Pass HP HPE7-A08 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
HP HPE7-A08 Practice Test 87
Question 860
In a multisite service assurance team, engineers discover during a routing and performance escalation that a call center reports jitter after a policy change because telephone RTP flows no longer receive expected QoS markings. The project must protect approved network access while addressing the specific cause. Which evidence most specifically identifies this fault instead of a similar switch problem?
Explanation
Correct Answer
Packet captures show unmarked voice flows and egress drops in best effort queues. Telephone RTP flows no longer receive expected QoS markings rather than a generic link alarm. A call center reports jitter after a policy change because telephone RTP flows no longer receive expected QoS markings.
Incorrect Answers
“One peer indicates negotiated full duplex while the other side shows mismatched fixed settings and errors” does not explain the observed failure: a call center reports jitter after a policy change because telephone RTP flows no longer receive expected QoS markings. Telephone RTP flows no longer receive expected QoS markings rather than a generic link alarm. Packet captures show unmarked voice flows and egress drops in best effort queues.
“Egress priority queue counters attribute most usage to bulk flows instead of approved real time classes” does not explain the observed failure: a call center reports jitter after a policy change because telephone RTP flows no longer receive expected QoS markings. Packet captures show unmarked voice flows and egress drops in best effort queues.
“Interface shows administratively down rather than physical link failure” concerns a different part of the problem. A call center reports jitter after a policy change because telephone RTP flows no longer receive expected QoS markings. Packet captures show unmarked voice flows and egress drops in best effort queues.
Question 861
In a municipal services switching organization, engineers discover during a network segmentation validation test that a proposed EVPN VXLAN extension assumes endpoint segments will reach across sites before the VTEP underlay paths are available. The project must protect approved network access while addressing the specific cause. Which acceptance observation is necessary to close this specific network issue?
Explanation
Correct Answer
Validated overlay endpoints exchange permitted traffic with working underlay and control plane. Overlay forwarding depends on an available correctly routed IP underlay. Underlay route tests show VTEP loopback addresses unreachable across the aggregation path, which must differ from the measured post-change state.
Incorrect Answers
Hosts in approved VLANs reach each other through intended routed gateway with policy enforcement. Underlay route tests show VTEP loopback addresses unreachable across the aggregation path, which must differ from the measured post-change state. Validated overlay endpoints exchange permitted traffic with working underlay and control plane.
“New clients obtain valid address prefix gateway and DNS through the intended relay” does not explain the observed failure: underlay route tests show VTEP loopback addresses unreachable across the aggregation path, which must differ from the measured post-change state. Overlay forwarding depends on an available correctly routed IP underlay. Validated overlay endpoints exchange permitted traffic with working underlay and control plane.
Employee role reaches only allowed services and guest endpoints remain isolated. Underlay route tests show VTEP loopback addresses unreachable across the aggregation path, which must differ from the measured post-change state. Validated overlay endpoints exchange permitted traffic with working underlay and control plane.
Question 862
In a managed LAN engineering contractor, engineers discover during a wired network handoff audit that a multicast distribution tree receives packets on an interface not selected by unicast routing toward the source. The project must protect approved network access while addressing the specific cause. Which underlying forwarding or operations principle explains the proposed change?
Explanation
Correct Answer
Multicast forwarding relies on a valid reverse path toward the source. A multicast distribution tree receives packets on an interface not selected by unicast routing toward the source.
Incorrect Answers
“IGMP snooping maintains state through membership signaling and queries” concerns a different part of the problem. A multicast distribution tree receives packets on an interface not selected by unicast routing toward the source. Multicast forwarding relies on a valid reverse path toward the source.
A multicast distribution tree receives packets on an interface not selected by unicast routing toward the source. The proposed action “Network management integration needs consistent inventory ownership and alert routing” would not resolve that situation. Multicast forwarding relies on a valid reverse path toward the source.
Running configuration and startup state must be made consistent leaves the reported concern untested: a multicast distribution tree receives packets on an interface not selected by unicast routing toward the source. Multicast forwarding relies on a valid reverse path toward the source.
Question 863
During a critical wired outage investigation for a campus network incident response team, a fault trace confirms that a routed network upgrade activates OSPF authentication on one switch only and adjacency goes down. The team needs a supported change with independently measurable acceptance evidence. What finding should an engineer use to distinguish the root cause?
Explanation
Correct Answer
OSPF logging reports an authentication mismatch between formerly full neighbors. Routing protocol neighbors must agree on authentication to exchange routing state. During a critical wired outage investigation for a campus network incident response team, a fault trace confirms that a routed network upgrade activates OSPF authentication on one switch only and adjacency goes down.
Incorrect Answers
“VSX status reports peer synchronization failure and the inter switch link is down” does not demonstrate what is needed when during a critical wired outage investigation for a campus network incident response team, a fault trace confirms that a routed network upgrade activates OSPF authentication on one switch only and adjacency goes down. OSPF logging reports an authentication mismatch between formerly full neighbors.
“Port VLAN membership differs from the asset location plan and DHCP offers carry the voice subnet” does not explain the observed failure: during a critical wired outage investigation for a campus network incident response team, a fault trace confirms that a routed network upgrade activates OSPF authentication on one switch only and adjacency goes down. OSPF logging reports an authentication mismatch between formerly full neighbors.
Routing protocol neighbors must agree on authentication to exchange routing state. During a critical wired outage investigation for a campus network incident response team, a fault trace confirms that a routed network upgrade activates OSPF authentication on one switch only and adjacency goes down. The proposed action “Change history ties the outage to one Central group revision affecting multiple switches” would not resolve that situation. OSPF logging reports an authentication mismatch between formerly full neighbors.
Question 864
During a packet loss fault isolation for a regional network operations center, a fault trace confirms that a branch workstation has a narrower prefix mask than the rest of its VLAN and treats a neighboring subnet as remote. The team needs a supported change with independently measurable acceptance evidence. What is the most defensible corrective implementation for this case?
Explanation
Correct Answer
Correct the client addressing to match the approved local subnet and gateway plan. Problem host route table sends same VLAN destination traffic to a gateway unlike known good hosts, making correct the client addressing to match the approved local subnet and gateway plan more relevant than changes aimed at neighboring features.
Incorrect Answers
Restore correct LACP system and member connectivity according to multi chassis design. Problem host route table sends same VLAN destination traffic to a gateway unlike known good hosts, making correct the client addressing to match the approved local subnet and gateway plan more relevant than changes aimed at neighboring features. Correct the client addressing to match the approved local subnet and gateway plan.
“Correct device authorization mapping using validated identity attributes and required voice VLAN” does not demonstrate what is needed when problem host route table sends same VLAN destination traffic to a gateway unlike known good hosts, making correct the client addressing to match the approved local subnet and gateway plan more relevant than changes aimed at neighboring features. Correct the client addressing to match the approved local subnet and gateway plan.
“Restore the port administrative state only after checking approved interface policy” does not explain the observed failure: problem host route table sends same VLAN destination traffic to a gateway unlike known good hosts, making correct the client addressing to match the approved local subnet and gateway plan more relevant than changes aimed at neighboring features. Correct the client addressing to match the approved local subnet and gateway plan.
Question 865
In a municipal services switching organization, engineers discover during a network segmentation validation test that a new access closet accepts Ethernet link but several high power devices do not start because available PoE class is insufficient. The project must protect approved network access while addressing the specific cause. What is the most defensible corrective implementation for this case?
Explanation
Correct Answer
Verify per port PoE standards and total chassis budget before assigning powered endpoints. Available PoE class is insufficient. Switch PoE status reports allocation denied for devices exceeding port or system power budget, making verify per port PoE standards and total chassis budget before assigning powered endpoints more relevant than changes aimed at neighboring features.
Incorrect Answers
Confirm breakout capability and supported cable mapping before cabling and port configuration. Available PoE class is insufficient. Switch PoE status reports allocation denied for devices exceeding port or system power budget, making verify per port PoE standards and total chassis budget before assigning powered endpoints more relevant than changes aimed at neighboring features. Verify per port PoE standards and total chassis budget before assigning powered endpoints.
Select compatible optics and fiber type for the supported wavelength and reach. Switch PoE status reports allocation denied for devices exceeding port or system power budget, making verify per port PoE standards and total chassis budget before assigning powered endpoints more relevant than changes aimed at neighboring features. Verify per port PoE standards and total chassis budget before assigning powered endpoints.
Apply supported BPDU protection at the intended network edge and validate recovery workflow. Switch PoE status reports allocation denied for devices exceeding port or system power budget, making verify per port PoE standards and total chassis budget before assigning powered endpoints more relevant than changes aimed at neighboring features. Verify per port PoE standards and total chassis budget before assigning powered endpoints because available PoE class is insufficient.
Question 866
During a critical wired outage investigation for a campus network incident response team, a fault trace confirms that a long fiber uplink stays up but receives CRC and FCS errors that lower effective throughput. The team needs a supported change with independently measurable acceptance evidence. Which acceptance observation is necessary to close this specific network issue?
Explanation
Correct Answer
Link carries sustained traffic without CRC error growth after optical remediation. Corrupted frames cause retransmissions and throughput decline unrelated to routing policy. Interface CRC FCS error counters increase at the same times as application retries, which must differ from the measured post-change state.
Incorrect Answers
“Burst test produces bounded queue loss and meets application latency target” concerns a different part of the problem. Interface CRC FCS error counters increase at the same times as application retries, which must differ from the measured post-change state. Link carries sustained traffic without CRC error growth after optical remediation.
Corrupted frames cause retransmissions and throughput decline unrelated to routing policy. Interface CRC FCS error counters increase at the same times as application retries, which must differ from the measured post-change state. The proposed action “Storm indicators normalize and edge protection prevents recurrence under test” would not resolve that situation. Link carries sustained traffic without CRC error growth after optical remediation.
The proposed step “Error rates and application transfer time normalize at agreed interface parameters” would leave the problem unresolved: interface CRC FCS error counters increase at the same times as application retries, which must differ from the measured post-change state. Link carries sustained traffic without CRC error growth after optical remediation.
Question 867
In a regional hospital network change group, engineers discover during a high-availability implementation meeting that a remote branch buys a high capacity modular chassis for only twelve copper devices and no planned aggregation requirement. The project must protect approved network access while addressing the specific cause. The diagnostic trace is inventory shows twelve endpoint ports and a small number of routed uplinks with no modular chassis requirement. Which change-and-test combination would you approve for the affected network?
Explanation
Correct Answer
Match compact campus access switch capacity and uplink ports to actual branch demand. Verify that chosen access platform satisfies port count PoE and uplink capacity at documented scale. Portfolio selection should fit access density and expansion rather than maximize chassis features. Inventory shows twelve endpoint ports and a small number of routed uplinks with no modular chassis requirement, and the pair must correct that exact failure.
Incorrect Answers
Topology tests preserve reachability without a forwarding loop during link changes. The required validation is different: chosen access platform satisfies port count PoE and uplink capacity at documented scale. Match compact campus access switch capacity and uplink ports to actual branch demand.
Standardized access design passes security and failover tests without unused overlay services. It would not verify that chosen access platform satisfies port count PoE and uplink capacity at documented scale. Inventory shows twelve endpoint ports and a small number of routed uplinks with no modular chassis requirement, and the pair must correct that exact failure.
Chosen access platform satisfies port count PoE and uplink capacity at documented scale. To correct the reported problem, match compact campus access switch capacity and uplink ports to actual branch demand. Portfolio selection should fit access density and expansion rather than maximize chassis features.
Question 868
In an international retailer branch deployment team, engineers discover during a new-site network commissioning review that a small office chooses a feature intensive leaf fabric approach despite a simple VLAN and routed uplink deployment requirement. The project must protect approved network access while addressing the specific cause. Which network engineering principle explains why the targeted fix is appropriate?
Explanation
Correct Answer
Complexity should be justified by explicit design requirements. The result standardized access design passes security and failover tests without unused overlay services specifically tests the reported fault. A small office chooses a feature intensive leaf fabric approach despite a simple VLAN and routed uplink deployment requirement.
Incorrect Answers
“Campus core roles demand scalability and fault isolation beyond access edge needs” does not explain the observed failure: a small office chooses a feature intensive leaf fabric approach despite a simple VLAN and routed uplink deployment requirement. The result standardized access design passes security and failover tests without unused overlay services specifically tests the reported fault. Complexity should be justified by explicit design requirements.
“High availability technology support is model and software dependent” does not explain the observed failure: a small office chooses a feature intensive leaf fabric approach despite a simple VLAN and routed uplink deployment requirement. The result standardized access design passes security and failover tests without unused overlay services specifically tests the reported fault. Complexity should be justified by explicit design requirements.
“Default gateway locality and routing design define failure domains” does not demonstrate what is needed when a small office chooses a feature intensive leaf fabric approach despite a simple VLAN and routed uplink deployment requirement. Complexity should be justified by explicit design requirements.
Question 869
In a managed LAN engineering contractor, engineers discover during a wired network handoff audit that an access engineer configures an uplink as a single untagged VLAN despite a requirement to carry several tagged services. The project must protect approved network access while addressing the specific cause. Which underlying forwarding or operations principle explains the proposed change?
Explanation
Correct Answer
Port VLAN mode and peer tagging must agree. An access engineer configures an uplink as a single untagged VLAN despite a requirement to carry several tagged services.
Incorrect Answers
“Similar network products can use different operating systems and command models” concerns a different part of the problem. An access engineer configures an uplink as a single untagged VLAN despite a requirement to carry several tagged services. Port VLAN mode and peer tagging must agree.
The proposed step “Multicast forwarding relies on a valid reverse path toward the source” would leave the problem unresolved: an access engineer configures an uplink as a single untagged VLAN despite a requirement to carry several tagged services. Port VLAN mode and peer tagging must agree.
Running configuration and startup state must be made consistent. An access engineer configures an uplink as a single untagged VLAN despite a requirement to carry several tagged services. Port VLAN mode and peer tagging must agree.
Question 870
During a routing and performance escalation for a multisite service assurance team, a fault trace confirms that a campus distribution pair loses its VSX inter switch link and dual homed services become unstable. The team needs a supported change with independently measurable acceptance evidence. Which network engineering principle explains why the targeted fix is appropriate?
Explanation
Correct Answer
VSX resilience relies on monitored peer synchronization and link separation. During a routing and performance escalation for a multisite service assurance team, a fault trace confirms that a campus distribution pair loses its VSX inter switch link and dual homed services become unstable.
Incorrect Answers
“Firmware changes require a validated boot and fallback strategy” does not demonstrate what is needed when during a routing and performance escalation for a multisite service assurance team, a fault trace confirms that a campus distribution pair loses its VSX inter switch link and dual homed services become unstable. VSX resilience relies on monitored peer synchronization and link separation.
“Authentication service availability and fallback authorization are separate design requirements” does not explain the observed failure: during a routing and performance escalation for a multisite service assurance team, a fault trace confirms that a campus distribution pair loses its VSX inter switch link and dual homed services become unstable. VSX resilience relies on monitored peer synchronization and link separation.
“Flow based aggregation hashing can create member imbalances with large individual flows” concerns a different part of the problem. During a routing and performance escalation for a multisite service assurance team, a fault trace confirms that a campus distribution pair loses its VSX inter switch link and dual homed services become unstable. VSX resilience relies on monitored peer synchronization and link separation.
HPE Network Switching Professional (HPE7-A08) Practice Tests
- HP HPE7-A08 Practice Test 85 - 10 Questions (Last Reviewed 25-Oct-2026)
- HP HPE7-A08 Practice Test 86 - 10 Questions (Last Reviewed 24-Oct-2026)
- HP HPE7-A08 Practice Test 87 - 10 Questions (Last Reviewed 23-Oct-2026)
- HP HPE7-A08 Practice Test 88 - 10 Questions (Last Reviewed 22-Oct-2026)
- HP HPE7-A08 Practice Test 89 - 10 Questions (Last Reviewed 21-Oct-2026)
