Pass Juniper JN0-364 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Juniper JN0-364 Practice Test 41
Question 400
A fictional Junos service-provider engineer encounters this scenario: A dual-stack managed customer network loses IPv6 static reachability after its core uplink changes interface numbering. Distinguishing evidence: The configured IPv6 link-local next hop exists on multiple segments but operational route resolution references the former interface rather than the active neighbor link. Which bounded approval scope avoids unintended changes to other provider or customer services?
Answer and Explanation
Correct Answer: D
Another proposed approval would approve only the bounded change (Confirm expected label advertisement and pop operation at the penultimate hop rather than forcing unnecessary labels through every device.) after independently checking (Captured traffic and destination forwarding demonstrate correct reachability with expected label disposition at each hop.), without quietly widening the provider or customer network scope. The present scope must instead be justified by the configured IPv6 link-local next hop exists on multiple segments but operational route resolution references the former interface rather than the active neighbor link.
A separate release decision would approve only the bounded change (Verify reachable IPv4 tunnel endpoints, permitted encapsulation and the specific IPv6 routing path before correcting endpoint configuration.) after independently checking (Encapsulated IPv6 traffic reaches the remote island with expected IPv4 outer endpoints and a tested return route.), without quietly widening the provider or customer network scope. It does not match the current change: Validate the intended outgoing interface and on-link IPv6 next-hop scope, then correct only the affected static route interface association.
An alternative approval would approve only the bounded change (Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family.) after independently checking (IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are the configured IPv6 link-local next hop exists on multiple segments but operational route resolution references the former interface rather than the active neighbor link and Neighbor discovery and route displays resolve through the correct active interface and IPv6 service probes work over the approved path, respectively.
The change-control boundary is: Approve only the bounded change (Validate the intended outgoing interface and on-link IPv6 next-hop scope, then correct only the affected static route interface association.) after independently checking (Neighbor discovery and route displays resolve through the correct active interface and IPv6 service probes work over the approved path.), without quietly widening the provider or customer network scope. The evidence for this scope is the configured IPv6 link-local next hop exists on multiple segments but operational route resolution references the former interface rather than the active neighbor link.
Question 401
A fictional Junos service-provider engineer encounters this scenario: Two service-provider BGP neighbors have an established IPv4 session but the newly requested IPv6 prefixes never enter the expected inet6 routing table. Distinguishing evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. Which specific bounded Junos routing or switching correction best addresses this service-provider issue?
Answer and Explanation
Correct Answer: A
IPv6 BGP family activation is omitted on a dual-stack peer. The decisive observation is Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. The proposed fix is: Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family. An observable result is: IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.
Another proposed action is: Inspect the label forwarding information base, push-swap-pop behavior and corresponding tunnel state on each relevant hop. It targets a different dependency; the evidence here is Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
Another option proposes: Verify reachable IPv4 tunnel endpoints, permitted encapsulation and the specific IPv6 routing path before correcting endpoint configuration. The specific correction is: Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family. The deciding evidence is: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
That alternative concerns: Validate interface family inet6, OSPFv3 topology and policy controlling IPv6 reachability before modifying the relevant scope. The relevant evidence is Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. The corresponding fix is: Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family.
Question 402
A fictional Junos service-provider engineer encounters this scenario: Two service-provider BGP neighbors have an established IPv4 session but the newly requested IPv6 prefixes never enter the expected inet6 routing table. Which observed operational evidence most strongly isolates the actual protocol or forwarding condition?
Answer and Explanation
Correct Answer: D
This other option describes: OSPFv3 neighbor output is full but route-family-specific database and export inspection show the intended prefix absent from an approved advertisement scope. The problem to explain is different: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
Another proposed finding is: The configured IPv6 link-local next hop exists on multiple segments but operational route resolution references the former interface rather than the active neighbor link. It is not the recorded discriminator, which is Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
Another piece of evidence concerns the route to the GRE remote destination shows the tunnel itself as next hop instead of an ordinary physical underlay path, and decapsulation counters stop increasing. The current incident instead shows: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. This distinction supports the action: Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family.
The deciding evidence is: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. This distinguishes the problem because BGP IPv6 route exchange requires compatible activated address families and route policy. The response it supports is: Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family.
Question 403
A fictional Junos service-provider engineer encounters this scenario: Two service-provider BGP neighbors have an established IPv4 session but the newly requested IPv6 prefixes never enter the expected inet6 routing table. Distinguishing evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. Which Junos networking principle best explains the relevant engineering decision?
Answer and Explanation
Correct Answer: B
The competing option invokes: GRES depends on supported synchronized Routing Engine state, not hardware redundancy alone. Evidence for this case: High-availability operational output shows graceful Routing Engine switchover not ready and state synchronization warnings despite both engines being installed. The present evidence is: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. The case-relevant principle is: BGP IPv6 route exchange requires compatible activated address families and route policy.
BGP IPv6 route exchange requires compatible activated address families and route policy. This distinction accounts for Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange; another unrelated mechanism would not address the same condition.
A different principle is: OSPFv3 adjacency and IPv6 route advertisement require appropriate address-family topology and routing state. Evidence for this case: OSPFv3 neighbor output is full but route-family-specific database and export inspection show the intended prefix absent from an approved advertisement scope. The present evidence, however, is Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. The relevant rule is: BGP IPv6 route exchange requires compatible activated address families and route policy.
This alternative invokes: IPv6-over-IPv4 tunneling relies on functional outer transport and independent inner IPv6 reachability. Evidence for this case: Tunnel interface and IPv4 underlay checks show an obsolete remote endpoint while the IPv6 routes point toward the tunnel logical interface. The governing distinction for the recorded case is BGP IPv6 route exchange requires compatible activated address families and route policy.
Question 404
A fictional Junos service-provider engineer encounters this scenario: Two service-provider BGP neighbors have an established IPv4 session but the newly requested IPv6 prefixes never enter the expected inet6 routing table. Intended bounded correction: Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family. Which independently verifiable test best demonstrates the intended correction worked?
Answer and Explanation
Correct Answer: C
A different option checks: Captured traffic and destination forwarding demonstrate correct reachability with expected label disposition at each hop. The case-specific acceptance condition is instead IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.
Passing that test would not establish resolution of the stated issue. The relevant proof is: IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.
Confirm the correction by demonstrating: IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy. This directly tests the intended change, Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family.
Another proposed result is: The advertised customer IPv6 prefix installs in the intended table and a scoped IPv6 path test completes with correct next-hop resolution. It would not independently establish the required outcome: IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.
Question 405
A fictional Junos service-provider engineer encounters this scenario: Two service-provider BGP neighbors have an established IPv4 session but the newly requested IPv6 prefixes never enter the expected inet6 routing table. Distinguishing evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. Which material service-availability, routing, switching or security risk most directly needs control?
Answer and Explanation
Correct Answer: A
The relevant boundary is: An established BGP TCP session does not guarantee every requested network layer address family is negotiated. It matters when applying the specific response: Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family.
This limitation concerns another setting: IPv4 route reachability or a single OSPFv3 neighbor state does not establish end-to-end IPv6 prefix routing. The observed facts here make a different caution decisive: An established BGP TCP session does not guarantee every requested network layer address family is negotiated.
Another caution is: Changing IPv6 routes alone cannot repair an unreachable outer IPv4 encapsulation endpoint. The key risk in this case is: An established BGP TCP session does not guarantee every requested network layer address family is negotiated.
Another emphasis concerns: A reachable IP destination does not prove that the MPLS labeled data path has an active next-hop binding. The current change is Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family; the material limitation is an established BGP TCP session does not guarantee every requested network layer address family is negotiated.
Question 406
A fictional Junos service-provider engineer encounters this scenario: Two service-provider BGP neighbors have an established IPv4 session but the newly requested IPv6 prefixes never enter the expected inet6 routing table. Distinguishing evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. Which focused investigation is the most useful before modifying the network configuration?
Answer and Explanation
Correct Answer: C
Another check would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: The configured IPv6 link-local next hop exists on multiple segments but operational route resolution references the former interface rather than the active neighbor link. The case observation to isolate is Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. The focused check here is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
Another investigation would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: OSPFv3 neighbor output is full but route-family-specific database and export inspection show the intended prefix absent from an approved advertisement scope. It does not directly establish the reported condition: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
The current finding is Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. The specific pre-change check is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. Use it to distinguish the problem from an unrelated symptom.
Another check would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: RSVP session state and explicit path display show an outdated strict hop, while IGP reachability has already moved to a different core next hop. The case observation to isolate is Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. The focused check here is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
Question 407
A fictional Junos service-provider engineer encounters this scenario: Two service-provider BGP neighbors have an established IPv4 session but the newly requested IPv6 prefixes never enter the expected inet6 routing table. Distinguishing evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. Which controlled operational implementation sequence best protects the related provider service?
Answer and Explanation
Correct Answer: C
Another possible combination is: First verify the observed failure (OSPFv3 neighbor output is full but route-family-specific database and export inspection show the intended prefix absent from an approved advertisement scope.); review and authorize the bounded correction (Validate interface family inet6, OSPFv3 topology and policy controlling IPv6 reachability before modifying the relevant scope.); then independently verify the intended outcome (The advertised customer IPv6 prefix installs in the intended table and a scoped IPv6 path test completes with correct next-hop resolution.) before production rollout. The current record instead supports Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family, verified by IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.
Another potential sequence is: First verify the observed failure (The route to the GRE remote destination shows the tunnel itself as next hop instead of an ordinary physical underlay path, and decapsulation counters stop increasing.); review and authorize the bounded correction (Correct the remote-endpoint underlay route so it remains independent of the GRE inner route, then validate inner and outer forwarding separately.); then independently verify the intended outcome (The GRE remote destination resolves through the physical transport interface while desired inner prefixes use the tunnel and probes complete.) before production rollout. It has no direct link to the distinguishing evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
The case evidence indicates: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. Apply the scoped action: Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family. Confirm its effect independently: IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.
An alternative plan is: First verify the observed failure (The configured IPv6 link-local next hop exists on multiple segments but operational route resolution references the former interface rather than the active neighbor link.); review and authorize the bounded correction (Validate the intended outgoing interface and on-link IPv6 next-hop scope, then correct only the affected static route interface association.); then independently verify the intended outcome (Neighbor discovery and route displays resolve through the correct active interface and IPv6 service probes work over the approved path.) before production rollout. It does not test the case-specific condition: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
Question 408
A fictional Junos service-provider engineer encounters this scenario: Two service-provider BGP neighbors have an established IPv4 session but the newly requested IPv6 prefixes never enter the expected inet6 routing table. Distinguishing evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. Which set of evidence, limited change and independent validation best justifies authorization?
Answer and Explanation
Correct Answer: D
An alternative release decision is: Observed evidence (The underlay IP route remains present but the affected next hop lacks an expected LDP label binding and LDP adjacency has dropped.), limited correction (Check LDP session transport, adjacency and matching labeled next hops before choosing a narrow protocol or underlay correction.), independently measurable result (LDP neighbors and label bindings recover for the intended FEC and payload forwarding resumes over the authorized LSP.). It does not match the current change: Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family.
Another approval action is: Observed evidence (OSPFv3 neighbor output is full but route-family-specific database and export inspection show the intended prefix absent from an approved advertisement scope.), limited correction (Validate interface family inet6, OSPFv3 topology and policy controlling IPv6 reachability before modifying the relevant scope.), independently measurable result (The advertised customer IPv6 prefix installs in the intended table and a scoped IPv6 path test completes with correct next-hop resolution.). The relevant evidence and acceptance are Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange and IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy, respectively.
Another approval package concerns: Observed evidence (The configured IPv6 link-local next hop exists on multiple segments but operational route resolution references the former interface rather than the active neighbor link.), limited correction (Validate the intended outgoing interface and on-link IPv6 next-hop scope, then correct only the affected static route interface association.), independently measurable result (Neighbor discovery and route displays resolve through the correct active interface and IPv6 service probes work over the approved path.). The present scope must instead be justified by Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
The approval decision should consider Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. The specific proposal is: Observed evidence (Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.), limited correction (Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family.), independently measurable result (IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.). Its measurable outcome is: IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.
Question 409
A fictional Junos service-provider engineer encounters this scenario: Two service-provider BGP neighbors have an established IPv4 session but the newly requested IPv6 prefixes never enter the expected inet6 routing table. Distinguishing evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. If the change fails its expected acceptance test, which controlled recovery approach is most appropriate?
Answer and Explanation
Correct Answer: B
Another recovery route would pause changes, preserve the differentiating evidence (The configured IPv6 link-local next hop exists on multiple segments but operational route resolution references the former interface rather than the active neighbor link.), restore the last approved safe network state and reassess ipv6 static route selects a link-local next hop on the wrong interface. It does not preserve the condition of this case: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. The bounded fallback is: Pause changes, preserve the differentiating evidence (Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.), restore the last approved safe network state and reassess ipv6 bgp family activation is omitted on a dual-stack peer.
A contingency plan would pause changes, preserve the differentiating evidence (Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.), restore the last approved safe network state and reassess ipv6 bgp family activation is omitted on a dual-stack peer. This preserves control of the change linked to Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
Another fallback concerns pausing changes, preserve the differentiating evidence (Change review shows graceful restart configured but NSR or other high-availability capabilities absent and a test exposes a temporary control-plane adjacency resynchronization.), restore the last approved safe network state and reassess nonstop routing expectations are incorrectly inferred from graceful restart. The current change concerns Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
Another recovery route would pause changes, preserve the differentiating evidence (OSPFv3 neighbor output is full but route-family-specific database and export inspection show the intended prefix absent from an approved advertisement scope.), restore the last approved safe network state and reassess ospfv3 adjacency is healthy but destination ipv6 route is missing. It does not preserve the condition of this case: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. The bounded fallback is: Pause changes, preserve the differentiating evidence (Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.), restore the last approved safe network state and reassess ipv6 bgp family activation is omitted on a dual-stack peer.
Question 410
A fictional Junos service-provider engineer encounters this scenario: Two service-provider BGP neighbors have an established IPv4 session but the newly requested IPv6 prefixes never enter the expected inet6 routing table. Distinguishing evidence: Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange. Which bounded approval scope avoids unintended changes to other provider or customer services?
Answer and Explanation
Correct Answer: A
The bounded proposal is: Approve only the bounded change (Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family.) after independently checking (IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.), without quietly widening the provider or customer network scope. The separate acceptance measure remains: IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy.
Another proposed approval would approve only the bounded change (Assess encapsulation overhead and actual path MTU, permit needed diagnostics and apply the approved size or MSS treatment without indiscriminately disabling controls.) after independently checking (Large and small customer test packets pass the tunnel with no fragmentation-related blackholing and filter policy remains appropriately scoped.), without quietly widening the provider or customer network scope. The present scope must instead be justified by Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange.
A separate release decision would approve only the bounded change (Validate the intended outgoing interface and on-link IPv6 next-hop scope, then correct only the affected static route interface association.) after independently checking (Neighbor discovery and route displays resolve through the correct active interface and IPv6 service probes work over the approved path.), without quietly widening the provider or customer network scope. It does not match the current change: Confirm both peers' approved IPv6 unicast family configuration and import/export policies before enabling the specific family.
An alternative approval would approve only the bounded change (Validate interface family inet6, OSPFv3 topology and policy controlling IPv6 reachability before modifying the relevant scope.) after independently checking (The advertised customer IPv6 prefix installs in the intended table and a scoped IPv6 path test completes with correct next-hop resolution.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are Session summary is established for the transport, yet address-family negotiation and received route views show no active IPv6 unicast exchange and IPv6 routes appear only in the authorized routing tables and scoped IPv6 forwarding succeeds without altering existing IPv4 policy, respectively.
Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests
- Juniper JN0-364 Practice Test 39 - 10 Questions (Last Reviewed 11-Oct-2026)
- Juniper JN0-364 Practice Test 40 - 10 Questions (Last Reviewed 10-Oct-2026)
- Juniper JN0-364 Practice Test 41 - 10 Questions (Last Reviewed 09-Oct-2026)
- Juniper JN0-364 Practice Test 42 - 10 Questions (Last Reviewed 08-Oct-2026)
- Juniper JN0-364 Practice Test 43 - 10 Questions (Last Reviewed 07-Oct-2026)