaces trunk reports the consistent Port-channel VLAN policy” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that etherChannel requires compatible physical-port characteristics; the logical Port-channel's Layer 2 parameters must agree across its members.

E:

“make speed, duplex, switchport mode, native VLAN and allowed VLAN consistent for all Port-channel members” is the controlled implementation, not an unsafe workaround. Confirm that etherChannel requires compatible physical-port characteristics; the logical Port-channel's Layer 2 parameters must agree across its members.

Question 231

An engineer must resolve the following situation: A low-capacity access switch unexpectedly becomes the spanning-tree root for VLAN 30. Select the most appropriate solution.

  1. Increase root-bridge priority above all access-switch priorities and expect it to win.
  2. Disable STP on every switch to eliminate root elections.
  3. Use only the highest IP address to decide STP root election.
  4. Set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

Explanation

Correct Answer

D:

The action 'Set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.' directly addresses the rapid pvst root bridge priority requirement in this situation: A low-capacity access switch unexpectedly becomes the spanning-tree root for VLAN 30. The relevant network mechanism is that the root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. A successful change should show that show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it. To distinguish a genuine correction from a superficial change, compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.

Incorrect Answers

A:

“Increase root-bridge priority above all access-switch priorities and expect it to win” does not implement the control that the facts call for. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Instead, set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

B:

“Disable STP on every switch to eliminate root elections” would not meet the requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Instead, set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

C:

“Use only the highest IP address to decide STP root election” does not implement the control that the facts call for. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Instead, set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

Question 232

For the condition 'A low-capacity access switch unexpectedly becomes the spanning-tree root for VLAN 30.' which networking principle best explains the correct solution?

  1. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.
  2. A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.
  3. CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.
  4. Enterprise WLAN security uses per-user 802.1X/EAP authentication against an AAA server; PSK shares a common secret among clients.

Explanation

Correct Answer

A:

The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election. Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

Incorrect Answers

B:

“A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping” does not fully explain the decisive technical boundary in this case. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

C:

“CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop” would not meet the requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. The implementation must set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

D:

“Enterprise WLAN security uses per-user 802.1X/EAP authentication against an AAA server; PSK shares a common secret among clients” pertains to wlan wpa2 enterprise 802, not the deciding condition here. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. The implementation must set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

Question 233

For this situation: A low-capacity access switch unexpectedly becomes the spanning-tree root for VLAN 30. Which test would prove the configuration is behaving as intended?

  1. The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.
  2. Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.
  3. A valid identity joins the SSID and obtains the authorized VLAN, while a revoked account fails with a traceable AAA result.
  4. show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

Explanation

Correct Answer

D:

A low-capacity access switch unexpectedly becomes the spanning-tree root for VLAN 30. Select the most appropriate solution. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

Incorrect Answers

A:

The choice “The associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy” concerns wlc ssid to vlan; it does not resolve the stated requirement. Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

B:

“Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling” alone does not establish all the required behavior. Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

C:

The choice “A valid identity joins the SSID and obtains the authorized VLAN, while a revoked account fails with a traceable AAA result” concerns wlan wpa2 enterprise 802; it does not resolve the stated requirement. Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

Question 234

Which inspection best distinguishes the problem mechanism in this incident: A low-capacity access switch unexpectedly becomes the spanning-tree root for VLAN 30.

  1. Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.
  2. Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk.
  3. Inspect WLC AAA server reachability, RADIUS replies, EAP method, client association and policy VLAN.
  4. Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.

Explanation

Correct Answer

D:

The investigation 'Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.' examines the variables most likely to explain rapid pvst root bridge priority in this situation: A low-capacity access switch unexpectedly becomes the spanning-tree root for VLAN 30. Those checks are directly tied to the behavior that the root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. The engineer can correlate this evidence with the expected outcome that show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it. and decide whether to set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

Incorrect Answers

A:

“Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints” would not be the most direct first check for this failure. Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.

B:

“Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk” pertains to wlc ssid to vlan, not the deciding condition here. Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

C:

“Inspect WLC AAA server reachability, RADIUS replies, EAP method, client association and policy VLAN” pertains to wlan wpa2 enterprise 802, not the deciding condition here. Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

Question 235

Two bad design choices are hidden in this change plan: A low-capacity access switch unexpectedly becomes the spanning-tree root for VLAN 30. Which TWO should not be approved? Select TWO answers.

  1. Confirm the repair by checking that show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.
  2. Use only the highest IP address to decide STP root election.
  3. Collect targeted evidence to compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.
  4. Increase root-bridge priority above all access-switch priorities and expect it to win.
  5. Set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

Explanation

Correct Answer

B:

“Use only the highest IP address to decide STP root election” would violate the requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

D:

“Increase root-bridge priority above all access-switch priorities and expect it to win” would violate the requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

Incorrect Answers

A:

“Confirm the repair by checking that show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it” adds a relevant safeguard or verification step rather than weakening the solution. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Confirm that show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

C:

“Collect targeted evidence to compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches” adds a relevant safeguard or verification step rather than weakening the solution. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

E:

“Set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election” is the controlled implementation, not an unsafe workaround. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Confirm that show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

Question 236

On a Cisco-based network, A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. Which change most directly solves the stated requirement?

  1. For this switching domain, disable STP on every switch to eliminate root elections.
  2. For this switching domain, set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.
  3. For this switching domain, use only the highest IP address to decide STP root election.
  4. For this switching domain, increase root-bridge priority above all access-switch priorities and expect it to win.

Explanation

Correct Answer

B:

The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Confirm that show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it. If the result fails, compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.

Incorrect Answers

A:

On a Cisco-based network, A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “Disable STP on every switch to eliminate root elections” would not meet the requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Instead, set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

C:

On a Cisco-based network, A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “use only the highest IP address to decide STP root election” does not implement the control that the facts call for. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Instead, set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

D:

On a Cisco-based network, A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “increase root-bridge priority above all access-switch priorities and expect it to win” does not implement the control that the facts call for. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Instead, set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

Question 237

A team is reviewing the design for this case: A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. What technical behavior is decisive?

  1. For this switching domain, enterprise WLAN security uses per-user 802.1X/EAP authentication against an AAA server; PSK shares a common secret among clients.
  2. For this switching domain, a WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping.
  3. For this switching domain, cDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop.
  4. For this switching domain, the root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

Explanation

Correct Answer

D:

The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.

Incorrect Answers

A:

The choice “enterprise WLAN security uses per-user 802.1X/EAP authentication against an AAA server; PSK shares a common secret among clients” concerns wlan wpa2 enterprise 802; it does not resolve the stated requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

B:

A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “A WLAN SSID is associated with security and policy settings, including the client VLAN; the RF beacon alone does not establish correct data-path mapping” does not fully explain the decisive technical boundary in this case. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

C:

“CDP and LLDP advertise directly connected device and port identity at Layer 2; they do not discover every routed hop” would not meet the requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

Question 238

An engineer implements a fix for 'A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address.'. Which result would conclusively validate the intended change?

  1. For this switching domain, a valid identity joins the SSID and obtains the authorized VLAN, while a revoked account fails with a traceable AAA result.
  2. For this switching domain, the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy.
  3. For this switching domain, neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling.
  4. For this switching domain, show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

Explanation

Correct Answer

D:

On a Cisco-based network, A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. Which change most directly solves the stated requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

Incorrect Answers

A:

An engineer implements a fix for 'A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. The choice “a valid identity joins the SSID and obtains the authorized VLAN, while a revoked account fails with a traceable AAA result” concerns wlan wpa2 enterprise 802; it does not resolve the stated requirement. Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

B:

An engineer implements a fix for 'A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. The choice “the associated client receives an address from the corporate VLAN and can access only authorized services; WLC client details show intended policy” concerns wlc ssid to vlan; it does not resolve the stated requirement. Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

C:

An engineer implements a fix for 'A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “Neighbor output maps local ports to expected device IDs and remote port IDs, matching physically traced cabling” alone does not establish all the required behavior. Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

Question 239

For the case 'A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address.', which targeted checks should be compared before a disruptive change?

  1. For this switching domain, inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk.
  2. For this switching domain, inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints.
  3. For this switching domain, inspect WLC AAA server reachability, RADIUS replies, EAP method, client association and policy VLAN.
  4. For this switching domain, compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.

Explanation

Correct Answer

D:

Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC. Show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.

Incorrect Answers

A:

For the case 'A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “Inspect WLC WLAN and policy profile mappings, client VLAN, SSID state, DHCP relay and access-interface trunk” pertains to wlc ssid to vlan, not the deciding condition here. Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

B:

“Inspect show cdp neighbors detail or show lldp neighbors detail and verify discovery is enabled on both endpoints” would not be the most direct first check for this failure. Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

C:

For the case 'A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “Inspect WLC AAA server reachability, RADIUS replies, EAP method, client association and policy VLAN” pertains to wlan wpa2 enterprise 802, not the deciding condition here. Compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

Question 240

Network review: A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this switching domain, set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election.
  2. For this switching domain, confirm the repair by checking that show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it.
  3. For this switching domain, increase root-bridge priority above all access-switch priorities and expect it to win.
  4. For this switching domain, collect targeted evidence to compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches.
  5. For this switching domain, use only the highest IP address to decide STP root election.

Explanation

Correct Answer

C:

A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “Increase root-bridge priority above all access-switch priorities and expect it to win” would violate the requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

E:

A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “Use only the highest IP address to decide STP root election” would violate the requirement. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

Incorrect Answers

A:

“set the preferred root switch to a lower STP bridge priority for the relevant VLAN and verify election” is the controlled implementation, not an unsafe workaround. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

B:

“confirm the repair by checking that show spanning-tree vlan 30 reports the intended root ID at distribution, and access switches have root ports pointing toward it” adds a relevant safeguard or verification step rather than weakening the solution. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

D:

A campus wants a core distribution switch to be the deterministic root rather than an arbitrary access switch MAC address. “collect targeted evidence to compare bridge priority, bridge MAC, root ID and port roles in show spanning-tree vlan 30 across switches” adds a relevant safeguard or verification step rather than weakening the solution. The root bridge is selected by the lowest bridge ID, consisting of priority and MAC address; equal priorities break ties by MAC.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests