Pass HP HPE7-A08 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
HP HPE7-A08 Practice Test 85
Question 840
In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an Aruba CX access switch receives RADIUS authentication accept from ClearPass but does not apply the intended downloadable role. The project must protect approved network access while addressing the specific cause. Before changing equipment, which operational observation best confirms the diagnosis?
Explanation
Correct Answer
RADIUS response contains role information but effective access role remains fallback. Policy server response and switch role consumption must agree. An Aruba CX access switch receives RADIUS authentication accept from ClearPass but does not apply the intended downloadable role.
Incorrect Answers
The proposed step “Tunnel status shows no established forwarding path although local access authentication succeeds” would leave the problem unresolved: an Aruba CX access switch receives RADIUS authentication accept from ClearPass but does not apply the intended downloadable role. RADIUS response contains role information but effective access role remains fallback.
“Device configuration shows unauthorized trunk VLANs immediately after group enrollment” does not explain the observed failure: an Aruba CX access switch receives RADIUS authentication accept from ClearPass but does not apply the intended downloadable role. Policy server response and switch role consumption must agree. RADIUS response contains role information but effective access role remains fallback.
“Device events appear under an unrelated branch and no responsible engineer receives the alarm” does not demonstrate what is needed when an Aruba CX access switch receives RADIUS authentication accept from ClearPass but does not apply the intended downloadable role. RADIUS response contains role information but effective access role remains fallback.
Question 841
During a configuration drift review for an enterprise change control council, a fault trace confirms that a network management system reports that one application fails only for a particular campus VLAN after a security change. The team needs a supported change with independently measurable acceptance evidence. The diagnostic trace is one explicit deny entry counter rises for the rejected application test flow. Which combined corrective action and matching validation best meets the objective?
Explanation
Correct Answer
Examine ACL hit counters and rule order for the specific source destination protocol. Verify that authorized service traffic is permitted while forbidden traffic retains enforced denial. One explicit deny entry counter rises for the rejected application test flow, and the pair must correct that exact failure.
Incorrect Answers
Post repair optical power is in supported range and no warning events recur. It would not verify that authorized service traffic is permitted while forbidden traffic retains enforced denial. One explicit deny entry counter rises for the rejected application test flow, and the pair must correct that exact failure.
Authorized service traffic is permitted while forbidden traffic retains enforced denial. To correct the reported problem, examine ACL hit counters and rule order for the specific source destination protocol.
Pilot and sequential production upgrades preserve routing security and redundancy with tested recovery. The required validation is different: authorized service traffic is permitted while forbidden traffic retains enforced denial. Examine ACL hit counters and rule order for the specific source destination protocol.
Question 842
In an enterprise change control council, engineers discover during a configuration drift review that an organization treats all Aruba CX switches as identical templates despite variation in supported port interfaces and feature sets. The project must protect approved network access while addressing the specific cause. Which network engineering principle explains why the targeted fix is appropriate?
Explanation
Correct Answer
Configuration standardization must account for capability differences. The intended supported intervention is use validated model aware configuration profiles rather than indiscriminately copying every command. An organization treats all Aruba CX switches as identical templates despite variation in supported port interfaces and feature sets.
Incorrect Answers
“Image maintenance should follow version compatibility and failure domain controls” does not demonstrate what is needed when an organization treats all Aruba CX switches as identical templates despite variation in supported port interfaces and feature sets. Configuration standardization must account for capability differences.
“Configuration backup quality depends on reproducibility and matching persisted state” concerns a different part of the problem. An organization treats all Aruba CX switches as identical templates despite variation in supported port interfaces and feature sets. Configuration standardization must account for capability differences.
The intended supported intervention is use validated model aware configuration profiles rather than indiscriminately copying every command. An organization treats all Aruba CX switches as identical templates despite variation in supported port interfaces and feature sets. The proposed action “Configuration compliance includes changes made outside normal automation” would not resolve that situation. Configuration standardization must account for capability differences.
Question 843
In a managed LAN engineering contractor, engineers discover during a wired network handoff audit that a switch aggregation group has two physical uplinks but one partner port uses a different LACP actor mode and key. The project must protect approved network access while addressing the specific cause. Which acceptance observation is necessary to close this specific network issue?
Explanation
Correct Answer
Both intended members are collecting and distributing with expected failover. LACP partner information shows one member not selected despite its physical link being up, which must differ from the measured post-change state. In a managed LAN engineering contractor, engineers discover during a wired network handoff audit that a switch aggregation group has two physical uplinks but one partner port uses a different LACP actor mode and key.
Incorrect Answers
A controlled reload preserves intended VLAN membership and client access. LACP partner information shows one member not selected despite its physical link being up, which must differ from the measured post-change state. Both intended members are collecting and distributing with expected failover.
Expected root and alternate port states hold through topology failover tests. LACP partner information shows one member not selected despite its physical link being up, which must differ from the measured post-change state. Both intended members are collecting and distributing with expected failover.
“Stack converges as the intended logical unit and surviving members preserve service during tested failure” does not explain the observed failure: lACP partner information shows one member not selected despite its physical link being up, which must differ from the measured post-change state. Both intended members are collecting and distributing with expected failover.
Question 844
In an international retailer branch deployment team, engineers discover during a new-site network commissioning review that a campus design requires local routed gateways but leaves default gateways on a remote switch that may be isolated by WAN loss. The project must protect approved network access while addressing the specific cause. Before changing equipment, which operational observation best confirms the diagnosis?
Explanation
Correct Answer
Device subnet and gateway location diagram reveals every local VLAN depends on a remote link. Default gateway locality and routing design define failure domains. A campus design requires local routed gateways but leaves default gateways on a remote switch that may be isolated by WAN loss. Local VLAN clients retain allowed gateway and service access during simulated WAN outage.
Incorrect Answers
The proposed step “Migration runbook has no per site validation gates and no known good routing configuration” would leave the problem unresolved: a campus design requires local routed gateways but leaves default gateways on a remote switch that may be isolated by WAN loss. Device subnet and gateway location diagram reveals every local VLAN depends on a remote link.
“Subnet inventory identifies the same prefix on two independently routed interfaces” does not explain the observed failure: a campus design requires local routed gateways but leaves default gateways on a remote switch that may be isolated by WAN loss. Default gateway locality and routing design define failure domains. Device subnet and gateway location diagram reveals every local VLAN depends on a remote link.
“Rack acceptance sheet names dual feeds but the submitted bill has only one supply input” does not explain the observed failure: a campus design requires local routed gateways but leaves default gateways on a remote switch that may be isolated by WAN loss. Default gateway locality and routing design define failure domains. Device subnet and gateway location diagram reveals every local VLAN depends on a remote link.
Question 845
During a routing and performance escalation for a multisite service assurance team, a fault trace confirms that an application provider marks bulk transfer packets as high priority and consumes queue bandwidth intended for latency sensitive calls. The team needs a supported change with independently measurable acceptance evidence. What technical concept best distinguishes this situation from other switching failures?
Explanation
Correct Answer
Misclassification can defeat intended QoS isolation. A fault trace confirms that an application provider marks bulk transfer packets as high priority and consumes queue bandwidth intended for latency sensitive calls.
Incorrect Answers
“Corrupted frames cause retransmissions and throughput decline unrelated to routing policy” concerns a different part of the problem. A fault trace confirms that an application provider marks bulk transfer packets as high priority and consumes queue bandwidth intended for latency sensitive calls. Misclassification can defeat intended QoS isolation.
A fault trace confirms that an application provider marks bulk transfer packets as high priority and consumes queue bandwidth intended for latency sensitive calls. The proposed action “Host prefix length determines on link versus routed destination decisions” would not resolve that situation. Misclassification can defeat intended QoS isolation.
The proposed step “Latency sensitive flows need end to end consistent QoS treatment” would leave the problem unresolved: a fault trace confirms that an application provider marks bulk transfer packets as high priority and consumes queue bandwidth intended for latency sensitive calls. Misclassification can defeat intended QoS isolation.
Question 846
In a hospital connectivity escalation group, engineers discover during a switch troubleshooting session that a campus access switch uplink has valid physical connectivity but remains blocking because a redundant Layer 2 path is selected by MSTP. The project must protect approved network access while addressing the specific cause. Which network engineering principle explains why the targeted fix is appropriate?
Explanation
Correct Answer
Spanning tree can intentionally block a healthy physical interface to prevent loops. A redundant Layer 2 path is selected by MSTP, as supported by the specific evidence MSTP status identifies the uplink as an alternate discarding port while a different path forwards, rather than a generic switching design claim. A campus access switch uplink has valid physical connectivity but remains blocking because a redundant Layer 2 path is selected by MSTP.
Incorrect Answers
“IP uniqueness is necessary for deterministic neighboring and forwarding” does not demonstrate what is needed when a campus access switch uplink has valid physical connectivity but remains blocking because a redundant Layer 2 path is selected by MSTP. Spanning tree can intentionally block a healthy physical interface to prevent loops.
“Authentication service availability and fallback authorization are separate design requirements” does not explain the observed failure: a campus access switch uplink has valid physical connectivity but remains blocking because a redundant Layer 2 path is selected by MSTP. Spanning tree can intentionally block a healthy physical interface to prevent loops.
“Administrative port state overrides physical media readiness” concerns a different part of the problem. A campus access switch uplink has valid physical connectivity but remains blocking because a redundant Layer 2 path is selected by MSTP. Spanning tree can intentionally block a healthy physical interface to prevent loops.
Question 847
In a manufacturing enterprise network architect, engineers discover during a secured plant-to-campus refresh that a network engineer commits to a hardware model before verifying whether the requested overlay capability exists in its targeted software release. The project must protect approved network access while addressing the specific cause. What measurable result best demonstrates recovery without creating a new access exposure?
Explanation
Correct Answer
The delivered image and hardware demonstrate all required overlay and routing functions in a lab. Requested overlay feature is absent from the release specific supported feature matrix for the selected SKU, which must differ from the measured post-change state. In a manufacturing enterprise network architect, engineers discover during a secured plant-to-campus refresh that a network engineer commits to a hardware model before verifying whether the requested overlay capability.
Incorrect Answers
The validated stack supported by the chosen model forms the required control and data plane topology. Requested overlay feature is absent from the release specific supported feature matrix for the selected SKU, which must differ from the measured post-change state. The delivered image and hardware demonstrate all required overlay and routing functions in a lab.
New and existing hosts reach approved destinations with unambiguous routes and no duplicate subnet ownership. Requested overlay feature is absent from the release specific supported feature matrix for the selected SKU, which must differ from the measured post-change state. The delivered image and hardware demonstrate all required overlay and routing functions in a lab.
Loss of either approved feed leaves switching service within the agreed availability objective. Requested overlay feature is absent from the release specific supported feature matrix for the selected SKU, which must differ from the measured post-change state. The delivered image and hardware demonstrate all required overlay and routing functions in a lab.
Question 848
During a switch troubleshooting session for a hospital connectivity escalation group, a fault trace confirms that a switch reboot after firmware maintenance fails to reach service because compatibility and rollback procedures were not checked. The team needs a supported change with independently measurable acceptance evidence. What technical concept best distinguishes this situation from other switching failures?
Explanation
Correct Answer
Firmware changes require a validated boot and fallback strategy. Compatibility and rollback procedures were not checked, as supported by the specific evidence boot history identifies the new software slot as failed while the prior version remained operational, rather than a generic switching design claim. A fault trace confirms that a switch reboot after firmware maintenance fails to reach service because compatibility and rollback procedures were not checked.
Incorrect Answers
Routing protocol neighbors must agree on authentication to exchange routing state is not a direct response to the evidence: a fault trace confirms that a switch reboot after firmware maintenance fails to reach service because compatibility and rollback procedures were not checked. Firmware changes require a validated boot and fallback strategy.
Compatibility and rollback procedures were not checked, as supported by the specific evidence boot history identifies the new software slot as failed while the prior version remained operational, rather than a generic switching design claim. A fault trace confirms that a switch reboot after firmware maintenance fails to reach service because compatibility and rollback procedures were not checked. The proposed action “IP uniqueness is necessary for deterministic neighboring and forwarding” would not resolve that situation. Firmware changes require a validated boot and fallback strategy.
“Centralized configuration rollback should follow the same scope and audit discipline as deployment” does not explain the observed failure: a fault trace confirms that a switch reboot after firmware maintenance fails to reach service because compatibility and rollback procedures were not checked. Compatibility and rollback procedures were not checked, as supported by the specific evidence boot history identifies the new software slot as failed while the prior version remained operational, rather than a generic switching design claim. Firmware changes require a validated boot and fallback strategy.
Question 849
In a multi-campus infrastructure SRE team, engineers discover during a quarterly platform health review that a switch configuration API client uses global administrator credentials for a read only inventory reporting job. The project must protect approved network access while addressing the specific cause. The diagnostic trace is authorization log shows a reporting token permitted to modify routing and interface state. Which combined corrective action and matching validation best meets the objective?
Explanation
Correct Answer
Apply scoped access credentials and test least privilege for the API automation identity. Verify that reporting API reads succeed and unauthorized configuration writes are rejected and logged. Authorization log shows a reporting token permitted to modify routing and interface state, and the pair must correct that exact failure.
Incorrect Answers
Repaired uplink has stable counters and application packet loss meets target. The required validation is different: reporting API reads succeed and unauthorized configuration writes are rejected and logged. Apply scoped access credentials and test least privilege for the API automation identity.
Reporting API reads succeed and unauthorized configuration writes are rejected and logged. To correct the reported problem, apply scoped access credentials and test least privilege for the API automation identity.
Monitoring supplies required data freshness without overloading management CPU or API. It would not verify that reporting API reads succeed and unauthorized configuration writes are rejected and logged. Authorization log shows a reporting token permitted to modify routing and interface state, and the pair must correct that exact failure.
Question 850
In a university campus infrastructure team, engineers discover during a wired network topology design review that an engineer diagrams two aggregation switches but never validates host reachability during one device failure. The project must protect approved network access while addressing the specific cause. The diagnostic trace is design acceptance contains only steady state link up tests despite a high availability requirement. Which intervention paired with its proof closes this exact failure?
Explanation
Correct Answer
Create a failover test plan for the selected redundancy technology and critical client services. Verify that controlled failure exercises meet convergence and packet loss service objectives. Design acceptance contains only steady state link up tests despite a high availability requirement, and the pair must correct that exact failure. In a university campus infrastructure team, engineers discover during a wired network topology design review that an engineer diagrams two aggregation switches but never validates host reachability during one device failure.
Incorrect Answers
Topology tests preserve reachability without a forwarding loop during link changes. It would not verify that controlled failure exercises meet convergence and packet loss service objectives. Design acceptance contains only steady state link up tests despite a high availability requirement, and the pair must correct that exact failure.
Loss of either approved feed leaves switching service within the agreed availability objective. The required validation is different: controlled failure exercises meet convergence and packet loss service objectives. Create a failover test plan for the selected redundancy technology and critical client services.
Controlled failure exercises meet convergence and packet loss service objectives. To correct the reported problem, create a failover test plan for the selected redundancy technology and critical client services. In a university campus infrastructure team, engineers discover during a wired network topology design review that an engineer diagrams two aggregation switches but never validates host reachability during one device failure.
HPE Network Switching Professional (HPE7-A08) Practice Tests
- HP HPE7-A08 Practice Test 83 - 10 Questions (Last Reviewed 27-Oct-2026)
- HP HPE7-A08 Practice Test 84 - 10 Questions (Last Reviewed 26-Oct-2026)
- HP HPE7-A08 Practice Test 85 - 10 Questions (Last Reviewed 25-Oct-2026)
- HP HPE7-A08 Practice Test 86 - 10 Questions (Last Reviewed 24-Oct-2026)
- HP HPE7-A08 Practice Test 87 - 10 Questions (Last Reviewed 23-Oct-2026)
