Pass HP HPE7-A08 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
HP HPE7-A08 Practice Test 76
Question 750
During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that a proposed floor rollout counts Ethernet ports but not the combined power draw of phones and wireless access points. The team needs a supported change with independently measurable acceptance evidence. Which evidence most specifically identifies this fault instead of a similar switch problem?
Explanation
Correct Answer
Device budget requires more watts than the selected access stack supplies at full load. Power budget is a capacity constraint separate from interface count. During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that a proposed floor rollout counts Ethernet ports but not the combined power draw of phones and wireless access points.
Incorrect Answers
Power budget is a capacity constraint separate from interface count. During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that a proposed floor rollout counts Ethernet ports but not the combined power draw of phones and wireless access points. The proposed action “Topology diagram contains a Layer 2 ring but no documented spanning tree root or blocked alternate path” would not resolve that situation. Device budget requires more watts than the selected access stack supplies at full load.
The proposed step “Selected switch datasheet lacks the expected VSF functionality while the proposal requires one logical stack” would leave the problem unresolved: during a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that a proposed floor rollout counts Ethernet ports but not the combined power draw of phones and wireless access points. Device budget requires more watts than the selected access stack supplies at full load.
“Management interface relies on the same VLAN and route being replaced during the change” does not explain the observed failure: during a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that a proposed floor rollout counts Ethernet ports but not the combined power draw of phones and wireless access points. Power budget is a capacity constraint separate from interface count. Device budget requires more watts than the selected access stack supplies at full load.
Question 751
During a switch troubleshooting session for a hospital connectivity escalation group, a fault trace confirms that a campus trunk reports normal five minute average throughput but real time application latency spikes under short bursts. The team needs a supported change with independently measurable acceptance evidence. After remediation, which test result proves the original fault has been corrected?
Explanation
Correct Answer
Burst test produces bounded queue loss and meets application latency target. Queue discard counters increase during bursts while average interface utilization appears low, which must differ from the measured post-change state. During a switch troubleshooting session for a hospital connectivity escalation group, a fault trace confirms that a campus trunk reports normal five minute average throughput but real time application latency spikes under short bursts.
Incorrect Answers
“High priority queue occupancy matches approved classes and call loss remains within target” does not demonstrate what is needed when queue discard counters increase during bursts while average interface utilization appears low, which must differ from the measured post-change state. Burst test produces bounded queue loss and meets application latency target.
“Link carries sustained traffic without CRC error growth after optical remediation” does not explain the observed failure: queue discard counters increase during bursts while average interface utilization appears low, which must differ from the measured post-change state. Burst test produces bounded queue loss and meets application latency target.
“Storm indicators normalize and edge protection prevents recurrence under test” concerns a different part of the problem. Queue discard counters increase during bursts while average interface utilization appears low, which must differ from the measured post-change state. Burst test produces bounded queue loss and meets application latency target.
Question 752
In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an Aruba CX access switch receives RADIUS authentication accept from ClearPass but does not apply the intended downloadable role. The project must protect approved network access while addressing the specific cause. What technical concept best distinguishes this situation from other switching failures?
Explanation
Correct Answer
Policy server response and switch role consumption must agree. An Aruba CX access switch receives RADIUS authentication accept from ClearPass but does not apply the intended downloadable role.
Incorrect Answers
VSX uses independent control planes with coordinated multi chassis forwarding. An Aruba CX access switch receives RADIUS authentication accept from ClearPass but does not apply the intended downloadable role. Policy server response and switch role consumption must agree.
Centralized user enforcement depends on reliable switch to gateway transport. An Aruba CX access switch receives RADIUS authentication accept from ClearPass but does not apply the intended downloadable role. Policy server response and switch role consumption must agree.
“Similar network products can use different operating systems and command models” does not demonstrate what is needed when an Aruba CX access switch receives RADIUS authentication accept from ClearPass but does not apply the intended downloadable role. Policy server response and switch role consumption must agree.
Question 753
During a switch compliance and maintenance audit for a network operations assurance office, a fault trace confirms that a VOIP support team sees jitter despite stable interface availability and routing adjacency. The team needs a supported change with independently measurable acceptance evidence. What finding should an engineer use to distinguish the root cause?
Explanation
Correct Answer
Queue metrics show sustained discards in the marked real time class during concurrent uploads. During a switch compliance and maintenance audit for a network operations assurance office, a fault trace confirms that a VOIP support team sees jitter despite stable interface availability and routing adjacency.
Incorrect Answers
During a switch compliance and maintenance audit for a network operations assurance office, a fault trace confirms that a VOIP support team sees jitter despite stable interface availability and routing adjacency. The proposed action “Inventory maps the core switch to a retired branch group and alarms route to former owners” would not resolve that situation. Queue metrics show sustained discards in the marked real time class during concurrent uploads.
The proposed step “System health inventory lists one supply failed although line cards and data plane remain active” would leave the problem unresolved: during a switch compliance and maintenance audit for a network operations assurance office, a fault trace confirms that a VOIP support team sees jitter despite stable interface availability and routing adjacency. Queue metrics show sustained discards in the marked real time class during concurrent uploads.
Fleet includes mixed switch models whose approved software support and feature matrices differ. During a switch compliance and maintenance audit for a network operations assurance office, a fault trace confirms that a VOIP support team sees jitter despite stable interface availability and routing adjacency. Queue metrics show sustained discards in the marked real time class during concurrent uploads.
Question 754
During an operational monitoring analysis for a managed switching services provider, a fault trace confirms that an organization treats all Aruba CX switches as identical templates despite variation in supported port interfaces and feature sets. The team needs a supported change with independently measurable acceptance evidence. The diagnostic trace is automation pushes unsupported interface commands to a subset of switches and reports rejects. Which combined corrective action and matching validation best meets the objective?
Explanation
Correct Answer
Use validated model aware configuration profiles rather than indiscriminately copying every command. Verify that all device types accept correct intended parameters and compliance report shows no failed targets. Configuration standardization must account for capability differences. Automation pushes unsupported interface commands to a subset of switches and reports rejects, and the pair must correct that exact failure.
Incorrect Answers
Rerunning the automation converges to one intended object and stable running state. The required validation is different: all device types accept correct intended parameters and compliance report shows no failed targets. Use validated model aware configuration profiles rather than indiscriminately copying every command.
Pilot, staged rollouts and a tested rollback meet per site connectivity checks. It would not verify that all device types accept correct intended parameters and compliance report shows no failed targets. Automation pushes unsupported interface commands to a subset of switches and reports rejects, and the pair must correct that exact failure. During an operational monitoring analysis for a managed switching services provider, a fault trace confirms that an organization treats all Aruba CX switches as identical templates despite variation in supported port.
All device types accept correct intended parameters and compliance report shows no failed targets. To correct the reported problem, use validated model aware configuration profiles rather than indiscriminately copying every command. Configuration standardization must account for capability differences.
Question 755
In a managed LAN engineering contractor, engineers discover during a wired network handoff audit that a switch aggregation group has two physical uplinks but one partner port uses a different LACP actor mode and key. The project must protect approved network access while addressing the specific cause. Which evidence most specifically identifies this fault instead of a similar switch problem?
Explanation
Correct Answer
LACP partner information shows one member not selected despite its physical link being up. A switch aggregation group has two physical uplinks but one partner port uses a different LACP actor mode and key.
Incorrect Answers
Interface membership tables show different untagged VLAN IDs at each end of the same link. A switch aggregation group has two physical uplinks but one partner port uses a different LACP actor mode and key. LACP partner information shows one member not selected despite its physical link being up.
“A newly introduced bridge advertises BPDUs into an edge port and triggers topology changes” does not demonstrate what is needed when a switch aggregation group has two physical uplinks but one partner port uses a different LACP actor mode and key. LACP partner information shows one member not selected despite its physical link being up.
“DHCP snooping drops offers on the uplink while client access port trust permits rogue responses” does not explain the observed failure: a switch aggregation group has two physical uplinks but one partner port uses a different LACP actor mode and key. LACP partner information shows one member not selected despite its physical link being up.
Question 756
During a routing and performance escalation for a multisite service assurance team, a fault trace confirms that a network path carries ping packets but fails on larger application payloads after an uplink change. The team needs a supported change with independently measurable acceptance evidence. What finding should an engineer use to distinguish the root cause?
Explanation
Correct Answer
Small probes pass while larger DF set probes fail at a specific link. During a routing and performance escalation for a multisite service assurance team, a fault trace confirms that a network path carries ping packets but fails on larger application payloads after an uplink change.
Incorrect Answers
The proposed step “Port VLAN membership differs from the asset location plan and DHCP offers carry the voice subnet” would leave the problem unresolved: during a routing and performance escalation for a multisite service assurance team, a fault trace confirms that a network path carries ping packets but fails on larger application payloads after an uplink change. Small probes pass while larger DF set probes fail at a specific link.
Interface shows administratively down rather than physical link failure. During a routing and performance escalation for a multisite service assurance team, a fault trace confirms that a network path carries ping packets but fails on larger application payloads after an uplink change. Small probes pass while larger DF set probes fail at a specific link.
“Boot history identifies the new software slot as failed while the prior version remained operational” does not demonstrate what is needed when during a routing and performance escalation for a multisite service assurance team, a fault trace confirms that a network path carries ping packets but fails on larger application payloads after an uplink change. Small probes pass while larger DF set probes fail at a specific link.
Question 757
During a packet loss fault isolation for a regional network operations center, a fault trace confirms that a phone authenticates successfully but is placed in a data role that denies voice registration service. The team needs a supported change with independently measurable acceptance evidence. The diagnostic trace is authentication history shows acceptance with a role lacking VoIP VLAN or call server access. Which combined corrective action and matching validation best meets the objective?
Explanation
Correct Answer
Correct device authorization mapping using validated identity attributes and required voice VLAN. Verify that registered phone receives intended voice policy and ordinary user roles remain isolated. Authentication history shows acceptance with a role lacking VoIP VLAN or call server access, and the pair must correct that exact failure. During a packet loss fault isolation for a regional network operations center, a fault trace confirms that a phone authenticates successfully but is placed in a data role that denies voice registration service.
Incorrect Answers
Registered phone receives intended voice policy and ordinary user roles remain isolated. To correct the reported problem, correct device authorization mapping using validated identity attributes and required voice VLAN. During a packet loss fault isolation for a regional network operations center, a fault trace confirms that a phone authenticates successfully but is placed in a data role that denies voice registration service.
Test host reaches local peers and remote destinations through the approved next hop. The required validation is different: registered phone receives intended voice policy and ordinary user roles remain isolated. Correct device authorization mapping using validated identity attributes and required voice VLAN.
Storm indicators normalize and edge protection prevents recurrence under test. It would not verify that registered phone receives intended voice policy and ordinary user roles remain isolated. Authentication history shows acceptance with a role lacking VoIP VLAN or call server access, and the pair must correct that exact failure.
Question 758
During an AOS-CX configuration rollout for a campus access deployment group, a fault trace confirms that a newly provisioned access switch enters a Central group whose configuration permits trunk VLANs not authorized at its branch. The team needs a supported change with independently measurable acceptance evidence. What measurable result best demonstrates recovery without creating a new access exposure?
Explanation
Correct Answer
Running switch policy matches branch requirements and unauthorized VLAN traffic fails. Device configuration shows unauthorized trunk VLANs immediately after group enrollment, which must differ from the measured post-change state. During an AOS-CX configuration rollout for a campus access deployment group, a fault trace confirms that a newly provisioned access switch enters a Central group whose configuration permits trunk VLANs not authorized at.
Incorrect Answers
“The actual switch appears managed in the intended organization group and site” does not demonstrate what is needed when device configuration shows unauthorized trunk VLANs immediately after group enrollment, which must differ from the measured post-change state. Running switch policy matches branch requirements and unauthorized VLAN traffic fails.
“Latency sensitive traffic and business data remain within measured delay and loss targets” does not explain the observed failure: device configuration shows unauthorized trunk VLANs immediately after group enrollment, which must differ from the measured post-change state. Running switch policy matches branch requirements and unauthorized VLAN traffic fails.
Device configuration shows unauthorized trunk VLANs immediately after group enrollment, which must differ from the measured post-change state. The proposed action “Post synchronization device running configuration retains the authorized interface intent” would not resolve that situation. Running switch policy matches branch requirements and unauthorized VLAN traffic fails.
Question 759
In a regional enterprise network architecture board, engineers discover during a multi-building migration plan that an extended campus connects redundant Layer 2 paths without an agreed spanning tree root placement and failure plan. The project must protect approved network access while addressing the specific cause. The diagnostic trace is topology diagram contains a Layer 2 ring but no documented spanning tree root or blocked alternate path. Which combined corrective action and matching validation best meets the objective?
Explanation
Correct Answer
Define validated loop prevention and root placement aligned to physical redundancy. Verify that topology tests preserve reachability without a forwarding loop during link changes. Topology diagram contains a Layer 2 ring but no documented spanning tree root or blocked alternate path, and the pair must correct that exact failure.
Incorrect Answers
Topology tests preserve reachability without a forwarding loop during link changes. To correct the reported problem, define validated loop prevention and root placement aligned to physical redundancy.
Tested core design meets projected port throughput resiliency and supported software requirements. The required validation is different: topology tests preserve reachability without a forwarding loop during link changes. Define validated loop prevention and root placement aligned to physical redundancy.
Traffic tests demonstrate documented permitted paths and deny prohibited paths. It would not verify that topology tests preserve reachability without a forwarding loop during link changes. Topology diagram contains a Layer 2 ring but no documented spanning tree root or blocked alternate path, and the pair must correct that exact failure.
Question 760
During an operational monitoring analysis for a managed switching services provider, a fault trace confirms that a VSX distribution pair logs keepalive interruption while the data carrying inter switch link remains healthy. The team needs a supported change with independently measurable acceptance evidence. The diagnostic trace is VSX status specifically reports keepalive lost while the peer forwarding link is operational. Which combined corrective action and matching validation best meets the objective?
Explanation
Correct Answer
Inspect dedicated keepalive network health and confirm safe peer monitoring before changes. Verify that peer health and separate keepalive reachability recover without disrupting authorized flows. The result peer health and separate keepalive reachability recover without disrupting authorized flows specifically tests the reported fault. VSX status specifically reports keepalive lost while the peer forwarding link is operational, and the pair must correct that exact failure.
Incorrect Answers
All device types accept correct intended parameters and compliance report shows no failed targets. The required validation is different: peer health and separate keepalive reachability recover without disrupting authorized flows. Inspect dedicated keepalive network health and confirm safe peer monitoring before changes.
Repaired uplink has stable counters and application packet loss meets target. It would not verify that peer health and separate keepalive reachability recover without disrupting authorized flows. VSX status specifically reports keepalive lost while the peer forwarding link is operational, and the pair must correct that exact failure.
Peer health and separate keepalive reachability recover without disrupting authorized flows. To correct the reported problem, inspect dedicated keepalive network health and confirm safe peer monitoring before changes. The result peer health and separate keepalive reachability recover without disrupting authorized flows specifically tests the reported fault.
HPE Network Switching Professional (HPE7-A08) Practice Tests
- HP HPE7-A08 Practice Test 74 - 10 Questions (Last Reviewed 05-Nov-2026)
- HP HPE7-A08 Practice Test 75 - 10 Questions (Last Reviewed 04-Nov-2026)
- HP HPE7-A08 Practice Test 76 - 10 Questions (Last Reviewed 03-Nov-2026)
- HP HPE7-A08 Practice Test 77 - 10 Questions (Last Reviewed 02-Nov-2026)
- HP HPE7-A08 Practice Test 78 - 10 Questions (Last Reviewed 01-Nov-2026)
