Juniper JN0-364 Practice Test 30 - Prepaway
Practice Exams:

Pass Juniper JN0-364 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium File
$69.99 $76.99

JN0-364 Premium ETE File


  • Premium File 69 Questions & Answers. Last Update: Nov 17, 2026
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Juniper JN0-364 Practice Test 30

Question 290

A fictional Junos service-provider engineer encounters this scenario: An installer finds a customer-facing edge port disabled after attaching a small downstream Ethernet switch and assumes a damaged fiber transceiver. Distinguishing evidence: Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error. Which bounded approval scope avoids unintended changes to other provider or customer services?

  1. Approve only the bounded change (Validate whether the port must be a genuine edge-facing endpoint and preserve or redesign BPDU protection under approved topology changes.) after independently checking (The approved access segment forwards safely while a repeat unauthorized BPDU test triggers the intended control with an audit trail.), without quietly widening the provider or customer network scope.
  2. Approve only the bounded change (Inspect spanning-tree interface states, alternate paths and convergence behavior and tune only supported Layer 2 features within the validated topology.) after independently checking (A link failover test shows stable alternate Layer 2 forwarding without persistent loops and unchanged unrelated BGP routing.), without quietly widening the provider or customer network scope.
  3. Approve only the bounded change (Verify the intended root and edge-port topology, then apply supported root protection on the authorized boundary and restore correct bridge priority.) after independently checking (The provider bridge remains legitimate root and a controlled superior-BPDU test is contained without permanent loop formation.), without quietly widening the provider or customer network scope.
  4. Approve only the bounded change (Verify the handoff contract and bridge interface port mode, then restore only the intended tag treatment and VLAN membership.) after independently checking (The customer CE exchanges untagged frames successfully without gaining access to other wholesale service VLANs.), without quietly widening the provider or customer network scope.

Answer and Explanation

Correct Answer: A

A.

The bounded proposal is: Approve only the bounded change (Validate whether the port must be a genuine edge-facing endpoint and preserve or redesign BPDU protection under approved topology changes.) after independently checking (The approved access segment forwards safely while a repeat unauthorized BPDU test triggers the intended control with an audit trail.), without quietly widening the provider or customer network scope. The separate acceptance measure remains: The approved access segment forwards safely while a repeat unauthorized BPDU test triggers the intended control with an audit trail.

B.

Another proposed approval would approve only the bounded change (Inspect spanning-tree interface states, alternate paths and convergence behavior and tune only supported Layer 2 features within the validated topology.) after independently checking (A link failover test shows stable alternate Layer 2 forwarding without persistent loops and unchanged unrelated BGP routing.), without quietly widening the provider or customer network scope. The present scope must instead be justified by Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error.

C.

A separate release decision would approve only the bounded change (Verify the intended root and edge-port topology, then apply supported root protection on the authorized boundary and restore correct bridge priority.) after independently checking (The provider bridge remains legitimate root and a controlled superior-BPDU test is contained without permanent loop formation.), without quietly widening the provider or customer network scope. It does not match the current change: Validate whether the port must be a genuine edge-facing endpoint and preserve or redesign BPDU protection under approved topology changes.

D.

An alternative approval would approve only the bounded change (Verify the handoff contract and bridge interface port mode, then restore only the intended tag treatment and VLAN membership.) after independently checking (The customer CE exchanges untagged frames successfully without gaining access to other wholesale service VLANs.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error and the approved access segment forwards safely while a repeat unauthorized BPDU test triggers the intended control with an audit trail, respectively.

Question 291

A fictional Junos service-provider engineer encounters this scenario: A provider switching ring is designed to use different forwarding paths for two service VLAN groups but both services unexpectedly select one blocked uplink. Distinguishing evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. Which specific bounded Junos routing or switching correction best addresses this service-provider issue?

  1. Bounded remedy: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.
  2. Bounded remedy: Check LDP session transport, adjacency and matching labeled next hops before choosing a narrow protocol or underlay correction.
  3. Bounded remedy: Verify the intended root and edge-port topology, then apply supported root protection on the authorized boundary and restore correct bridge priority.
  4. Bounded remedy: Inspect spanning-tree interface states, alternate paths and convergence behavior and tune only supported Layer 2 features within the validated topology.

Answer and Explanation

Correct Answer: A

A.

The issue turns on MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. The relevant rule is that MSTP carries multiple VLANs in controlled spanning-tree instances and requires consistent region configuration. The targeted correction is: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.

B.

Another proposed action is: Check LDP session transport, adjacency and matching labeled next hops before choosing a narrow protocol or underlay correction. It targets a different dependency; the evidence here is MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

C.

Another option proposes: Verify the intended root and edge-port topology, then apply supported root protection on the authorized boundary and restore correct bridge priority. The specific correction is: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants. The deciding evidence is: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

D.

That alternative concerns: Inspect spanning-tree interface states, alternate paths and convergence behavior and tune only supported Layer 2 features within the validated topology. The relevant evidence is MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. The corresponding fix is: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.

Question 292

A fictional Junos service-provider engineer encounters this scenario: A provider switching ring is designed to use different forwarding paths for two service VLAN groups but both services unexpectedly select one blocked uplink. Which observed operational evidence most strongly isolates the actual protocol or forwarding condition?

  1. Differentiating observation: Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable.
  2. Differentiating observation: RSTP operational detail shows the new attachment advertising superior BPDUs and becoming root instead of the designated provider bridge.
  3. Differentiating observation: Label binding and forwarding entries on adjacent devices show inconsistent outgoing and expected incoming values for the affected path segment.
  4. Differentiating observation: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

Answer and Explanation

Correct Answer: D

A.

Another piece of evidence concerns Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable. The current incident instead shows: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. This distinction supports the action: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.

B.

Another alternative would address RSTP operational detail shows the new attachment advertising superior BPDUs and becoming root instead of the designated provider bridge as decisive. The actual evidence in this case is MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

C.

This other option describes: Label binding and forwarding entries on adjacent devices show inconsistent outgoing and expected incoming values for the affected path segment. The problem to explain is different: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

D.

The record points to MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. After confirming the clue, the appropriate response is: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.

Question 293

A fictional Junos service-provider engineer encounters this scenario: A provider switching ring is designed to use different forwarding paths for two service VLAN groups but both services unexpectedly select one blocked uplink. Distinguishing evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. Which Junos networking principle best explains the relevant engineering decision?

  1. Applicable protocol principle: RSVP signaling requires feasible path constraints and available resources, distinct from ordinary IP route reachability. Evidence for this case: RSVP session state and explicit path display show an outdated strict hop, while IGP reachability has already moved to a different core next hop.
  2. Applicable protocol principle: MSTP carries multiple VLANs in controlled spanning-tree instances and requires consistent region configuration. Evidence for this case: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.
  3. Applicable protocol principle: RSTP convergence depends on port roles, BPDU exchange and a loop-free alternate topology. Evidence for this case: Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable.
  4. Applicable protocol principle: Spanning-tree BPDU protection is a deliberate safety mechanism against unexpected bridge advertisements. Evidence for this case: Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error.

Answer and Explanation

Correct Answer: B

A.

A different principle is: RSVP signaling requires feasible path constraints and available resources, distinct from ordinary IP route reachability. Evidence for this case: RSVP session state and explicit path display show an outdated strict hop, while IGP reachability has already moved to a different core next hop. The present evidence, however, is MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. The relevant rule is: MSTP carries multiple VLANs in controlled spanning-tree instances and requires consistent region configuration.

B.

The relevant principle is: MSTP carries multiple VLANs in controlled spanning-tree instances and requires consistent region configuration. The case evidence is MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. The practical response is: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.

C.

The competing option invokes: RSTP convergence depends on port roles, BPDU exchange and a loop-free alternate topology. Evidence for this case: Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable. The present evidence is: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. The case-relevant principle is: MSTP carries multiple VLANs in controlled spanning-tree instances and requires consistent region configuration.

D.

That principle concerns another fact pattern: Spanning-tree BPDU protection is a deliberate safety mechanism against unexpected bridge advertisements. Evidence for this case: Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error. Here the key fact is: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

Question 294

A fictional Junos service-provider engineer encounters this scenario: A provider switching ring is designed to use different forwarding paths for two service VLAN groups but both services unexpectedly select one blocked uplink. Intended bounded correction: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants. Which independently verifiable test best demonstrates the intended correction worked?

  1. Independent verification: The MPLS-aware path test and customer service probes agree on a working labeled route without masking unresolved transport problems.
  2. Independent verification: The approved access segment forwards safely while a repeat unauthorized BPDU test triggers the intended control with an audit trail.
  3. Independent verification: A link failover test shows stable alternate Layer 2 forwarding without persistent loops and unchanged unrelated BGP routing.
  4. Independent verification: Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.

Answer and Explanation

Correct Answer: D

A.

That result would assess another condition: The MPLS-aware path test and customer service probes agree on a working labeled route without masking unresolved transport problems. The correct criterion is directly linked to the finding: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

B.

Another proposed result is: The approved access segment forwards safely while a repeat unauthorized BPDU test triggers the intended control with an audit trail. It would not independently establish the required outcome: Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.

C.

A different option checks: A link failover test shows stable alternate Layer 2 forwarding without persistent loops and unchanged unrelated BGP routing. The case-specific acceptance condition is instead Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.

D.

The independent verification condition is: Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure. That result checks whether the original evidence—MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration—has been addressed.

Question 295

A fictional Junos service-provider engineer encounters this scenario: A provider switching ring is designed to use different forwarding paths for two service VLAN groups but both services unexpectedly select one blocked uplink. Distinguishing evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. Which material service-availability, routing, switching or security risk most directly needs control?

  1. Meaningful operational caution: Treating every interruption as a routing protocol failure can destabilize healthy control planes and leave a Layer 2 root cause unresolved.
  2. Meaningful operational caution: Editing MSTP instance mappings without confirming region consistency can cause boundary behavior and a wider service outage.
  3. Meaningful operational caution: Blindly disabling BPDU protection on an untrusted edge can open the switching domain to loops and root manipulation.
  4. Meaningful operational caution: An established BGP TCP session does not guarantee every requested network layer address family is negotiated.

Answer and Explanation

Correct Answer: B

A.

Another caution is: Treating every interruption as a routing protocol failure can destabilize healthy control planes and leave a Layer 2 root cause unresolved. The key risk in this case is: Editing MSTP instance mappings without confirming region consistency can cause boundary behavior and a wider service outage.

B.

A necessary safeguard is: Editing MSTP instance mappings without confirming region consistency can cause boundary behavior and a wider service outage. The proposed correction remains: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.

C.

This limitation concerns another setting: Blindly disabling BPDU protection on an untrusted edge can open the switching domain to loops and root manipulation. The observed facts here make a different caution decisive: Editing MSTP instance mappings without confirming region consistency can cause boundary behavior and a wider service outage.

D.

Another caution is: An established BGP TCP session does not guarantee every requested network layer address family is negotiated. The key risk in this case is: Editing MSTP instance mappings without confirming region consistency can cause boundary behavior and a wider service outage.

Question 296

A fictional Junos service-provider engineer encounters this scenario: A provider switching ring is designed to use different forwarding paths for two service VLAN groups but both services unexpectedly select one blocked uplink. Distinguishing evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. Which focused investigation is the most useful before modifying the network configuration?

  1. Focused Junos investigation: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable.
  2. Focused Junos investigation: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error.
  3. Focused Junos investigation: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.
  4. Focused Junos investigation: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: The route table has the destination IP, but MPLS forwarding-table inspection lacks the expected incoming label operation on the affected transit router.

Answer and Explanation

Correct Answer: C

A.

That check concerns a different signal: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable. The case-relevant check is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

B.

Another check would compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error. The case observation to isolate is MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. The focused check here is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

C.

The focused investigation should compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. It is tied to the observed evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. It tests the conditions for this response: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.

D.

That check concerns a different signal: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: The route table has the destination IP, but MPLS forwarding-table inspection lacks the expected incoming label operation on the affected transit router. The case-relevant check is: Compare active Junos routing, protocol and forwarding displays with this differentiating observed evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

Question 297

A fictional Junos service-provider engineer encounters this scenario: A provider switching ring is designed to use different forwarding paths for two service VLAN groups but both services unexpectedly select one blocked uplink. Distinguishing evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. Which controlled operational implementation sequence best protects the related provider service?

  1. Controlled engineering sequence: First verify the observed failure (Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable.); review and authorize the bounded correction (Inspect spanning-tree interface states, alternate paths and convergence behavior and tune only supported Layer 2 features within the validated topology.); then independently verify the intended outcome (A link failover test shows stable alternate Layer 2 forwarding without persistent loops and unchanged unrelated BGP routing.) before production rollout.
  2. Controlled engineering sequence: First verify the observed failure (MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.); review and authorize the bounded correction (Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.); then independently verify the intended outcome (Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.) before production rollout.
  3. Controlled engineering sequence: First verify the observed failure (Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error.); review and authorize the bounded correction (Validate whether the port must be a genuine edge-facing endpoint and preserve or redesign BPDU protection under approved topology changes.); then independently verify the intended outcome (The approved access segment forwards safely while a repeat unauthorized BPDU test triggers the intended control with an audit trail.) before production rollout.
  4. Controlled engineering sequence: First verify the observed failure (Tunnel interface and IPv4 underlay checks show an obsolete remote endpoint while the IPv6 routes point toward the tunnel logical interface.); review and authorize the bounded correction (Verify reachable IPv4 tunnel endpoints, permitted encapsulation and the specific IPv6 routing path before correcting endpoint configuration.); then independently verify the intended outcome (Encapsulated IPv6 traffic reaches the remote island with expected IPv4 outer endpoints and a tested return route.) before production rollout.

Answer and Explanation

Correct Answer: B

A.

Another action-and-check pairing is: First verify the observed failure (Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable.); review and authorize the bounded correction (Inspect spanning-tree interface states, alternate paths and convergence behavior and tune only supported Layer 2 features within the validated topology.); then independently verify the intended outcome (A link failover test shows stable alternate Layer 2 forwarding without persistent loops and unchanged unrelated BGP routing.) before production rollout. The evidence here is MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. The required action and proof are Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants and Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.

B.

The correction is Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants. The matching proof is Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure. Both address the finding that MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

C.

Another possible combination is: First verify the observed failure (Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error.); review and authorize the bounded correction (Validate whether the port must be a genuine edge-facing endpoint and preserve or redesign BPDU protection under approved topology changes.); then independently verify the intended outcome (The approved access segment forwards safely while a repeat unauthorized BPDU test triggers the intended control with an audit trail.) before production rollout. The current record instead supports Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants, verified by Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.

D.

Another potential sequence is: First verify the observed failure (Tunnel interface and IPv4 underlay checks show an obsolete remote endpoint while the IPv6 routes point toward the tunnel logical interface.); review and authorize the bounded correction (Verify reachable IPv4 tunnel endpoints, permitted encapsulation and the specific IPv6 routing path before correcting endpoint configuration.); then independently verify the intended outcome (Encapsulated IPv6 traffic reaches the remote island with expected IPv4 outer endpoints and a tested return route.) before production rollout. It has no direct link to the distinguishing evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

Question 298

A fictional Junos service-provider engineer encounters this scenario: A provider switching ring is designed to use different forwarding paths for two service VLAN groups but both services unexpectedly select one blocked uplink. Distinguishing evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. Which set of evidence, limited change and independent validation best justifies authorization?

  1. Approval package: observed evidence (The penultimate node advertises implicit-null behavior and forwarding views show a legitimate penultimate-hop-pop operation for the relevant LSP.), limited correction (Confirm expected label advertisement and pop operation at the penultimate hop rather than forcing unnecessary labels through every device.), independently measurable result (Captured traffic and destination forwarding demonstrate correct reachability with expected label disposition at each hop.).
  2. Approval package: observed evidence (Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable.), limited correction (Inspect spanning-tree interface states, alternate paths and convergence behavior and tune only supported Layer 2 features within the validated topology.), independently measurable result (A link failover test shows stable alternate Layer 2 forwarding without persistent loops and unchanged unrelated BGP routing.).
  3. Approval package: observed evidence (RSTP operational detail shows the new attachment advertising superior BPDUs and becoming root instead of the designated provider bridge.), limited correction (Verify the intended root and edge-port topology, then apply supported root protection on the authorized boundary and restore correct bridge priority.), independently measurable result (The provider bridge remains legitimate root and a controlled superior-BPDU test is contained without permanent loop formation.).
  4. Approval package: observed evidence (MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.), limited correction (Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.), independently measurable result (Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.).

Answer and Explanation

Correct Answer: D

A.

Another approval package concerns: Observed evidence (The penultimate node advertises implicit-null behavior and forwarding views show a legitimate penultimate-hop-pop operation for the relevant LSP.), limited correction (Confirm expected label advertisement and pop operation at the penultimate hop rather than forcing unnecessary labels through every device.), independently measurable result (Captured traffic and destination forwarding demonstrate correct reachability with expected label disposition at each hop.). The present scope must instead be justified by MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

B.

An alternative release decision is: Observed evidence (Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable.), limited correction (Inspect spanning-tree interface states, alternate paths and convergence behavior and tune only supported Layer 2 features within the validated topology.), independently measurable result (A link failover test shows stable alternate Layer 2 forwarding without persistent loops and unchanged unrelated BGP routing.). It does not match the current change: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.

C.

Another approval action is: Observed evidence (RSTP operational detail shows the new attachment advertising superior BPDUs and becoming root instead of the designated provider bridge.), limited correction (Verify the intended root and edge-port topology, then apply supported root protection on the authorized boundary and restore correct bridge priority.), independently measurable result (The provider bridge remains legitimate root and a controlled superior-BPDU test is contained without permanent loop formation.). The relevant evidence and acceptance are MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration and Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure, respectively.

D.

The change-control boundary is: Observed evidence (MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.), limited correction (Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.), independently measurable result (Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.). The evidence for this scope is MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

Question 299

A fictional Junos service-provider engineer encounters this scenario: A provider switching ring is designed to use different forwarding paths for two service VLAN groups but both services unexpectedly select one blocked uplink. Distinguishing evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. If the change fails its expected acceptance test, which controlled recovery approach is most appropriate?

  1. If testing fails: pause changes, preserve the differentiating evidence (MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.), restore the last approved safe network state and reassess mstp instance mapping creates an unexpected blocked path.
  2. If testing fails: pause changes, preserve the differentiating evidence (Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error.), restore the last approved safe network state and reassess bpdu protection disables an unexpected access port.
  3. If testing fails: pause changes, preserve the differentiating evidence (Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable.), restore the last approved safe network state and reassess rstp convergence is blamed on an unrelated route policy.
  4. If testing fails: pause changes, preserve the differentiating evidence (Bridge-domain membership reveals two customer-facing interfaces accidentally attached to one virtual switch despite separate service contracts.), restore the last approved safe network state and reassess bridge domain configuration allows duplicate customer identifiers.

Answer and Explanation

Correct Answer: A

A.

A contingency plan would pause changes, preserve the differentiating evidence (MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.), restore the last approved safe network state and reassess mstp instance mapping creates an unexpected blocked path. This preserves control of the change linked to MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

B.

Another recovery route would pause changes, preserve the differentiating evidence (Port diagnostics show a BPDU-protection event as the cause of the interface state transition rather than an optical error.), restore the last approved safe network state and reassess bpdu protection disables an unexpected access port. It does not preserve the condition of this case: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. The bounded fallback is: Pause changes, preserve the differentiating evidence (MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.), restore the last approved safe network state and reassess mstp instance mapping creates an unexpected blocked path.

C.

Another option proposes: Pause changes, preserve the differentiating evidence (Layer 2 logs show RSTP topology change and port role transition while BGP sessions remain established and their route tables are stable.), restore the last approved safe network state and reassess rstp convergence is blamed on an unrelated route policy. Its assumptions differ from the observed failure; the appropriate recovery is: Pause changes, preserve the differentiating evidence (MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.), restore the last approved safe network state and reassess mstp instance mapping creates an unexpected blocked path.

D.

Another fallback concerns pausing changes, preserve the differentiating evidence (Bridge-domain membership reveals two customer-facing interfaces accidentally attached to one virtual switch despite separate service contracts.), restore the last approved safe network state and reassess bridge domain configuration allows duplicate customer identifiers. The current change concerns MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration.

Question 300

A fictional Junos service-provider engineer encounters this scenario: A provider switching ring is designed to use different forwarding paths for two service VLAN groups but both services unexpectedly select one blocked uplink. Distinguishing evidence: MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration. Which bounded approval scope avoids unintended changes to other provider or customer services?

  1. Approve only the bounded change (Validate interface family inet6, OSPFv3 topology and policy controlling IPv6 reachability before modifying the relevant scope.) after independently checking (The advertised customer IPv6 prefix installs in the intended table and a scoped IPv6 path test completes with correct next-hop resolution.), without quietly widening the provider or customer network scope.
  2. Approve only the bounded change (Verify the intended root and edge-port topology, then apply supported root protection on the authorized boundary and restore correct bridge priority.) after independently checking (The provider bridge remains legitimate root and a controlled superior-BPDU test is contained without permanent loop formation.), without quietly widening the provider or customer network scope.
  3. Approve only the bounded change (Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.) after independently checking (Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.), without quietly widening the provider or customer network scope.
  4. Approve only the bounded change (Validate whether the port must be a genuine edge-facing endpoint and preserve or redesign BPDU protection under approved topology changes.) after independently checking (The approved access segment forwards safely while a repeat unauthorized BPDU test triggers the intended control with an audit trail.), without quietly widening the provider or customer network scope.

Answer and Explanation

Correct Answer: C

A.

A separate release decision would approve only the bounded change (Validate interface family inet6, OSPFv3 topology and policy controlling IPv6 reachability before modifying the relevant scope.) after independently checking (The advertised customer IPv6 prefix installs in the intended table and a scoped IPv6 path test completes with correct next-hop resolution.), without quietly widening the provider or customer network scope. It does not match the current change: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.

B.

An alternative approval would approve only the bounded change (Verify the intended root and edge-port topology, then apply supported root protection on the authorized boundary and restore correct bridge priority.) after independently checking (The provider bridge remains legitimate root and a controlled superior-BPDU test is contained without permanent loop formation.), without quietly widening the provider or customer network scope. The relevant evidence and acceptance are MSTP instance membership and region parameters show the second VLAN mapped into the first spanning-tree instance and mismatched neighboring regional configuration and Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure, respectively.

C.

The bounded proposal is: Approve only the bounded change (Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.) after independently checking (Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.), without quietly widening the provider or customer network scope. The separate acceptance measure remains: Per-instance operational port states match approved paths and both service VLAN groups retain loop-free reachability during a controlled link failure.

D.

A separate release decision would approve only the bounded change (Validate whether the port must be a genuine edge-facing endpoint and preserve or redesign BPDU protection under approved topology changes.) after independently checking (The approved access segment forwards safely while a repeat unauthorized BPDU test triggers the intended control with an audit trail.), without quietly widening the provider or customer network scope. It does not match the current change: Confirm the authorized MSTP region, instance mappings and topology design, then align the relevant VLAN-to-instance definitions across participants.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests