Pass Juniper JN0-364 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Juniper JN0-364 Practice Test 47
Question 460
A fictional Junos service-provider engineer encounters this scenario: A provider core chassis reports a backup Routing Engine ready after a software upgrade, but a planned switchover would lose critical interface state continuity. Distinguishing evidence: High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed. Which bounded approval scope avoids unintended changes to other provider or customer services?
Answer and Explanation
Correct Answer: D
Another proposed approval would approve only the bounded change (Validate the inter-router interface, area design and active configuration, then align the intended area membership under the appropriate OSPF instance.) after independently checking (Both routers progress to the expected full adjacency and the correct link-state routes appear without shifting unrelated interfaces into area zero.), without quietly widening the provider or customer network scope. The present scope must instead be justified by High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed.
A separate release decision would approve only the bounded change (Review VRRP advertisement, tracking and preemption conditions, then restore the documented gateway active-standby policy without forcing an untested outage.) after independently checking (Controlled primary failure and recovery show a predictable gateway master role and preserved host connectivity.), without quietly widening the provider or customer network scope. It does not match the current change: Check GRES prerequisites, chassis versions and redundancy synchronization before authorizing a controlled Routing Engine switchover.
An alternative approval would approve only the bounded change (Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.) after independently checking (BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed and Redundancy status becomes ready and the approved test preserves operational interface state within documented continuity targets, respectively.
The change-control boundary is: Approve only the bounded change (Check GRES prerequisites, chassis versions and redundancy synchronization before authorizing a controlled Routing Engine switchover.) after independently checking (Redundancy status becomes ready and the approved test preserves operational interface state within documented continuity targets.), without quietly widening the provider or customer network scope. The evidence for this scope is High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed.
Question 461
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Distinguishing evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. Which specific bounded Junos routing or switching correction best addresses this service-provider issue?
Answer and Explanation
Correct Answer: A
BFD timer mismatch produces frequent false failure detection. The decisive observation is BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The proposed fix is: Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior. An observable result is: BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.
Another proposed action is: Review VRRP advertisement, tracking and preemption conditions, then restore the documented gateway active-standby policy without forcing an untested outage. It targets a different dependency; the evidence here is BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
Another option proposes: Distinguish GR, GRES and NSR supported roles, verify actual chassis and protocol prerequisites and use only approved continuity techniques for the planned event. The specific correction is: Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior. The deciding evidence is: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
That alternative concerns: Check approved liveness requirements and align the interface hello and dead parameters on both adjacent devices before committing. The relevant evidence is BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The corresponding fix is: Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.
Question 462
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Which observed operational evidence most strongly isolates the actual protocol or forwarding condition?
Answer and Explanation
Correct Answer: D
This other option describes: Routing instance views show the source prefix active, while OSPF export policy counters show its attributes failing the allowed route term. The problem to explain is different: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
Another proposed finding is: High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed. It is not the recorded discriminator, which is BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
Another piece of evidence concerns Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. The current incident instead shows: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. This distinction supports the action: Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.
The deciding evidence is: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. This distinguishes the problem because BFD offers fast fault detection but detection intervals must reflect path and platform processing behavior. The response it supports is: Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.
Question 463
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Distinguishing evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. Which Junos networking principle best explains the relevant engineering decision?
Answer and Explanation
Correct Answer: B
The competing option invokes: Matching OSPF area membership is necessary for eligible routers to establish the intended adjacency. Evidence for this case: Interface-level OSPF inspection shows the local circuit attached to area 0.0.0.1 while the peer expects area 0.0.0.0 on the same numbered link. The present evidence is: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The case-relevant principle is: BFD offers fast fault detection but detection intervals must reflect path and platform processing behavior.
BFD offers fast fault detection but detection intervals must reflect path and platform processing behavior. This distinction accounts for BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design; another unrelated mechanism would not address the same condition.
A different principle is: Link aggregation requires coordinated member state and actual forwarding validation across the bundle. Evidence for this case: Interface bundle detail shows three collecting and distributing members while one physical port is inconsistently selected or has uncorrected errors. The present evidence, however, is BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The relevant rule is: BFD offers fast fault detection but detection intervals must reflect path and platform processing behavior.
This alternative invokes: GRES depends on supported synchronized Routing Engine state, not hardware redundancy alone. Evidence for this case: High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed. The governing distinction for the recorded case is BFD offers fast fault detection but detection intervals must reflect path and platform processing behavior.
Question 464
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Intended bounded correction: Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior. Which independently verifiable test best demonstrates the intended correction worked?
Answer and Explanation
Correct Answer: D
A different option checks: All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss. The case-specific acceptance condition is instead BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.
Passing that test would not establish resolution of the stated issue. The relevant proof is: BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.
That result would assess another condition: The shared resolver prefix is available to the approved instance while unauthorized customer routes are absent from both route displays and forwarding tests. The correct criterion is directly linked to the finding: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence. This verifies the required result rather than merely stating the action; the original issue was BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
Question 465
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Distinguishing evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. Which material service-availability, routing, switching or security risk most directly needs control?
Answer and Explanation
Correct Answer: A
The relevant boundary is: Excessively aggressive failure detection can create repeated withdrawals that are worse than the original occasional delay. It matters when applying the specific response: Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.
This limitation concerns another setting: Assuming the presence of two Routing Engines guarantees hitless switchover can cause avoidable outage. The observed facts here make a different caution decisive: Excessively aggressive failure detection can create repeated withdrawals that are worse than the original occasional delay.
Another caution is: A syntactically valid summary can conceal an unreachable constituent when operators rely only on control-plane advertisement. The key risk in this case is: Excessively aggressive failure detection can create repeated withdrawals that are worse than the original occasional delay.
Another emphasis concerns: Conflating distinct high-availability features can make unsupported hitless-upgrade promises and lead to unexpected service loss. The current change is Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior; the material limitation is Excessively aggressive failure detection can create repeated withdrawals that are worse than the original occasional delay.
Question 466
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Distinguishing evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. Which focused investigation is the most useful before modifying the network configuration?
Answer and Explanation
Correct Answer: C
Another check would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Next-hop displays show multiple usable forwarding next hops, yet the test repeats one fixed five-tuple that consistently hashes to a single link. The case observation to isolate is BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The focused check here is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
Another investigation would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: VRRP state displays show changed effective priorities, interface tracking, or configured preemption behavior that differs from the approved failback design. It does not directly establish the reported condition: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
The current finding is BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The specific pre-change check is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. Use it to distinguish the problem from an unrelated symptom.
Another check would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Change review shows graceful restart configured but NSR or other high-availability capabilities absent and a test exposes a temporary control-plane adjacency resynchronization. The case observation to isolate is BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The focused check here is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
Question 467
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Distinguishing evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. Which controlled operational implementation sequence best protects the related provider service?
Answer and Explanation
Correct Answer: B
Another possible combination is: First verify the observed failure (Next-hop displays show multiple usable forwarding next hops, yet the test repeats one fixed five-tuple that consistently hashes to a single link.); review and authorize the bounded correction (Inspect the forwarding-table next hops and the Junos load-balancing policy, then measure multiple independent flows and validate the intended per-flow distribution.); then independently verify the intended outcome (A broad representative multi-flow test uses both eligible paths while sessions preserve stable forwarding and loss stays within the agreed threshold.) before production rollout. The current record instead supports Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior, verified by BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.
The starting point is BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The proposed action and its separate check are Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior and BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence, respectively.
Another action-and-check pairing is: First verify the observed failure (VRRP state displays show changed effective priorities, interface tracking, or configured preemption behavior that differs from the approved failback design.); review and authorize the bounded correction (Review VRRP advertisement, tracking and preemption conditions, then restore the documented gateway active-standby policy without forcing an untested outage.); then independently verify the intended outcome (Controlled primary failure and recovery show a predictable gateway master role and preserved host connectivity.) before production rollout. The evidence here is BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The required action and proof are Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior and BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.
An alternative plan is: First verify the observed failure (High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed.); review and authorize the bounded correction (Check GRES prerequisites, chassis versions and redundancy synchronization before authorizing a controlled Routing Engine switchover.); then independently verify the intended outcome (Redundancy status becomes ready and the approved test preserves operational interface state within documented continuity targets.) before production rollout. It does not test the case-specific condition: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
Question 468
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Distinguishing evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. Which set of evidence, limited change and independent validation best justifies authorization?
Answer and Explanation
Correct Answer: A
The approval decision should consider BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The specific proposal is: Observed evidence (BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.), limited correction (Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.), independently measurable result (BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.). Its measurable outcome is: BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.
Another approval action is: Observed evidence (Change review shows graceful restart configured but NSR or other high-availability capabilities absent and a test exposes a temporary control-plane adjacency resynchronization.), limited correction (Distinguish GR, GRES and NSR supported roles, verify actual chassis and protocol prerequisites and use only approved continuity techniques for the planned event.), independently measurable result (A sandbox or maintenance test measures the agreed forwarding and neighbor behavior for each configured redundancy feature before production rollout.). The relevant evidence and acceptance are BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design and BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence, respectively.
Another approval package concerns: Observed evidence (VRRP state displays show changed effective priorities, interface tracking, or configured preemption behavior that differs from the approved failback design.), limited correction (Review VRRP advertisement, tracking and preemption conditions, then restore the documented gateway active-standby policy without forcing an untested outage.), independently measurable result (Controlled primary failure and recovery show a predictable gateway master role and preserved host connectivity.). The present scope must instead be justified by BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
An alternative release decision is: Observed evidence (The routing table shows the configured static prefix with an unresolved next-hop state while the new transit interface has a different active adjacency and reachable gateway.), limited correction (Correct the static next-hop resolution against the verified active transit gateway and confirm the candidate configuration before committing the narrow change.), independently measurable result (A controlled upstream failure and recovery shows the expected active route only while its resolved next hop is reachable and service probes succeed.). It does not match the current change: Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.
Question 469
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Distinguishing evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. If the change fails its expected acceptance test, which controlled recovery approach is most appropriate?
Answer and Explanation
Correct Answer: C
Another recovery route would pause changes, preserve the differentiating evidence (VRRP state displays show changed effective priorities, interface tracking, or configured preemption behavior that differs from the approved failback design.), restore the last approved safe network state and reassess vrrp backup becomes master after an expected preemption check. It does not preserve the condition of this case: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The bounded fallback is: Pause changes, preserve the differentiating evidence (BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.), restore the last approved safe network state and reassess bfd timer mismatch produces frequent false failure detection.
Another option proposes: Pause changes, preserve the differentiating evidence (The firewall filter counter rises on a broad term that matches management subnet packets along with the intended customer source prefix.), restore the last approved safe network state and reassess filter-based forwarding changes the wrong customer stream. Its assumptions differ from the observed failure; the appropriate recovery is: Pause changes, preserve the differentiating evidence (BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.), restore the last approved safe network state and reassess bfd timer mismatch produces frequent false failure detection.
A recovery option is to pause changes, preserve the differentiating evidence (BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.), restore the last approved safe network state and reassess bfd timer mismatch produces frequent false failure detection. The intended change was Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior, and acceptance must still be judged against BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.
Another recovery route would pause changes, preserve the differentiating evidence (Change review shows graceful restart configured but NSR or other high-availability capabilities absent and a test exposes a temporary control-plane adjacency resynchronization.), restore the last approved safe network state and reassess nonstop routing expectations are incorrectly inferred from graceful restart. It does not preserve the condition of this case: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. The bounded fallback is: Pause changes, preserve the differentiating evidence (BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.), restore the last approved safe network state and reassess bfd timer mismatch produces frequent false failure detection.
Question 470
A fictional Junos service-provider engineer encounters this scenario: Two core routers use BFD to detect fast path failures, but sessions flap in peak control-plane load despite continuously passing ordinary large-packet forwarding tests. Distinguishing evidence: BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design. Which bounded approval scope avoids unintended changes to other provider or customer services?
Answer and Explanation
Correct Answer: D
An alternative approval would approve only the bounded change (Inspect LAG member speed, LACP participation and physical health, then repair or isolate the anomalous member under approved redundancy policy.) after independently checking (All intended members participate compatibly and multi-flow traffic crosses the LAG without selective packet loss.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design and BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence, respectively.
Another proposed approval would approve only the bounded change (Repeat routing and operational tests explicitly in the correct customer instance and investigate any actual gap without changing global routing.) after independently checking (Route displays and sourced tests from the correct instance explain end-to-end reachability and isolate the false default-table alarm.), without quietly widening the provider or customer network scope. The present scope must instead be justified by BFD history indicates missed rapid control packets correlated with CPU spikes and peer timer negotiation different from the intended service design.
A separate release decision would approve only the bounded change (Distinguish GR, GRES and NSR supported roles, verify actual chassis and protocol prerequisites and use only approved continuity techniques for the planned event.) after independently checking (A sandbox or maintenance test measures the agreed forwarding and neighbor behavior for each configured redundancy feature before production rollout.), without quietly widening the provider or customer network scope. It does not match the current change: Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.
The bounded proposal is: Approve only the bounded change (Check supported BFD interval, multiplier, processing and path-loss evidence, then align an achievable detection profile and validate actual loss behavior.) after independently checking (BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.), without quietly widening the provider or customer network scope. The separate acceptance measure remains: BFD remains stable under representative load and a controlled link failure triggers timely protected-route convergence.
Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests
- Juniper JN0-364 Practice Test 45 - 10 Questions (Last Reviewed 05-Oct-2026)
- Juniper JN0-364 Practice Test 46 - 10 Questions (Last Reviewed 04-Oct-2026)
- Juniper JN0-364 Practice Test 47 - 10 Questions (Last Reviewed 03-Oct-2026)
- Juniper JN0-364 Practice Test 48 - 10 Questions (Last Reviewed 02-Oct-2026)
- Juniper JN0-364 Practice Test 49 - 10 Questions (Last Reviewed 01-Oct-2026)