Pass HP HPE7-A08 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
HP HPE7-A08 Practice Test 80
Question 790
In a regional network operations center, engineers discover during a packet loss fault isolation that a new Central configuration template removes an approved uplink VLAN from a fleet of branches at once. The project must protect approved network access while addressing the specific cause. After remediation, which test result proves the original fault has been corrected?
Explanation
Correct Answer
Pilot devices regain approved VLANs and fleet remains consistent after controlled rollout. Change history ties the outage to one Central group revision affecting multiple switches, which must differ from the measured post-change state.
Incorrect Answers
Neighbor returns to full state and expected routes remain while unauthorized sessions fail. Change history ties the outage to one Central group revision affecting multiple switches, which must differ from the measured post-change state. Pilot devices regain approved VLANs and fleet remains consistent after controlled rollout.
“Registered phone receives intended voice policy and ordinary user roles remain isolated” does not explain the observed failure: change history ties the outage to one Central group revision affecting multiple switches, which must differ from the measured post-change state. Pilot devices regain approved VLANs and fleet remains consistent after controlled rollout.
“Link comes up at the approved common speed and forwards under representative load” concerns a different part of the problem. Change history ties the outage to one Central group revision affecting multiple switches, which must differ from the measured post-change state. Pilot devices regain approved VLANs and fleet remains consistent after controlled rollout.
Question 791
During a configuration drift review for an enterprise change control council, a fault trace confirms that a switch configuration API client uses global administrator credentials for a read only inventory reporting job. The team needs a supported change with independently measurable acceptance evidence. The diagnostic trace is authorization log shows a reporting token permitted to modify routing and interface state. Which intervention paired with its proof closes this exact failure?
Explanation
Correct Answer
Apply scoped access credentials and test least privilege for the API automation identity. Verify that reporting API reads succeed and unauthorized configuration writes are rejected and logged. Automation privileges should be limited to operations actually required. Authorization log shows a reporting token permitted to modify routing and interface state, and the pair must correct that exact failure.
Incorrect Answers
Route state remains stable across a monitored interval and redundant path convergence is validated. The required validation is different: reporting API reads succeed and unauthorized configuration writes are rejected and logged. Apply scoped access credentials and test least privilege for the API automation identity.
Rerunning the automation converges to one intended object and stable running state. It would not verify that reporting API reads succeed and unauthorized configuration writes are rejected and logged. Authorization log shows a reporting token permitted to modify routing and interface state, and the pair must correct that exact failure.
Reporting API reads succeed and unauthorized configuration writes are rejected and logged. To correct the reported problem, apply scoped access credentials and test least privilege for the API automation identity. Automation privileges should be limited to operations actually required.
Question 792
In a multisite service assurance team, engineers discover during a routing and performance escalation that a long fiber uplink stays up but receives CRC and FCS errors that lower effective throughput. The project must protect approved network access while addressing the specific cause. Which response directly addresses the reported switching issue without bypassing policy?
Explanation
Correct Answer
Inspect optic receive levels connector cleanliness and physical media quality before changing QoS. The result link carries sustained traffic without CRC error growth after optical remediation specifically tests the reported fault. Interface CRC FCS error counters increase at the same times as application retries, making inspect optic receive levels connector cleanliness and physical media quality before changing QoS more relevant than changes aimed at neighboring features.
Incorrect Answers
“Restore correct voice classification and egress scheduling at bottleneck ports” concerns a different part of the problem. Interface CRC FCS error counters increase at the same times as application retries, making inspect optic receive levels connector cleanliness and physical media quality before changing QoS more relevant than changes aimed at neighboring features. Inspect optic receive levels connector cleanliness and physical media quality before changing QoS.
The result link carries sustained traffic without CRC error growth after optical remediation specifically tests the reported fault. Interface CRC FCS error counters increase at the same times as application retries, making inspect optic receive levels connector cleanliness and physical media quality before changing QoS more relevant than changes aimed at neighboring features. The proposed action “Reclassify traffic at trust boundary and validate queue congestion and application effects” would not resolve that situation. Inspect optic receive levels connector cleanliness and physical media quality before changing QoS.
Inspecting optical receive power connectors and fiber path for attenuation and repair the physical cause would not resolve the observed failure: interface CRC FCS error counters increase at the same times as application retries, making inspect optic receive levels connector cleanliness and physical media quality before changing QoS more relevant than changes aimed at neighboring features. The result link carries sustained traffic without CRC error growth after optical remediation specifically tests the reported fault. Inspect optic receive levels connector cleanliness and physical media quality before changing QoS.
Question 793
In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an Aruba Central deployment imports a switch record with an incorrect hardware identifier and expects it to join the right site. The project must protect approved network access while addressing the specific cause. What measurable result best demonstrates recovery without creating a new access exposure?
Explanation
Correct Answer
The actual switch appears managed in the intended organization group and site. Cloud switch onboarding must match real inventory identity and entitlements. Central inventory shows an expected switch offline while the physical serial differs from the imported record, which must differ from the measured post-change state. In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an Aruba Central deployment imports a switch record with an incorrect hardware identifier and expects it to join the right site.
Incorrect Answers
Post synchronization device running configuration retains the authorized interface intent. Central inventory shows an expected switch offline while the physical serial differs from the imported record, which must differ from the measured post-change state. The actual switch appears managed in the intended organization group and site.
Running switch policy matches branch requirements and unauthorized VLAN traffic fails would not resolve the observed failure: central inventory shows an expected switch offline while the physical serial differs from the imported record, which must differ from the measured post-change state. The actual switch appears managed in the intended organization group and site.
Validated overlay endpoints exchange permitted traffic with working underlay and control plane. Addresses another workflow. Central inventory shows an expected switch offline while the physical serial differs from the imported record, which must differ from the measured post-change state. The actual switch appears managed in the intended organization group and site.
Question 794
During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that an architect proposes a campus edge switch for a data center leaf fabric requiring high capacity east west forwarding. The team needs a supported change with independently measurable acceptance evidence. The diagnostic trace is fabric design requires dense high speed server ports unavailable on the proposed access hardware. Which combined corrective action and matching validation best meets the objective?
Explanation
Correct Answer
Compare data center capable Aruba CX platforms and supported fabric features with the leaf requirements. Verify that selected platform supports validated leaf uplinks server density and fabric feature requirements. Fabric design requires dense high speed server ports unavailable on the proposed access hardware, and the pair must correct that exact failure. During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that an architect proposes a campus edge switch for a data center leaf fabric requiring high capacity east west forwarding.
Incorrect Answers
Selected platform supports validated leaf uplinks server density and fabric feature requirements. To correct the reported problem, compare data center capable Aruba CX platforms and supported fabric features with the leaf requirements. During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that an architect proposes a campus edge switch for a data center leaf fabric requiring high capacity east west forwarding.
Topology tests preserve reachability without a forwarding loop during link changes. The required validation is different: selected platform supports validated leaf uplinks server density and fabric feature requirements. During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that an architect proposes a campus edge switch for a data center leaf fabric requiring high. Compare data center capable Aruba CX platforms and supported fabric features with the leaf requirements.
Tested core design meets projected port throughput resiliency and supported software requirements. It would not verify that selected platform supports validated leaf uplinks server density and fabric feature requirements. Fabric design requires dense high speed server ports unavailable on the proposed access hardware, and the pair must correct that exact failure.
Question 795
In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an access team enables MAC based fallback for printers yet places all fallback clients in unrestricted employee VLAN. The project must protect approved network access while addressing the specific cause. The diagnostic trace is printer and an unauthorized device receive the same broad access when 802.1X fails. Which combined corrective action and matching validation best meets the objective?
Explanation
Correct Answer
Apply constrained device policy and validate MAC authentication fallback for non 802.1X equipment. Verify that known printer functions within limited access and unknown MACs do not gain unrestricted connectivity. Printer and an unauthorized device receive the same broad access when 802. In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an access team enables MAC based fallback for printers yet places all fallback clients in unrestricted employee VLAN.
Incorrect Answers
Known printer functions within limited access and unknown MACs do not gain unrestricted connectivity. To correct the reported problem, apply constrained device policy and validate MAC authentication fallback for non 802.1X equipment. In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an access team enables MAC based fallback for printers yet places all fallback clients in unrestricted.
Selected users follow approved tunneled path and fail closed on policy or tunnel loss. It would not verify that known printer functions within limited access and unknown MACs do not gain unrestricted connectivity. Printer and an unauthorized device receive the same broad access when 802. In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an access team enables MAC based fallback for printers yet places all fallback clients in unrestricted.
Authorized test user receives intended role and policy enforcement is validated end to end. The required validation is different: known printer functions within limited access and unknown MACs do not gain unrestricted connectivity. Apply constrained device policy and validate MAC authentication fallback for non 802.1X equipment.
Question 796
In a manufacturing enterprise network architect, engineers discover during a secured plant-to-campus refresh that a WAN linked campus deployment schedules simultaneous routing changes at every site without rollback boundaries. The project must protect approved network access while addressing the specific cause. Which targeted configuration or design decision should the engineer take first?
Explanation
Correct Answer
Stage the switching change by failure domain with checkpoints and a tested recovery path. A controlled migration limits the blast radius of a failed network change. Migration runbook has no per site validation gates and no known good routing configuration, making stage the switching change by failure domain with checkpoints and a tested recovery path more relevant than changes aimed at neighboring features. Pilot and later site changes pass reachability tests with documented rollback completed in rehearsal.
Incorrect Answers
Mapping interface media and line rate requirements to supported transceiver and switch port capabilities would not resolve the observed failure: migration runbook has no per site validation gates and no known good routing configuration, making stage the switching change by failure domain with checkpoints and a tested recovery path more relevant than changes aimed at neighboring features. Stage the switching change by failure domain with checkpoints and a tested recovery path.
“Audit optical modules fiber type and reach for each proposed uplink prior to installation” concerns a different part of the problem. Migration runbook has no per site validation gates and no known good routing configuration, making stage the switching change by failure domain with checkpoints and a tested recovery path more relevant than changes aimed at neighboring features. Stage the switching change by failure domain with checkpoints and a tested recovery path.
A controlled migration limits the blast radius of a failed network change. Migration runbook has no per site validation gates and no known good routing configuration, making stage the switching change by failure domain with checkpoints and a tested recovery path more relevant than changes aimed at neighboring features. The proposed action “Translate business segmentation requirements into VLAN VRF and policy acceptance cases” would not resolve that situation. Stage the switching change by failure domain with checkpoints and a tested recovery path.
Question 797
During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that an engineer diagrams two aggregation switches but never validates host reachability during one device failure. The team needs a supported change with independently measurable acceptance evidence. Which evidence most specifically identifies this fault instead of a similar switch problem?
Explanation
Correct Answer
Design acceptance contains only steady state link up tests despite a high availability requirement. During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that an engineer diagrams two aggregation switches but never validates host reachability during one device failure.
Incorrect Answers
“Uplink schedule specifies fiber rate and optics that the proposed switch interface cannot support” does not demonstrate what is needed when during a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that an engineer diagrams two aggregation switches but never validates host reachability during one device failure. Design acceptance contains only steady state link up tests despite a high availability requirement.
“Device budget requires more watts than the selected access stack supplies at full load” does not explain the observed failure: during a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that an engineer diagrams two aggregation switches but never validates host reachability during one device failure. Design acceptance contains only steady state link up tests despite a high availability requirement.
“Subnet inventory identifies the same prefix on two independently routed interfaces” concerns a different part of the problem. During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that an engineer diagrams two aggregation switches but never validates host reachability during one device failure. Design acceptance contains only steady state link up tests despite a high availability requirement.
Question 798
During a high-availability implementation meeting for a regional hospital network change group, a fault trace confirms that a proposed floor rollout counts Ethernet ports but not the combined power draw of phones and wireless access points. The team needs a supported change with independently measurable acceptance evidence. What is the most defensible corrective implementation for this case?
Explanation
Correct Answer
Sum expected PoE consumption and choose access hardware and feeds with tested headroom. Power budget is a capacity constraint separate from interface count. Device budget requires more watts than the selected access stack supplies at full load, making sum expected PoE consumption and choose access hardware and feeds with tested headroom more relevant than changes aimed at neighboring features.
Incorrect Answers
The proposed step “Calculate traffic demand and plan redundant high speed uplinks before deploying the closet switches” would leave the problem unresolved: device budget requires more watts than the selected access stack supplies at full load, making sum expected PoE consumption and choose access hardware and feeds with tested headroom more relevant than changes aimed at neighboring features. Sum expected PoE consumption and choose access hardware and feeds with tested headroom.
“Match compact campus access switch capacity and uplink ports to actual branch demand” does not explain the observed failure: device budget requires more watts than the selected access stack supplies at full load, making sum expected PoE consumption and choose access hardware and feeds with tested headroom more relevant than changes aimed at neighboring features. Power budget is a capacity constraint separate from interface count. Sum expected PoE consumption and choose access hardware and feeds with tested headroom.
Creating a failover test plan for the selected redundancy technology and critical client services addresses a separate aspect of the case. Device budget requires more watts than the selected access stack supplies at full load, making sum expected PoE consumption and choose access hardware and feeds with tested headroom more relevant than changes aimed at neighboring features. Sum expected PoE consumption and choose access hardware and feeds with tested headroom.
Question 799
During an AOS-CX configuration rollout for a campus access deployment group, a fault trace confirms that a switch QoS policy gives excessive strict priority to a busy traffic class and other service queues show sustained drops. The team needs a supported change with independently measurable acceptance evidence. The diagnostic trace is output queue counters show one queue saturating while another class experiences starvation. Which change-and-test combination would you approve for the affected network?
Explanation
Correct Answer
Rebalance scheduler allocation and classification using measured SLA needs. Verify that latency sensitive traffic and business data remain within measured delay and loss targets. Output queue counters show one queue saturating while another class experiences starvation, and the pair must correct that exact failure. During an AOS-CX configuration rollout for a campus access deployment group, a fault trace confirms that a switch QoS policy gives excessive strict priority to a busy traffic class and other service queues show sustained drops.
Incorrect Answers
Running switch policy matches branch requirements and unauthorized VLAN traffic fails. The required validation is different: latency sensitive traffic and business data remain within measured delay and loss targets. Rebalance scheduler allocation and classification using measured SLA needs.
Voice packets retain authorized priority while untrusted bulk traffic uses normal queues. It would not verify that latency sensitive traffic and business data remain within measured delay and loss targets. Output queue counters show one queue saturating while another class experiences starvation, and the pair must correct that exact failure.
Latency sensitive traffic and business data remain within measured delay and loss targets. To correct the reported problem, rebalance scheduler allocation and classification using measured SLA needs. During an AOS-CX configuration rollout for a campus access deployment group, a fault trace confirms that a switch QoS policy gives excessive strict priority to a busy traffic class and other service queues show sustained drops.
Question 800
In a multisite service assurance team, engineers discover during a routing and performance escalation that a call center reports jitter after a policy change because telephone RTP flows no longer receive expected QoS markings. The project must protect approved network access while addressing the specific cause. Which response directly addresses the reported switching issue without bypassing policy?
Explanation
Correct Answer
Restore correct voice classification and egress scheduling at bottleneck ports. Latency sensitive flows need end to end consistent QoS treatment. Packet captures show unmarked voice flows and egress drops in best effort queues, making restore correct voice classification and egress scheduling at bottleneck ports more relevant than changes aimed at neighboring features.
Incorrect Answers
Applying a tested least privilege outage policy with redundant authentication service paths would not resolve the observed failure: packet captures show unmarked voice flows and egress drops in best effort queues, making restore correct voice classification and egress scheduling at bottleneck ports more relevant than changes aimed at neighboring features. Restore correct voice classification and egress scheduling at bottleneck ports.
Measuring endpoint interface and host performance before expanding network infrastructure is not a direct response to the evidence: packet captures show unmarked voice flows and egress drops in best effort queues, making restore correct voice classification and egress scheduling at bottleneck ports more relevant than changes aimed at neighboring features. Restore correct voice classification and egress scheduling at bottleneck ports.
Latency sensitive flows need end to end consistent QoS treatment. Packet captures show unmarked voice flows and egress drops in best effort queues, making restore correct voice classification and egress scheduling at bottleneck ports more relevant than changes aimed at neighboring features. Inspecting egress queue drops and sample traffic at burst resolution to adjust buffering or capacity alone cannot establish that the failure is corrected. Restore correct voice classification and egress scheduling at bottleneck ports.
HPE Network Switching Professional (HPE7-A08) Practice Tests
- HP HPE7-A08 Practice Test 78 - 10 Questions (Last Reviewed 01-Nov-2026)
- HP HPE7-A08 Practice Test 79 - 10 Questions (Last Reviewed 31-Oct-2026)
- HP HPE7-A08 Practice Test 80 - 10 Questions (Last Reviewed 30-Oct-2026)
- HP HPE7-A08 Practice Test 81 - 10 Questions (Last Reviewed 29-Oct-2026)
- HP HPE7-A08 Practice Test 82 - 10 Questions (Last Reviewed 28-Oct-2026)
