Pass Juniper JN0-364 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Juniper JN0-364 Practice Test 48
Question 470
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Distinguishing evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. Which bounded approval scope avoids unintended changes to other provider or customer services?
Answer and Explanation
Correct Answer: D
An alternative approval would approve only the bounded change (Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.) after independently checking (All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design and BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence, respectively.
Another proposed approval would approve only the bounded change (Repeat routing and operational tests explicitly in the correct customer instance and investigate any actual gap without changing global routing.) after independently checking (Route displays and sourced tests from the correct instance explain end-to-end reachability and isolate the false default-table alarm.), without quietly widening the provider or customer network scope. The present scope must instead be justified by BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
A separate release decision would approve only the bounded change (Distinguish GR, GRES and NSR supported roles, verify actual chassis and protocol prerequisites and use only approved continuity techniques for the planned event.) after independently checking (A sandbox or maintenance test measures the agreed forwarding and neighbor behavior for each configured redundancy feature before production rollout.), without quietly widening the provider or customer network scope. It does not match the current change: Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.
The bounded proposal is: Approve only the bounded change (Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.) after independently checking (BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.), without quietly widening the provider or customer network scope. The separate acceptance measure remains: BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.
Question 471
A fictional Junos service-provider engineer encounters this scenario: A service provider aggregates four Ethernet members but customer traffic intermittently hashes onto one member that has an incompatible physical or LACP state. Distinguishing evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. Which specific bounded Junos routing or switching correction best addresses this service-provider issue?
Answer and Explanation
Correct Answer: A
The issue turns on Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. The relevant rule is that Link aggregation requires coordinated member state and actual forwarding validation across the bundle. The targeted correction is: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.
Another proposed action is: Review VRRP advertisement, tracking and preemption conditions, then restore the documented gateway active-standby policy without forcing an untested outage. It targets a different dependency; the evidence here is Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Another option proposes: Validate the configured tunnel source and remote destination against the active underlay address and route, then update the scoped endpoints. The specific correction is: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy. The deciding evidence is: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
That alternative concerns: Distinguish GR, GRES and NSR supported roles, verify actual chassis and protocol prerequisites and use only approved continuity techniques for the planned event. The relevant evidence is Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. The corresponding fix is: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.
Question 472
A fictional Junos service-provider engineer encounters this scenario: A service provider aggregates four Ethernet members but customer traffic intermittently hashes onto one member that has an incompatible physical or LACP state. Which observed operational evidence most strongly isolates the actual protocol or forwarding condition?
Answer and Explanation
Correct Answer: B
Another piece of evidence concerns Route inspection shows several tenant networks imported into a shared routing table through a broad RIB group rather than the single approved resolver route. The current incident instead shows: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. This distinction supports the action: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.
The deciding evidence is: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. This distinguishes the problem because Link aggregation requires coordinated member state and actual forwarding validation across the bundle. The response it supports is: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.
This other option describes: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The problem to explain is different: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Another proposed finding is: VRRP state displays show changed effective priorities, interface tracking, or configured preemption behavior that differs from the approved failback design. It is not the recorded discriminator, which is Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Question 473
A fictional Junos service-provider engineer encounters this scenario: A service provider aggregates four Ethernet members but customer traffic intermittently hashes onto one member that has an incompatible physical or LACP state. Distinguishing evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. Which Junos networking principle best explains the relevant engineering decision?
Answer and Explanation
Correct Answer: B
A different principle is: BFD offers fast fault detection but detection intervals must reflect path and platform processing behavior. Evidence for this case: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The present evidence, however, is Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. The relevant rule is: Link aggregation requires coordinated member state and actual forwarding validation across the bundle.
The relevant principle is: Link aggregation requires coordinated member state and actual forwarding validation across the bundle. The case evidence is Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. The practical response is: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.
The competing option invokes: The tunnel transport endpoint route must not depend recursively on the same tunnel it enables. Evidence for this case: The route to the GRE remote destination shows the tunnel itself as next hop instead of an ordinary physical underlay path, and decapsulation counters stop increasing. The present evidence is: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. The case-relevant principle is: Link aggregation requires coordinated member state and actual forwarding validation across the bundle.
That principle concerns another fact pattern: GR, GRES and NSR address different aspects of routing and Routing Engine continuity and must be separately verified. Evidence for this case: Change review shows graceful restart configured but NSR or other high-availability capabilities absent and a test exposes a temporary control-plane adjacency resynchronization. Here the key fact is: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Question 474
A fictional Junos service-provider engineer encounters this scenario: A service provider aggregates four Ethernet members but customer traffic intermittently hashes onto one member that has an incompatible physical or LACP state. Intended bounded correction: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy. Which independently verifiable test best demonstrates the intended correction worked?
Answer and Explanation
Correct Answer: C
That result would assess another condition: Large and small customer test packets pass the tunnel with no fragmentation-related blackholing and filter policy remains appropriately scoped. The correct criterion is directly linked to the finding: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Another proposed result is: BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence. It would not independently establish the required outcome: All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss.
The expected outcome is All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss. It links the scoped action to the documented condition: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Passing that test would not establish resolution of the stated issue. The relevant proof is: All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss.
Question 475
A fictional Junos service-provider engineer encounters this scenario: A service provider aggregates four Ethernet members but customer traffic intermittently hashes onto one member that has an incompatible physical or LACP state. Distinguishing evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. Which material service-availability, routing, switching or security risk most directly needs control?
Answer and Explanation
Correct Answer: B
Another caution is: A syntactically valid summary can conceal an unreachable constituent when operators rely only on control-plane advertisement. The key risk in this case is: Adding capacity without correcting a faulty member can conceal a persistent blackhole for hashed customer flows.
A necessary safeguard is: Adding capacity without correcting a faulty member can conceal a persistent blackhole for hashed customer flows. The proposed correction remains: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.
This limitation concerns another setting: Conflating distinct high-availability features can make unsupported hitless-upgrade promises and lead to unexpected service loss. The observed facts here make a different caution decisive: Adding capacity without correcting a faulty member can conceal a persistent blackhole for hashed customer flows.
Another caution is: Assuming the presence of two Routing Engines guarantees hitless switchover can cause avoidable outage. The key risk in this case is: Adding capacity without correcting a faulty member can conceal a persistent blackhole for hashed customer flows.
Question 476
A fictional Junos service-provider engineer encounters this scenario: A service provider aggregates four Ethernet members but customer traffic intermittently hashes onto one member that has an incompatible physical or LACP state. Distinguishing evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. Which focused investigation is the most useful before modifying the network configuration?
Answer and Explanation
Correct Answer: A
The pre-change check should compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. That check directly concerns Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Another check would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: BGP announcements still include the aggregate prefix but the route table no longer contains the former constituent access path and a probe to that branch fails. The case observation to isolate is Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. The focused check here is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Another investigation would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed. It does not directly establish the reported condition: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
That check concerns a different signal: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The case-relevant check is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Question 477
A fictional Junos service-provider engineer encounters this scenario: A service provider aggregates four Ethernet members but customer traffic intermittently hashes onto one member that has an incompatible physical or LACP state. Distinguishing evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. Which controlled operational implementation sequence best protects the related provider service?
Answer and Explanation
Correct Answer: A
The case evidence indicates: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. Apply the scoped action: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy. Confirm its effect independently: All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss.
An alternative plan is: First verify the observed failure (High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed.); review and authorize the bounded correction (Check GRES prerequisites, chassis versions and redundancy synchronization before authorizing a controlled Routing Engine switchover.); then independently verify the intended outcome (Redundancy status becomes ready and the approved test preserves operational interface state within documented continuity targets.) before production rollout. It does not test the case-specific condition: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Another possible combination is: First verify the observed failure (BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.); review and authorize the bounded correction (Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.); then independently verify the intended outcome (BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.) before production rollout. The current record instead supports Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy, verified by All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss.
Another potential sequence is: First verify the observed failure (Underlay connectivity works and GRE endpoints match, yet packet captures show oversized encapsulated traffic and path MTU feedback being dropped by a filter.); review and authorize the bounded correction (Assess encapsulation overhead and actual path MTU, permit needed diagnostics and apply the approved size or MSS treatment without indiscriminately disabling controls.); then independently verify the intended outcome (Large and small customer test packets pass the tunnel with no fragmentation-related blackholing and filter policy remains appropriately scoped.) before production rollout. It has no direct link to the distinguishing evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Question 478
A fictional Junos service-provider engineer encounters this scenario: A service provider aggregates four Ethernet members but customer traffic intermittently hashes onto one member that has an incompatible physical or LACP state. Distinguishing evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. Which set of evidence, limited change and independent validation best justifies authorization?
Answer and Explanation
Correct Answer: D
Another approval package concerns: Observed evidence (The routing table shows the configured static prefix with an unresolved next-hop state while the new transit interface has a different active adjacency and reachable gateway.), limited correction (Correct the static next-hop resolution against the verified active transit gateway and confirm the candidate configuration before committing the narrow change.), independently measurable result (A controlled upstream failure and recovery shows the expected active route only while its resolved next hop is reachable and service probes succeed.). The present scope must instead be justified by Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
An alternative release decision is: Observed evidence (VRRP state displays show changed effective priorities, interface tracking, or configured preemption behavior that differs from the approved failback design.), limited correction (Review VRRP advertisement, tracking and preemption conditions, then restore the documented gateway active-standby policy without forcing an untested outage.), independently measurable result (Controlled primary failure and recovery show a predictable gateway master role and preserved host connectivity.). It does not match the current change: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.
Another approval action is: Observed evidence (BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.), limited correction (Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.), independently measurable result (BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.). The relevant evidence and acceptance are Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors and All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss, respectively.
The change-control boundary is: Observed evidence (Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.), limited correction (Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.), independently measurable result (All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss.). The evidence for this scope is Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Question 479
A fictional Junos service-provider engineer encounters this scenario: A service provider aggregates four Ethernet members but customer traffic intermittently hashes onto one member that has an incompatible physical or LACP state. Distinguishing evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. If the change fails its expected acceptance test, which controlled recovery approach is most appropriate?
Answer and Explanation
Correct Answer: D
Another fallback concerns pausing changes, preserve the differentiating evidence (VRRP state displays show changed effective priorities, interface tracking, or configured preemption behavior that differs from the approved failback design.), restore the last approved safe network state and reassess vrrp backup becomes master after an expected preemption check. The current change concerns Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Another recovery route would pause changes, preserve the differentiating evidence (High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed.), restore the last approved safe network state and reassess dual routing engine gres state is not synchronized. It does not preserve the condition of this case: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. The bounded fallback is: Pause changes, preserve the differentiating evidence (Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.), restore the last approved safe network state and reassess lag uses one incorrect member and causes intermittent packet loss.
Another option proposes: Pause changes, preserve the differentiating evidence (Interface-level OSPF inspection shows the local circuit attached to area 0.0.0.1 while the peer expects area 0.0.0.0 on the same numbered link.), restore the last approved safe network state and reassess area mismatch prevents a core ospf neighbor from forming. Its assumptions differ from the observed failure; the appropriate recovery is: Pause changes, preserve the differentiating evidence (Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.), restore the last approved safe network state and reassess lag uses one incorrect member and causes intermittent packet loss.
A contingency plan would pause changes, preserve the differentiating evidence (Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.), restore the last approved safe network state and reassess lag uses one incorrect member and causes intermittent packet loss. This preserves control of the change linked to Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
Question 480
A fictional Junos service-provider engineer encounters this scenario: A service provider aggregates four Ethernet members but customer traffic intermittently hashes onto one member that has an incompatible physical or LACP state. Distinguishing evidence: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. Which bounded approval scope avoids unintended changes to other provider or customer services?
Answer and Explanation
Correct Answer: A
The approval decision should consider Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. The specific proposal is: Approve only the bounded change (Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.) after independently checking (All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss.), without quietly widening the provider or customer network scope. Its measurable outcome is: All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss.
An alternative approval would approve only the bounded change (Correct the static next-hop resolution against the verified active transit gateway and confirm the candidate configuration before committing the narrow change.) after independently checking (A controlled upstream failure and recovery shows the expected active route only while its resolved next hop is reachable and service probes succeed.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors and All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss, respectively.
Another proposed approval would approve only the bounded change (Distinguish GR, GRES and NSR supported roles, verify actual chassis and protocol prerequisites and use only approved continuity techniques for the planned event.) after independently checking (A sandbox or maintenance test measures the agreed forwarding and neighbor behavior for each configured redundancy feature before production rollout.), without quietly widening the provider or customer network scope. The present scope must instead be justified by Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors.
A separate release decision would approve only the bounded change (Review VRRP advertisement, tracking and preemption conditions, then restore the documented gateway active-standby policy without forcing an untested outage.) after independently checking (Controlled primary failure and recovery show a predictable gateway master role and preserved host connectivity.), without quietly widening the provider or customer network scope. It does not match the current change: Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.
Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests
- Juniper JN0-364 Practice Test 46 - 10 Questions (Last Reviewed 04-Oct-2026)
- Juniper JN0-364 Practice Test 47 - 10 Questions (Last Reviewed 03-Oct-2026)
- Juniper JN0-364 Practice Test 48 - 10 Questions (Last Reviewed 02-Oct-2026)
- Juniper JN0-364 Practice Test 49 - 10 Questions (Last Reviewed 01-Oct-2026)
- Juniper JN0-364 Practice Test 50 - 10 Questions (Last Reviewed 30-Sep-2026)