Pass Juniper JN0-364 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Juniper JN0-364 Practice Test 8
Question 70
A fictional Junos service-provider engineer encounters this scenario: Two Junos aggregation routers exchange IP packets but their OSPF adjacency never advances after an automated timer rollout. Distinguishing evidence: OSPF neighbor and interface details reveal different hello and dead intervals on the directly connected segment even though addresses and area are aligned. Which bounded approval scope avoids unintended changes to other provider or customer services?
Answer and Explanation
Correct Answer: D
Another proposed approval would approve only the bounded change (Apply a precise export filter and route-policy tests for public prefixes, then confirm rejected customer-only routes stay internal.) after independently checking (Upstream advertised-route output contains only approved prefixes and the private customer destination remains available in its intended instance.), without quietly widening the provider or customer network scope. The present scope must instead be justified by OSPF neighbor and interface details reveal different hello and dead intervals on the directly connected segment even though addresses and area are aligned.
A separate release decision would approve only the bounded change (Validate the inter-router interface, area design and active configuration, then align the intended area membership under the appropriate OSPF instance.) after independently checking (Both routers progress to the expected full adjacency and the correct link-state routes appear without shifting unrelated interfaces into area zero.), without quietly widening the provider or customer network scope. It does not match the current change: Check approved liveness requirements and align the interface hello and dead parameters on both adjacent devices before committing.
An alternative approval would approve only the bounded change (Compare link-state database reachability with route calculation, preference and active forwarding selection before modifying advertisement filters.) after independently checking (Database entries and active route selection are explainable, and probes follow the intended next hop without falsely requiring every LSA to be an active route.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are OSPF neighbor and interface details reveal different hello and dead intervals on the directly connected segment even though addresses and area are aligned and the neighbor remains full through several monitored intervals, while routing reconverges predictably on a controlled link loss, respectively.
The change-control boundary is: Approve only the bounded change (Check approved liveness requirements and align the interface hello and dead parameters on both adjacent devices before committing.) after independently checking (The neighbor remains full through several monitored intervals, while routing reconverges predictably on a controlled link loss.), without quietly widening the provider or customer network scope. The evidence for this scope is OSPF neighbor and interface details reveal different hello and dead intervals on the directly connected segment even though addresses and area are aligned.
Question 71
A fictional Junos service-provider engineer encounters this scenario: A provider engineer expects a new low-priority OSPF router to become designated router on a broadcast VLAN and reports a fault when it forms only partial adjacencies with other non-DR routers. Distinguishing evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. Which specific bounded Junos routing or switching correction best addresses this service-provider issue?
Answer and Explanation
Correct Answer: D
Another proposed action is: Review the OSPF export policy and prefix scope, then explicitly permit only the approved external destination while preserving other route exclusions. That does not directly address the observed condition: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. The more targeted correction is: Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior.
Another proposed action is: Validate the inter-router interface, area design and active configuration, then align the intended area membership under the appropriate OSPF instance. It targets a different dependency; the evidence here is the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
Another option proposes: Inspect the forwarding-table next hops and the Junos load-balancing policy, then measure multiple independent flows and validate the intended per-flow distribution. The specific correction is: Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior. The deciding evidence is: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
The evidence is the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. The relevant principle is that OSPF broadcast networks use DR and BDR election to reduce adjacency overhead. The correction is: Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior. The separate success check is: The observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies.
Question 72
A fictional Junos service-provider engineer encounters this scenario: A provider engineer expects a new low-priority OSPF router to become designated router on a broadcast VLAN and reports a fault when it forms only partial adjacencies with other non-DR routers. Which observed operational evidence most strongly isolates the actual protocol or forwarding condition?
Answer and Explanation
Correct Answer: A
Consider this evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. The applicable explanation is: OSPF broadcast networks use DR and BDR election to reduce adjacency overhead. The matching response is: Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior.
Another alternative would address Reflector peer listings show one intended client configured as an ordinary peer and the route advertisements lack the expected client reflection behavior as decisive. The actual evidence in this case is the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
This other option describes: OSPF neighbor and interface details reveal different hello and dead intervals on the directly connected segment even though addresses and area are aligned. The problem to explain is different: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
Another proposed finding is: Routing instance views show the source prefix active, while OSPF export policy counters show its attributes failing the allowed route term. It is not the recorded discriminator, which is the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
Question 73
A fictional Junos service-provider engineer encounters this scenario: A provider engineer expects a new low-priority OSPF router to become designated router on a broadcast VLAN and reports a fault when it forms only partial adjacencies with other non-DR routers. Distinguishing evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. Which Junos networking principle best explains the relevant engineering decision?
Answer and Explanation
Correct Answer: A
OSPF broadcast networks use DR and BDR election to reduce adjacency overhead. The recorded evidence is: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. The corresponding action is: Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior.
This alternative invokes: Matching OSPF area membership is necessary for eligible routers to establish the intended adjacency. Evidence for this case: Interface-level OSPF inspection shows the local circuit attached to area 0.0.0.1 while the peer expects area 0.0.0.0 on the same numbered link. The governing distinction for the recorded case is OSPF broadcast networks use DR and BDR election to reduce adjacency overhead.
The competing option invokes: Filter-based forwarding changes packet forwarding based on matched ingress policy, not merely destination route preference. Evidence for this case: The firewall filter counter rises on a broad term that matches management subnet packets along with the intended customer source prefix. The present evidence is: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. The case-relevant principle is: OSPF broadcast networks use DR and BDR election to reduce adjacency overhead.
That principle concerns another fact pattern: Protocol troubleshooting must use the correct routing-instance and route-table context. Evidence for this case: The script performs route and ping checks in the default table while the customer interface and its OSPF learned routes live in an isolated routing instance. Here the key fact is: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
Question 74
A fictional Junos service-provider engineer encounters this scenario: A provider engineer expects a new low-priority OSPF router to become designated router on a broadcast VLAN and reports a fault when it forms only partial adjacencies with other non-DR routers. Intended bounded correction: Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior. Which independently verifiable test best demonstrates the intended correction worked?
Answer and Explanation
Correct Answer: D
That result would assess another condition: Route displays and sourced tests from the correct instance explain end-to-end reachability and isolate the false default-table alarm. The correct criterion is directly linked to the finding: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
Another proposed result is: Representative destinations use the intended ring path and link utilization remains within the approved operational envelope. It would not independently establish the required outcome: The observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies.
A different option checks: Neighbor route views receive the approved external prefix and unrelated tenant networks remain unadvertised. The case-specific acceptance condition is instead the observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies.
The independent verification condition is: The observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies. That result checks whether the original evidence—the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers—has been addressed.
Question 75
A fictional Junos service-provider engineer encounters this scenario: A provider engineer expects a new low-priority OSPF router to become designated router on a broadcast VLAN and reports a fault when it forms only partial adjacencies with other non-DR routers. Distinguishing evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. Which material service-availability, routing, switching or security risk most directly needs control?
Answer and Explanation
Correct Answer: C
Another emphasis concerns: Debugging only the global table can prompt unintended configuration changes to an otherwise healthy customer VPN. The current change is Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior; the material limitation is Treating expected two-way neighbor states as faults can trigger unnecessary election changes and route churn.
This limitation concerns another setting: Assuming every IS-IS LSP attribute populates every family can misdirect troubleshooting and policy changes. The observed facts here make a different caution decisive: Treating expected two-way neighbor states as faults can trigger unnecessary election changes and route churn.
The relevant boundary is: Treating expected two-way neighbor states as faults can trigger unnecessary election changes and route churn. It matters when applying the specific response: Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior.
Another emphasis concerns: Globally modifying OSPF area design to fix one mismatched interface can disrupt a wider provider routing domain. The current change is Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior; the material limitation is Treating expected two-way neighbor states as faults can trigger unnecessary election changes and route churn.
Question 76
A fictional Junos service-provider engineer encounters this scenario: A provider engineer expects a new low-priority OSPF router to become designated router on a broadcast VLAN and reports a fault when it forms only partial adjacencies with other non-DR routers. Distinguishing evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. Which focused investigation is the most useful before modifying the network configuration?
Answer and Explanation
Correct Answer: A
The focused investigation should compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. It is tied to the observed evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. It tests the conditions for this response: Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior.
Another investigation would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Routing instance views show the source prefix active, while OSPF export policy counters show its attributes failing the allowed route term. It does not directly establish the reported condition: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
That check concerns a different signal: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: OSPF database output includes relevant link-state information, whereas the active route table prefers a more specific or otherwise preferred competing route for the destination. The case-relevant check is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
Another check would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Level-specific database comparisons show an expected peer LSP missing or stale while adjacency counters remain stable and reachable next hops persist. The case observation to isolate is the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. The focused check here is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
Question 77
A fictional Junos service-provider engineer encounters this scenario: A provider engineer expects a new low-priority OSPF router to become designated router on a broadcast VLAN and reports a fault when it forms only partial adjacencies with other non-DR routers. Distinguishing evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. Which controlled operational implementation sequence best protects the related provider service?
Answer and Explanation
Correct Answer: C
Another action-and-check pairing is: First verify the observed failure (OSPF database output includes relevant link-state information, whereas the active route table prefers a more specific or otherwise preferred competing route for the destination.); review and authorize the bounded correction (Compare link-state database reachability with route calculation, preference and active forwarding selection before modifying advertisement filters.); then independently verify the intended outcome (Database entries and active route selection are explainable, and probes follow the intended next hop without falsely requiring every LSA to be an active route.) before production rollout. The evidence here is the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. The required action and proof are Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior and the observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies.
An alternative plan is: First verify the observed failure (Interface-level OSPF inspection shows the local circuit attached to area 0.0.0.1 while the peer expects area 0.0.0.0 on the same numbered link.); review and authorize the bounded correction (Validate the inter-router interface, area design and active configuration, then align the intended area membership under the appropriate OSPF instance.); then independently verify the intended outcome (Both routers progress to the expected full adjacency and the correct link-state routes appear without shifting unrelated interfaces into area zero.) before production rollout. It does not test the case-specific condition: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
OSPF broadcast networks use DR and BDR election to reduce adjacency overhead. For this issue, the appropriate bounded intervention is: Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior. The acceptance test is: The observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies.
Another potential sequence is: First verify the observed failure (The neighboring router advertises a different source address from the one in the local configured BGP neighbor statement and logs show connection attempts to the obsolete IP.); review and authorize the bounded correction (Verify peering transport addresses, configured peer ASN, reachability and authentication, then correct only the approved BGP neighbor endpoint.); then independently verify the intended outcome (The expected external session reaches Established and exchanges only agreed IPv4 routes with stable uptime.) before production rollout. It has no direct link to the distinguishing evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
Question 78
A fictional Junos service-provider engineer encounters this scenario: A provider engineer expects a new low-priority OSPF router to become designated router on a broadcast VLAN and reports a fault when it forms only partial adjacencies with other non-DR routers. Distinguishing evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. Which set of evidence, limited change and independent validation best justifies authorization?
Answer and Explanation
Correct Answer: A
The approval decision should consider the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. The specific proposal is: Observed evidence (The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.), limited correction (Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior.), independently measurable result (The observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies.). Its measurable outcome is: The observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies.
Another approval action is: Observed evidence (IS-IS topology output reflects the new interface cost and SPF paths differ, while link utilization counters align with the changed shortest path.), limited correction (Compare level-specific route metrics and approved traffic-engineering intent, then restore or adjust the scoped metric with a measured failover plan.), independently measurable result (Representative destinations use the intended ring path and link utilization remains within the approved operational envelope.). The relevant evidence and acceptance are the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers and the observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies, respectively.
Another approval package concerns: Observed evidence (The script performs route and ping checks in the default table while the customer interface and its OSPF learned routes live in an isolated routing instance.), limited correction (Repeat routing and operational tests explicitly in the correct customer instance and investigate any actual gap without changing global routing.), independently measurable result (Route displays and sourced tests from the correct instance explain end-to-end reachability and isolate the false default-table alarm.). The present scope must instead be justified by the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
An alternative release decision is: Observed evidence (OSPF database output includes relevant link-state information, whereas the active route table prefers a more specific or otherwise preferred competing route for the destination.), limited correction (Compare link-state database reachability with route calculation, preference and active forwarding selection before modifying advertisement filters.), independently measurable result (Database entries and active route selection are explainable, and probes follow the intended next hop without falsely requiring every LSA to be an active route.). It does not match the current change: Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior.
Question 79
A fictional Junos service-provider engineer encounters this scenario: A provider engineer expects a new low-priority OSPF router to become designated router on a broadcast VLAN and reports a fault when it forms only partial adjacencies with other non-DR routers. Distinguishing evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. If the change fails its expected acceptance test, which controlled recovery approach is most appropriate?
Answer and Explanation
Correct Answer: C
Another recovery route would pause changes, preserve the differentiating evidence (Received-route visibility shows the customer prefix, while the import policy match excludes its approved prefix length and the RIB lacks the route.), restore the last approved safe network state and reassess bgp route is received but not imported by policy. It does not preserve the condition of this case: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. The bounded fallback is: Pause changes, preserve the differentiating evidence (The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.), restore the last approved safe network state and reassess dr and bdr expectations are confused on shared ethernet.
Another option proposes: Pause changes, preserve the differentiating evidence (Interface-level OSPF inspection shows the local circuit attached to area 0.0.0.1 while the peer expects area 0.0.0.0 on the same numbered link.), restore the last approved safe network state and reassess area mismatch prevents a core ospf neighbor from forming. Its assumptions differ from the observed failure; the appropriate recovery is: Pause changes, preserve the differentiating evidence (The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.), restore the last approved safe network state and reassess dr and bdr expectations are confused on shared ethernet.
A recovery option is to pause changes, preserve the differentiating evidence (The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.), restore the last approved safe network state and reassess dr and bdr expectations are confused on shared ethernet. The intended change was Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior, and acceptance must still be judged against the observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies.
Another recovery route would pause changes, preserve the differentiating evidence (The script performs route and ping checks in the default table while the customer interface and its OSPF learned routes live in an isolated routing instance.), restore the last approved safe network state and reassess routing-instance ospf diagnostic probes point at the wrong table. It does not preserve the condition of this case: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. The bounded fallback is: Pause changes, preserve the differentiating evidence (The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.), restore the last approved safe network state and reassess dr and bdr expectations are confused on shared ethernet.
Question 80
A fictional Junos service-provider engineer encounters this scenario: A provider engineer expects a new low-priority OSPF router to become designated router on a broadcast VLAN and reports a fault when it forms only partial adjacencies with other non-DR routers. Distinguishing evidence: The interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers. Which bounded approval scope avoids unintended changes to other provider or customer services?
Answer and Explanation
Correct Answer: C
An alternative approval would approve only the bounded change (Review the OSPF export policy and prefix scope, then explicitly permit only the approved external destination while preserving other route exclusions.) after independently checking (Neighbor route views receive the approved external prefix and unrelated tenant networks remain unadvertised.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers and the observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies, respectively.
Another proposed approval would approve only the bounded change (Compare link-state database reachability with route calculation, preference and active forwarding selection before modifying advertisement filters.) after independently checking (Database entries and active route selection are explainable, and probes follow the intended next hop without falsely requiring every LSA to be an active route.), without quietly widening the provider or customer network scope. The present scope must instead be justified by the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
The change-control boundary is: Approve only the bounded change (Inspect the broadcast network type, priorities and DR election state before changing any OSPF settings; document expected adjacency behavior.) after independently checking (The observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies.), without quietly widening the provider or customer network scope. The evidence for this scope is the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers.
An alternative approval would approve only the bounded change (Inspect the advertised address-family-specific TLVs and corresponding IPv6 routing table and interface support before changing IS-IS policy.) after independently checking (Both route-family displays match their advertised TLV data and IPv6 next-hop reachability is verified separately.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are the interface is a broadcast multiaccess network with elected DR and BDR and the newcomer has low priority; neighbor output shows full adjacency to elected routers and the observed DR and BDR remain legitimate and all routers learn correct routes without forcing unnecessary full mesh adjacencies, respectively.
Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests
- Juniper JN0-364 Practice Test 6 - 10 Questions (Last Reviewed 13-Nov-2026)
- Juniper JN0-364 Practice Test 7 - 10 Questions (Last Reviewed 12-Nov-2026)
- Juniper JN0-364 Practice Test 8 - 10 Questions (Last Reviewed 11-Nov-2026)
- Juniper JN0-364 Practice Test 9 - 10 Questions (Last Reviewed 10-Nov-2026)
- Juniper JN0-364 Practice Test 10 - 10 Questions (Last Reviewed 09-Nov-2026)