HP HPE7-A08 Practice Test 77 - Prepaway
Practice Exams:

Pass HP HPE7-A08 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$14.99
$74.99 $89.98

HPE7-A08 Premium Bundle


  • Premium File 172 Questions & Answers. Last update: Nov 21, 2026
  • Study Guide 794 Pages

HP HPE7-A08 Practice Test 77

Question 760

During an operational monitoring analysis for a managed switching services provider, a fault trace confirms that a VSX distribution pair logs keepalive interruption while the data carrying inter switch link remains healthy. The team needs a supported change with independently measurable acceptance evidence. The diagnostic trace is VSX status specifically reports keepalive lost while the peer forwarding link is operational. Which combined corrective action and matching validation best meets the objective?

  1. use validated model aware configuration profiles rather than indiscriminately copying every command — verify: all device types accept correct intended parameters and compliance report shows no failed targets
  2. inspect dedicated keepalive network health and confirm safe peer monitoring before changes — verify: repaired uplink has stable counters and application packet loss meets target
  3. correlate OSPF neighbor transitions with physical events and stabilize the affected neighbor path — verify: peer health and separate keepalive reachability recover without disrupting authorized flows
  4. inspect dedicated keepalive network health and confirm safe peer monitoring before changes — verify: peer health and separate keepalive reachability recover without disrupting authorized flows

Explanation

Correct Answer

D:

Inspect dedicated keepalive network health and confirm safe peer monitoring before changes. Verify that peer health and separate keepalive reachability recover without disrupting authorized flows. The result peer health and separate keepalive reachability recover without disrupting authorized flows specifically tests the reported fault. VSX status specifically reports keepalive lost while the peer forwarding link is operational, and the pair must correct that exact failure.

Incorrect Answers

A:

All device types accept correct intended parameters and compliance report shows no failed targets. The required validation is different: peer health and separate keepalive reachability recover without disrupting authorized flows. Inspect dedicated keepalive network health and confirm safe peer monitoring before changes.

B:

Repaired uplink has stable counters and application packet loss meets target. It would not verify that peer health and separate keepalive reachability recover without disrupting authorized flows. VSX status specifically reports keepalive lost while the peer forwarding link is operational, and the pair must correct that exact failure.

C:

Peer health and separate keepalive reachability recover without disrupting authorized flows. To correct the reported problem, inspect dedicated keepalive network health and confirm safe peer monitoring before changes. The result peer health and separate keepalive reachability recover without disrupting authorized flows specifically tests the reported fault.

Question 761

In an international retailer branch deployment team, engineers discover during a new-site network commissioning review that a small office chooses a feature intensive leaf fabric approach despite a simple VLAN and routed uplink deployment requirement. The project must protect approved network access while addressing the specific cause. Which targeted configuration or design decision should the engineer take first?

  1. calculate traffic demand and plan redundant high speed uplinks before deploying the closet switches
  2. select the simplest supported HPE Aruba networking access architecture satisfying connectivity and resilience
  3. choose switching platforms and power options that implement the specified power failure resilience
  4. select a scalable campus aggregation or modular switching platform according to supported capacity and resilience

Explanation

Correct Answer

B:

Select the simplest supported HPE Aruba networking access architecture satisfying connectivity and resilience. Office topology has one wiring closet and no fabric endpoint segmentation or scale requirement, making select the simplest supported HPE Aruba networking access architecture satisfying connectivity and resilience more relevant than changes aimed at neighboring features.

Incorrect Answers

A:

“Calculate traffic demand and plan redundant high speed uplinks before deploying the closet switches” does not explain the observed failure: office topology has one wiring closet and no fabric endpoint segmentation or scale requirement, making select the simplest supported HPE Aruba networking access architecture satisfying connectivity and resilience more relevant than changes aimed at neighboring features. Select the simplest supported HPE Aruba networking access architecture satisfying connectivity and resilience.

C:

Choose switching platforms and power options that implement the specified power failure resilience. Office topology has one wiring closet and no fabric endpoint segmentation or scale requirement, making select the simplest supported HPE Aruba networking access architecture satisfying connectivity and resilience more relevant than changes aimed at neighboring features. Select the simplest supported HPE Aruba networking access architecture satisfying connectivity and.

D:

Selecting a scalable campus aggregation or modular switching platform according to supported capacity and resilience leaves the reported concern untested: office topology has one wiring closet and no fabric endpoint segmentation or scale requirement, making select the simplest supported HPE Aruba networking access architecture satisfying connectivity and resilience more relevant than changes aimed at neighboring features. Select the simplest supported HPE Aruba networking access architecture satisfying connectivity and resilience.

Question 762

During a critical wired outage investigation for a campus network incident response team, a fault trace confirms that an access policy update intended to block unauthorized destinations also denies a permitted application port. The team needs a supported change with independently measurable acceptance evidence. Which targeted configuration or design decision should the engineer take first?

  1. remove the duplicate address and align allocation with the managed subnet inventory
  2. use the supported safe image rollback path and revalidate version compatibility before retry
  3. restore the last reviewed group template with device and site validation before wider rollout
  4. isolate matching ACL entry and revise rule order to retain business permitted traffic

Explanation

Correct Answer

D:

Isolate matching ACL entry and revise rule order to retain business permitted traffic. ACL hit counters rise for an explicit deny matching an approved client flow, making isolate matching ACL entry and revise rule order to retain business permitted traffic more relevant than changes aimed at neighboring features.

Incorrect Answers

A:

Remove the duplicate address and align allocation with the managed subnet inventory. ACL hit counters rise for an explicit deny matching an approved client flow, making isolate matching ACL entry and revise rule order to retain business permitted traffic more relevant than changes aimed at neighboring features. Isolate matching ACL entry and revise rule order to retain business permitted traffic.

B:

Using the supported safe image rollback path and revalidate version compatibility before retry addresses a separate aspect of the case. ACL hit counters rise for an explicit deny matching an approved client flow, making isolate matching ACL entry and revise rule order to retain business permitted traffic more relevant than changes aimed at neighboring features. Isolate matching ACL entry and revise rule order to retain business permitted traffic.

C:

“Restore the last reviewed group template with device and site validation before wider rollout” does not explain the observed failure: aCL hit counters rise for an explicit deny matching an approved client flow, making isolate matching ACL entry and revise rule order to retain business permitted traffic more relevant than changes aimed at neighboring features. Isolate matching ACL entry and revise rule order to retain business permitted traffic.

Question 763

During a production switch lifecycle review for a telecommunications backbone operations unit, a fault trace confirms that a dual supply campus core remains operational after one PSU failed but no one notices the lost redundancy. The team needs a supported change with independently measurable acceptance evidence. What finding should an engineer use to distinguish the root cause?

  1. audit diff reveals port authorization differs from approved standardized switch baseline
  2. module diagnostic telemetry records persistent low RX power while transmit values remain normal
  3. system health inventory lists one supply failed although line cards and data plane remain active
  4. routing event timestamps match repeated link carrier loss on one adjacent interface

Explanation

Correct Answer

C:

System health inventory lists one supply failed although line cards and data plane remain active. During a production switch lifecycle review for a telecommunications backbone operations unit, a fault trace confirms that a dual supply campus core remains operational after one PSU failed but no one notices the lost redundancy.

Incorrect Answers

A:

The proposed step “Audit diff reveals port authorization differs from approved standardized switch baseline” would leave the problem unresolved: during a production switch lifecycle review for a telecommunications backbone operations unit, a fault trace confirms that a dual supply campus core remains operational after one PSU failed but no one notices the lost redundancy. System health inventory lists one supply failed although line cards and data plane remain active.

B:

Module diagnostic telemetry records persistent low RX power while transmit values remain normal. During a production switch lifecycle review for a telecommunications backbone operations unit, a fault trace confirms that a dual supply campus core remains operational after one PSU failed but no one notices the lost redundancy. System health inventory lists one supply failed although line cards and data plane remain active.

D:

Routing event timestamps match repeated link carrier loss on one adjacent interface addresses a separate aspect of the case. During a production switch lifecycle review for a telecommunications backbone operations unit, a fault trace confirms that a dual supply campus core remains operational after one PSU failed but no one notices the lost redundancy. System health inventory lists one supply failed although line cards and data plane remain active.

Question 764

In a campus network incident response team, engineers discover during a critical wired outage investigation that a branch workstation has a narrower prefix mask than the rest of its VLAN and treats a neighboring subnet as remote. The project must protect approved network access while addressing the specific cause. The diagnostic trace is problem host route table sends same VLAN destination traffic to a gateway unlike known good hosts. Which combined corrective action and matching validation best meets the objective?

  1. correct the client addressing to match the approved local subnet and gateway plan — verify: each endpoint has a unique address and reaches the gateway without ARP churn
  2. inspect optical receive power connectors and fiber path for attenuation and repair the physical cause — verify: test host reaches local peers and remote destinations through the approved next hop
  3. isolate matching ACL entry and revise rule order to retain business permitted traffic — verify: approved flows pass and unauthorized traffic is still denied under paired tests
  4. correct the client addressing to match the approved local subnet and gateway plan — verify: test host reaches local peers and remote destinations through the approved next hop

Explanation

Correct Answer

D:

Correct the client addressing to match the approved local subnet and gateway plan. Verify that test host reaches local peers and remote destinations through the approved next hop. Problem host route table sends same VLAN destination traffic to a gateway unlike known good hosts, and the pair must correct that exact failure. In a campus network incident response team, engineers discover during a critical wired outage investigation that a branch workstation has a narrower prefix mask than the rest of its VLAN and treats a neighboring subnet as remote.

Incorrect Answers

A:

Each endpoint has a unique address and reaches the gateway without ARP churn. It would not verify that test host reaches local peers and remote destinations through the approved next hop. Problem host route table sends same VLAN destination traffic to a gateway unlike known good hosts, and the pair must correct that exact failure.

B:

Test host reaches local peers and remote destinations through the approved next hop. To correct the reported problem, correct the client addressing to match the approved local subnet and gateway plan. In a campus network incident response team, engineers discover during a critical wired outage investigation that a branch workstation has a narrower prefix mask than the rest of its VLAN and treats a neighboring subnet as remote.

C:

Approved flows pass and unauthorized traffic is still denied under paired tests. The required validation is different: test host reaches local peers and remote destinations through the approved next hop. Correct the client addressing to match the approved local subnet and gateway plan.

Question 765

In a hospital connectivity escalation group, engineers discover during a switch troubleshooting session that a campus access switch uplink has valid physical connectivity but remains blocking because a redundant Layer 2 path is selected by MSTP. The project must protect approved network access while addressing the specific cause. Which acceptance observation is necessary to close this specific network issue?

  1. pilot devices regain approved VLANs and fleet remains consistent after controlled rollout
  2. application payloads of intended size traverse the path with approved MTU and no black hole
  3. intended redundant ports converge to documented roles and no L2 loops occur
  4. interface shows operational up and permitted traffic passes without relaxing security

Explanation

Correct Answer

C:

Intended redundant ports converge to documented roles and no L2 loops occur. A redundant Layer 2 path is selected by MSTP in Spanning tree blocks expected forwarding port — operational setting A. MSTP status identifies the uplink as an alternate discarding port while a different path forwards, which must differ from the measured post-change state.

Incorrect Answers

A:

Piloting devices regain approved VLANs and fleet remains consistent after controlled rollout addresses a separate aspect of the case. MSTP status identifies the uplink as an alternate discarding port while a different path forwards, which must differ from the measured post-change state. Intended redundant ports converge to documented roles and no L2 loops occur.

B:

“Application payloads of intended size traverse the path with approved MTU and no black hole” does not explain the observed failure: mSTP status identifies the uplink as an alternate discarding port while a different path forwards, which must differ from the measured post-change state. Intended redundant ports converge to documented roles and no L2 loops occur.

D:

A redundant Layer 2 path is selected by MSTP in Spanning tree blocks expected forwarding port — operational setting A. MSTP status identifies the uplink as an alternate discarding port while a different path forwards, which must differ from the measured post-change state. The proposed action “Interface shows operational up and permitted traffic passes without relaxing security” would not resolve that situation. Intended redundant ports converge to documented roles and no L2 loops occur.

Question 766

During a production switch lifecycle review for a telecommunications backbone operations unit, a fault trace confirms that an access closet reports increasing hardware temperature and fans at maximum speed after ventilation was obstructed. The team needs a supported change with independently measurable acceptance evidence. Which evidence most specifically identifies this fault instead of a similar switch problem?

  1. queue metrics show sustained discards in the marked real time class during concurrent uploads
  2. hardware sensor logs show sustained rising temperature with fan warnings in a crowded rack
  3. switch history shows configuration differences but no linked change ticket or identity
  4. inventory maps the core switch to a retired branch group and alarms route to former owners

Explanation

Correct Answer

B:

Hardware sensor logs show sustained rising temperature with fan warnings in a crowded rack. During a production switch lifecycle review for a telecommunications backbone operations unit, a fault trace confirms that an access closet reports increasing hardware temperature and fans at maximum speed after ventilation was obstructed.

Incorrect Answers

A:

Queue metrics show sustained discards in the marked real time class during concurrent uploads. During a production switch lifecycle review for a telecommunications backbone operations unit, a fault trace confirms that an access closet reports increasing hardware temperature and fans at maximum speed after ventilation was obstructed. Hardware sensor logs show sustained rising temperature with fan warnings in a crowded rack.

C:

“Switch history shows configuration differences but no linked change ticket or identity” does not demonstrate what is needed when during a production switch lifecycle review for a telecommunications backbone operations unit, a fault trace confirms that an access closet reports increasing hardware temperature and fans at maximum speed after ventilation was obstructed. Hardware sensor logs show sustained rising temperature with fan warnings in a crowded rack.

D:

“Inventory maps the core switch to a retired branch group and alarms route to former owners” does not explain the observed failure: during a production switch lifecycle review for a telecommunications backbone operations unit, a fault trace confirms that an access closet reports increasing hardware temperature and fans at maximum speed after ventilation was obstructed. Hardware sensor logs show sustained rising temperature with fan warnings in a crowded rack.

Question 767

In a campus access deployment group, engineers discover during an AOS-CX configuration rollout that a distribution layer installs two Aruba CX peers but treats them as one logical chassis without establishing supported VSX peer and keepalive design. The project must protect approved network access while addressing the specific cause. Which underlying forwarding or operations principle explains the proposed change?

  1. network management integration needs consistent inventory ownership and alert routing
  2. VSX uses independent control planes with coordinated multi chassis forwarding
  3. centralized user enforcement depends on reliable switch to gateway transport
  4. logical interface fanout must match hardware port capability

Explanation

Correct Answer

B:

VSX uses independent control planes with coordinated multi chassis forwarding. A distribution layer installs two Aruba CX peers but treats them as one logical chassis without establishing supported VSX peer and keepalive design.

Incorrect Answers

A:

A distribution layer installs two Aruba CX peers but treats them as one logical chassis without establishing supported VSX peer and keepalive design. The proposed action “Network management integration needs consistent inventory ownership and alert routing” would not resolve that situation. VSX uses independent control planes with coordinated multi chassis forwarding.

C:

Centralized user enforcement depends on reliable switch to gateway transport. A distribution layer installs two Aruba CX peers but treats them as one logical chassis without establishing supported VSX peer and keepalive design. VSX uses independent control planes with coordinated multi chassis forwarding.

D:

Logical interface fanout must match hardware port capability. A distribution layer installs two Aruba CX peers but treats them as one logical chassis without establishing supported VSX peer and keepalive design. VSX uses independent control planes with coordinated multi chassis forwarding.

Question 768

During an AOS-CX configuration rollout for a campus access deployment group, a fault trace confirms that a switch aggregation group has two physical uplinks but one partner port uses a different LACP actor mode and key. The team needs a supported change with independently measurable acceptance evidence. After remediation, which test result proves the original fault has been corrected?

  1. expected root and alternate port states hold through topology failover tests
  2. each permitted service stays within intended VLAN and management frames do not cross boundary
  3. both intended members are collecting and distributing with expected failover
  4. group memberships refresh and multicast streams reach only intended receivers

Explanation

Correct Answer

C:

Both intended members are collecting and distributing with expected failover. LACP partner information shows one member not selected despite its physical link being up, which must differ from the measured post-change state.

Incorrect Answers

A:

“Expected root and alternate port states hold through topology failover tests” does not explain the observed failure: lACP partner information shows one member not selected despite its physical link being up, which must differ from the measured post-change state. Both intended members are collecting and distributing with expected failover.

B:

“Each permitted service stays within intended VLAN and management frames do not cross boundary” concerns a different part of the problem. LACP partner information shows one member not selected despite its physical link being up, which must differ from the measured post-change state. Both intended members are collecting and distributing with expected failover.

D:

The proposed step “Group memberships refresh and multicast streams reach only intended receivers” would leave the problem unresolved: lACP partner information shows one member not selected despite its physical link being up, which must differ from the measured post-change state. Both intended members are collecting and distributing with expected failover.

Question 769

During a configuration drift review for an enterprise change control council, a fault trace confirms that an operations dashboard reports intermittent packet loss on one switch uplink despite normal routing neighbor state. The team needs a supported change with independently measurable acceptance evidence. Which underlying forwarding or operations principle explains the proposed change?

  1. monitoring effectiveness depends on alert routing and inventory context
  2. physical frame corruption has observable interface error evidence
  3. operational governance requires evidence of what changed why and by whom
  4. event driven analytics can reveal short anomalies beyond coarse periodic polling

Explanation

Correct Answer

B:

Physical frame corruption has observable interface error evidence. During a configuration drift review for an enterprise change control council, a fault trace confirms that an operations dashboard reports intermittent packet loss on one switch uplink despite normal routing neighbor state.

Incorrect Answers

A:

Monitoring effectiveness depends on alert routing and inventory context. During a configuration drift review for an enterprise change control council, a fault trace confirms that an operations dashboard reports intermittent packet loss on one switch uplink despite normal routing neighbor state. Physical frame corruption has observable interface error evidence.

C:

“Operational governance requires evidence of what changed why and by whom” does not explain the observed failure: during a configuration drift review for an enterprise change control council, a fault trace confirms that an operations dashboard reports intermittent packet loss on one switch uplink despite normal routing neighbor state. Physical frame corruption has observable interface error evidence.

D:

“Event driven analytics can reveal short anomalies beyond coarse periodic polling” concerns a different part of the problem. During a configuration drift review for an enterprise change control council, a fault trace confirms that an operations dashboard reports intermittent packet loss on one switch uplink despite normal routing neighbor state. Physical frame corruption has observable interface error evidence.

Question 770

In a regional network operations center, engineers discover during a packet loss fault isolation that a four link aggregation runs near overload on one member although overall bundle throughput is below capacity. The project must protect approved network access while addressing the specific cause. The diagnostic trace is one physical LACP member is heavily saturated while other members remain underused. Which intervention paired with its proof closes this exact failure?

  1. restore correct voice classification and egress scheduling at bottleneck ports — verify: traffic distribution meets workload requirement without expecting a single flow to span multiple members
  2. rebalance power allocation or upgrade compliant power capacity and validate maximum demand — verify: every approved access point powers and radios remain operational at peak demand
  3. inspect flow distribution and adjust supported hash or flow placement strategy with verified outcome — verify: backup scheduling or host link design meets throughput goals without unnecessary campus uplink changes
  4. inspect flow distribution and adjust supported hash or flow placement strategy with verified outcome — verify: traffic distribution meets workload requirement without expecting a single flow to span multiple members

Explanation

Correct Answer

D:

Inspect flow distribution and adjust supported hash or flow placement strategy with verified outcome. Verify that traffic distribution meets workload requirement without expecting a single flow to span multiple members. One physical LACP member is heavily saturated while other members remain underused, and the pair must correct that exact failure. In a regional network operations center, engineers discover during a packet loss fault isolation that a four link aggregation runs near overload on one member although overall bundle throughput is below capacity.

Incorrect Answers

A:

Traffic distribution meets workload requirement without expecting a single flow to span multiple members. To correct the reported problem, inspect flow distribution and adjust supported hash or flow placement strategy with verified outcome. In a regional network operations center, engineers discover during a packet loss fault isolation that a four link aggregation runs near overload on one member although overall bundle throughput is below capacity.

B:

Every approved access point powers and radios remain operational at peak demand. The required validation is different: traffic distribution meets workload requirement without expecting a single flow to span multiple members. Inspect flow distribution and adjust supported hash or flow placement strategy with verified outcome.

C:

Backup scheduling or host link design meets throughput goals without unnecessary campus uplink changes. It would not verify that traffic distribution meets workload requirement without expecting a single flow to span multiple members. One physical LACP member is heavily saturated while other members remain underused, and the pair must correct that exact failure. In a regional network operations center, engineers discover during a packet loss fault isolation that a four link aggregation runs near overload on one member although overall bundle throughput is below capacity.

HPE Network Switching Professional (HPE7-A08) Practice Tests