HP HPE7-A08 Practice Test 73 - Prepaway
Practice Exams:

Pass HP HPE7-A08 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$14.99
$74.99 $89.98

HPE7-A08 Premium Bundle


  • Premium File 172 Questions & Answers. Last update: Nov 21, 2026
  • Study Guide 794 Pages

HP HPE7-A08 Practice Test 73

Question 720

During a device commissioning session for a multi-site Aruba switching engineering team, a fault trace confirms that a distribution layer installs two Aruba CX peers but treats them as one logical chassis without establishing supported VSX peer and keepalive design. The team needs a supported change with independently measurable acceptance evidence. The diagnostic trace is redundancy plan references a shared logical control plane although switch peer configuration is absent. Which change-and-test combination would you approve for the affected network?

  1. verify gateway address resolution routed underlay and tunnel settings for dynamic segmentation — verify: validated VSX pair maintains intended dual homed connectivity through tested single peer failure
  2. apply constrained device policy and validate MAC authentication fallback for non 802.1X equipment — verify: known printer functions within limited access and unknown MACs do not gain unrestricted connectivity
  3. design supported VSX inter switch links keepalive and dual homed forwarding before deployment — verify: validated VSX pair maintains intended dual homed connectivity through tested single peer failure
  4. design supported VSX inter switch links keepalive and dual homed forwarding before deployment — verify: an induced test alarm reaches the correct site queue with accurate device identity

Explanation

Correct Answer

C:

Design supported VSX inter switch links keepalive and dual homed forwarding before deployment. Verify that validated VSX pair maintains intended dual homed connectivity through tested single peer failure. Redundancy plan references a shared logical control plane although switch peer configuration is absent, and the pair must correct that exact failure. During a device commissioning session for a multi-site Aruba switching engineering team, a fault trace confirms that a distribution layer installs two Aruba CX peers but treats them as one logical chassis without.

Incorrect Answers

A:

Validated VSX pair maintains intended dual homed connectivity through tested single peer failure. To correct the reported problem, design supported VSX inter switch links keepalive and dual homed forwarding before deployment. During a device commissioning session for a multi-site Aruba switching engineering team, a fault trace confirms that a distribution layer installs two Aruba CX peers but treats them as one logical chassis without establishing supported VSX peer and keepalive design.

B:

Known printer functions within limited access and unknown MACs do not gain unrestricted connectivity. The required validation is different: validated VSX pair maintains intended dual homed connectivity through tested single peer failure. Design supported VSX inter switch links keepalive and dual homed forwarding before deployment.

D:

An induced test alarm reaches the correct site queue with accurate device identity. It would not verify that validated VSX pair maintains intended dual homed connectivity through tested single peer failure. Redundancy plan references a shared logical control plane although switch peer configuration is absent, and the pair must correct that exact failure.

Question 721

In a managed LAN engineering contractor, engineers discover during a wired network handoff audit that a switch QoS policy gives excessive strict priority to a busy traffic class and other service queues show sustained drops. The project must protect approved network access while addressing the specific cause. Which evidence most specifically identifies this fault instead of a similar switch problem?

  1. queue statistics show ordinary workstation flows entering the high priority voice queue
  2. module port reports unsupported breakout mode and none of its child links come up
  3. output queue counters show one queue saturating while another class experiences starvation
  4. interface telemetry shows drops only at WAN egress while access interfaces are underutilized

Explanation

Correct Answer

C:

Output queue counters show one queue saturating while another class experiences starvation. A switch QoS policy gives excessive strict priority to a busy traffic class and other service queues show sustained drops.

Incorrect Answers

A:

The proposed step “Queue statistics show ordinary workstation flows entering the high priority voice queue” would leave the problem unresolved: a switch QoS policy gives excessive strict priority to a busy traffic class and other service queues show sustained drops. Output queue counters show one queue saturating while another class experiences starvation.

B:

Module port reports unsupported breakout mode and none of its child links come up. A switch QoS policy gives excessive strict priority to a busy traffic class and other service queues show sustained drops. Output queue counters show one queue saturating while another class experiences starvation.

D:

“Interface telemetry shows drops only at WAN egress while access interfaces are underutilized” does not demonstrate what is needed when a switch QoS policy gives excessive strict priority to a busy traffic class and other service queues show sustained drops. Output queue counters show one queue saturating while another class experiences starvation.

Question 722

In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an Aruba Central deployment imports a switch record with an incorrect hardware identifier and expects it to join the right site. The project must protect approved network access while addressing the specific cause. Which response directly addresses the reported switching issue without bypassing policy?

  1. align permitted VLAN and native untagged tagging design at both peers
  2. verify device identity and entitlement using supported Central onboarding procedures
  3. identify configuration ownership and update the approved Central source before reconciling the device
  4. move or assign the device to a reviewed Central group and confirm intended configuration scope

Explanation

Correct Answer

B:

Verify device identity and entitlement using supported Central onboarding procedures. Central inventory shows an expected switch offline while the physical serial differs from the imported record, making verify device identity and entitlement using supported Central onboarding procedures more relevant than changes aimed at neighboring features. In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an Aruba Central deployment imports a switch record with an incorrect hardware identifier and expects it to join the right site.

Incorrect Answers

A:

Aligning permitted VLAN and native untagged tagging design at both peers is not a direct response to the evidence: central inventory shows an expected switch offline while the physical serial differs from the imported record, making verify device identity and entitlement using supported Central onboarding procedures more relevant than changes aimed at neighboring features. Verify device identity and entitlement using supported Central onboarding procedures.

C:

Identify configuration ownership and update the approved Central source before reconciling the device. Central inventory shows an expected switch offline while the physical serial differs from the imported record, making verify device identity and entitlement using supported Central onboarding procedures more relevant than changes aimed at neighboring features. Verify device identity and entitlement using supported Central onboarding procedures. In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an Aruba Central deployment imports a switch record with an incorrect hardware identifier and expects it to.

D:

Move or assign the device to a reviewed Central group and confirm intended configuration scope. Central inventory shows an expected switch offline while the physical serial differs from the imported record, making verify device identity and entitlement using supported Central onboarding procedures more relevant than changes aimed at neighboring features. Verify device identity and entitlement using supported Central onboarding procedures. In a multi-site Aruba switching engineering team, engineers discover during a device commissioning session that an Aruba Central deployment imports a switch record with an incorrect hardware identifier and expects it to.

Question 723

In a campus network incident response team, engineers discover during a critical wired outage investigation that a branch access link shows abnormal late collisions or errors after one peer is manually pinned to conflicting negotiation settings. The project must protect approved network access while addressing the specific cause. The diagnostic trace is one peer indicates negotiated full duplex while the other side shows mismatched fixed settings and errors. Which intervention paired with its proof closes this exact failure?

  1. synchronize supported OSPF authentication parameters while retaining approved key control — verify: neighbor returns to full state and expected routes remain while unauthorized sessions fail
  2. inspect optic receive levels connector cleanliness and physical media quality before changing QoS — verify: error rates and application transfer time normalize at agreed interface parameters
  3. align link speed and duplex negotiation using supported peer capabilities — verify: error rates and application transfer time normalize at agreed interface parameters
  4. align link speed and duplex negotiation using supported peer capabilities — verify: control plane utilization returns to baseline with stable neighbor and interface state

Explanation

Correct Answer

C:

Align link speed and duplex negotiation using supported peer capabilities. Verify that error rates and application transfer time normalize at agreed interface parameters. Layer 1 and 2 operating mismatches can present as application performance faults. One peer indicates negotiated full duplex while the other side shows mismatched fixed settings and errors, and the pair must correct that exact failure.

Incorrect Answers

A:

Neighbor returns to full state and expected routes remain while unauthorized sessions fail. The required validation is different: error rates and application transfer time normalize at agreed interface parameters. Align link speed and duplex negotiation using supported peer capabilities.

B:

Error rates and application transfer time normalize at agreed interface parameters. To correct the reported problem, align link speed and duplex negotiation using supported peer capabilities. Layer 1 and 2 operating mismatches can present as application performance faults.

D:

Control plane utilization returns to baseline with stable neighbor and interface state. It would not verify that error rates and application transfer time normalize at agreed interface parameters. One peer indicates negotiated full duplex while the other side shows mismatched fixed settings and errors, and the pair must correct that exact failure.

Question 724

In a regional enterprise network architecture board, engineers discover during a multi-building migration plan that a design specifies employee guest and industrial traffic but provides no explicit permitted communication matrix. The project must protect approved network access while addressing the specific cause. Which acceptance observation is necessary to close this specific network issue?

  1. pilot and later site changes pass reachability tests with documented rollback completed in rehearsal
  2. traffic tests demonstrate documented permitted paths and deny prohibited paths
  3. the validated stack supported by the chosen model forms the required control and data plane topology
  4. an operator can recover configuration after intentionally disrupting production management routing

Explanation

Correct Answer

B:

Traffic tests demonstrate documented permitted paths and deny prohibited paths. The request lists three populations yet contains no authorized inter group flow list, which must differ from the measured post-change state.

Incorrect Answers

A:

Pilot and later site changes pass reachability tests with documented rollback completed in rehearsal. The request lists three populations yet contains no authorized inter group flow list, which must differ from the measured post-change state. Traffic tests demonstrate documented permitted paths and deny prohibited paths.

C:

“The validated stack supported by the chosen model forms the required control and data plane topology” does not demonstrate what is needed when the request lists three populations yet contains no authorized inter group flow list, which must differ from the measured post-change state. Traffic tests demonstrate documented permitted paths and deny prohibited paths.

D:

“An operator can recover configuration after intentionally disrupting production management routing” does not explain the observed failure: the request lists three populations yet contains no authorized inter group flow list, which must differ from the measured post-change state. Traffic tests demonstrate documented permitted paths and deny prohibited paths.

Question 725

During a distribution switch deployment for a corporate voice and data network team, a fault trace confirms that a technician changes an Aruba CX interface locally while its Central managed template continues to enforce an older value. The team needs a supported change with independently measurable acceptance evidence. What finding should an engineer use to distinguish the root cause?

  1. device configuration shows unauthorized trunk VLANs immediately after group enrollment
  2. local edit disappears after the next Central synchronization event
  3. Central inventory shows an expected switch offline while the physical serial differs from the imported record
  4. pre reboot connectivity works while the recorded startup configuration lacks the updated VLAN

Explanation

Correct Answer

B:

Local edit disappears after the next Central synchronization event. During a distribution switch deployment for a corporate voice and data network team, a fault trace confirms that a technician changes an Aruba CX interface locally while its Central managed template continues to enforce an older value.

Incorrect Answers

A:

During a distribution switch deployment for a corporate voice and data network team, a fault trace confirms that a technician changes an Aruba CX interface locally while its Central managed template continues to enforce an older value. The proposed action “Device configuration shows unauthorized trunk VLANs immediately after group enrollment” would not resolve that situation. Local edit disappears after the next Central synchronization event.

C:

Central inventory shows an expected switch offline while the physical serial differs from the imported record. During a distribution switch deployment for a corporate voice and data network team, a fault trace confirms that a technician changes an Aruba CX interface locally while its Central managed template continues to enforce an older value. Local edit disappears after the next Central synchronization event.

D:

Pre reboot connectivity works while the recorded startup configuration lacks the updated VLAN. During a distribution switch deployment for a corporate voice and data network team, a fault trace confirms that a technician changes an Aruba CX interface locally while its Central managed template continues to enforce an older value. Local edit disappears after the next Central synchronization event.

Question 726

In a regional network operations center, engineers discover during a packet loss fault isolation that a switch interface remains disconnected although the cable tests good because the configuration had placed it in shutdown state. The project must protect approved network access while addressing the specific cause. The diagnostic trace is interface shows administratively down rather than physical link failure. Which combined corrective action and matching validation best meets the objective?

  1. restore the port administrative state only after checking approved interface policy — verify: interface shows operational up and permitted traffic passes without relaxing security
  2. restore the port administrative state only after checking approved interface policy — verify: application payloads of intended size traverse the path with approved MTU and no black hole
  3. align link speed and duplex negotiation using supported peer capabilities — verify: error rates and application transfer time normalize at agreed interface parameters
  4. inspect optical receive power connectors and fiber path for attenuation and repair the physical cause — verify: interface shows operational up and permitted traffic passes without relaxing security

Explanation

Correct Answer

A:

Restore the port administrative state only after checking approved interface policy. Verify that interface shows operational up and permitted traffic passes without relaxing security. The configuration had placed it in shutdown state. Interface shows administratively down rather than physical link failure, and the pair must correct that exact failure. In a regional network operations center, engineers discover during a packet loss fault isolation that a switch interface remains disconnected although the cable tests good because the configuration had placed it in.

Incorrect Answers

B:

Application payloads of intended size traverse the path with approved MTU and no black hole. It would not verify that interface shows operational up and permitted traffic passes without relaxing security. Interface shows administratively down rather than physical link failure, and the pair must correct that exact failure.

C:

Error rates and application transfer time normalize at agreed interface parameters. The required validation is different: interface shows operational up and permitted traffic passes without relaxing security. Restore the port administrative state only after checking approved interface policy.

D:

Interface shows operational up and permitted traffic passes without relaxing security. To correct the reported problem, restore the port administrative state only after checking approved interface policy. The configuration had placed it in shutdown state. In a regional network operations center, engineers discover during a packet loss fault isolation that a switch interface remains disconnected although the cable tests good because the configuration had placed it in shutdown state.

Question 727

In a regional hospital network change group, engineers discover during a high-availability implementation meeting that an operations team plans remote switch upgrades over the only production management path with no alternative console access. The project must protect approved network access while addressing the specific cause. The diagnostic trace is management interface relies on the same VLAN and route being replaced during the change. Which change-and-test combination would you approve for the affected network?

  1. map interface media and line rate requirements to supported transceiver and switch port capabilities — verify: end to end link negotiates at the approved speed and meets packet loss thresholds
  2. audit optical modules fiber type and reach for each proposed uplink prior to installation — verify: an operator can recover configuration after intentionally disrupting production management routing
  3. include independent management recovery access and documented backout procedures — verify: an operator can recover configuration after intentionally disrupting production management routing
  4. include independent management recovery access and documented backout procedures — verify: measured application load stays within documented utilization and latency targets during peak periods

Explanation

Correct Answer

C:

Include independent management recovery access and documented backout procedures. Verify that an operator can recover configuration after intentionally disrupting production management routing. Management reachability should not depend exclusively on the link being modified. Management interface relies on the same VLAN and route being replaced during the change, and the pair must correct that exact failure.

Incorrect Answers

A:

End to end link negotiates at the approved speed and meets packet loss thresholds. The required validation is different: an operator can recover configuration after intentionally disrupting production management routing. Include independent management recovery access and documented backout procedures.

B:

An operator can recover configuration after intentionally disrupting production management routing. To correct the reported problem, include independent management recovery access and documented backout procedures. Management reachability should not depend exclusively on the link being modified.

D:

Measured application load stays within documented utilization and latency targets during peak periods. It would not verify that an operator can recover configuration after intentionally disrupting production management routing. Management interface relies on the same VLAN and route being replaced during the change, and the pair must correct that exact failure.

Question 728

During a wired network topology design review for a university campus infrastructure team, a fault trace confirms that a campus team assumes every entry access switch supports the same VSF stacking arrangement as its aggregation platform. The team needs a supported change with independently measurable acceptance evidence. Which targeted configuration or design decision should the engineer take first?

  1. confirm exact HPE Aruba CX model stack support and topology before selecting the implementation
  2. calculate traffic demand and plan redundant high speed uplinks before deploying the closet switches
  3. match compact campus access switch capacity and uplink ports to actual branch demand
  4. select the simplest supported HPE Aruba networking access architecture satisfying connectivity and resilience

Explanation

Correct Answer

A:

Confirm exact HPE Aruba CX model stack support and topology before selecting the implementation. Selected switch datasheet lacks the expected VSF functionality while the proposal requires one logical stack, making confirm exact HPE Aruba CX model stack support and topology before selecting the implementation more relevant than changes aimed at neighboring features. During a wired network topology design review for a university campus infrastructure team, a fault trace confirms that a campus team assumes every entry access switch supports the same VSF stacking arrangement as its aggregation platform.

Incorrect Answers

B:

Calculate traffic demand and plan redundant high speed uplinks before deploying the closet switches. Selected switch datasheet lacks the expected VSF functionality while the proposal requires one logical stack, making confirm exact HPE Aruba CX model stack support and topology before selecting the implementation more relevant than changes aimed at neighboring features. Confirm exact HPE Aruba CX model stack support and topology before selecting the implementation.

C:

Match compact campus access switch capacity and uplink ports to actual branch demand. Selected switch datasheet lacks the expected VSF functionality while the proposal requires one logical stack, making confirm exact HPE Aruba CX model stack support and topology before selecting the implementation more relevant than changes aimed at neighboring features. Confirm exact HPE Aruba CX model stack support and topology before selecting the implementation.

D:

Selecting the simplest supported HPE Aruba networking access architecture satisfying connectivity and resilience addresses a separate aspect of the case. Selected switch datasheet lacks the expected VSF functionality while the proposal requires one logical stack, making confirm exact HPE Aruba CX model stack support and topology before selecting the implementation more relevant than changes aimed at neighboring features. Confirm exact HPE Aruba CX model stack support and topology before selecting the implementation.

Question 729

During a packet loss fault isolation for a regional network operations center, a fault trace confirms that a switch experiences management lag and elevated CPU because repeated link transitions trigger frequent routing and MAC updates. The team needs a supported change with independently measurable acceptance evidence. Which underlying forwarding or operations principle explains the proposed change?

  1. churn in topology events can consume control plane resources even at low data traffic
  2. ACL ordering and match specificity determine which traffic is actually permitted
  3. latency sensitive flows need end to end consistent QoS treatment
  4. flow based aggregation hashing can create member imbalances with large individual flows

Explanation

Correct Answer

A:

Churn in topology events can consume control plane resources even at low data traffic. Repeated link transitions trigger frequent routing and MAC updates, as supported by the specific evidence system CPU and log rate rise in parallel with repeated interface up down messages, rather than a generic switching design claim. During a packet loss fault isolation for a regional network operations center, a fault trace confirms that a switch experiences management lag and elevated CPU because repeated link transitions trigger frequent routing and MAC updates.

Incorrect Answers

B:

Repeated link transitions trigger frequent routing and MAC updates, as supported by the specific evidence system CPU and log rate rise in parallel with repeated interface up down messages, rather than a generic switching design claim. During a packet loss fault isolation for a regional network operations center, a fault trace confirms that a switch experiences management lag and elevated CPU because repeated link transitions trigger frequent routing and MAC updates. The proposed action “ACL ordering and match specificity determine which traffic is actually permitted” would not resolve that situation. Churn in topology events can consume control plane resources even at low data traffic.

C:

The proposed step “Latency sensitive flows need end to end consistent QoS treatment” would leave the problem unresolved: during a packet loss fault isolation for a regional network operations center, a fault trace confirms that a switch experiences management lag and elevated CPU because repeated link transitions trigger frequent routing and MAC updates. Churn in topology events can consume control plane resources even at low data traffic.

D:

“Flow based aggregation hashing can create member imbalances with large individual flows” does not explain the observed failure: during a packet loss fault isolation for a regional network operations center, a fault trace confirms that a switch experiences management lag and elevated CPU because repeated link transitions trigger frequent routing and MAC updates. Repeated link transitions trigger frequent routing and MAC updates, as supported by the specific evidence system CPU and log rate rise in parallel with repeated interface up down messages, rather than a generic switching design claim. Churn in topology events can consume control plane resources even at low data traffic.

Question 730

In a managed LAN engineering contractor, engineers discover during a wired network handoff audit that a user VLAN moved to a routed gateway no longer reaches the remote DHCP server because relay has not been configured. The project must protect approved network access while addressing the specific cause. Before changing equipment, which operational observation best confirms the diagnosis?

  1. underlay route tests show VTEP loopback addresses unreachable across the aggregation path
  2. Central inventory shows an expected switch offline while the physical serial differs from the imported record
  3. clients broadcast DHCP discovery locally but server receives no relayed request
  4. route lookup shows no valid resolution toward the declared next hop

Explanation

Correct Answer

C:

Clients broadcast DHCP discovery locally but server receives no relayed request. DHCP broadcast traffic does not cross a routed boundary without relay support. A user VLAN moved to a routed gateway no longer reaches the remote DHCP server because relay has not been configured.

Incorrect Answers

A:

“Underlay route tests show VTEP loopback addresses unreachable across the aggregation path” does not demonstrate what is needed when a user VLAN moved to a routed gateway no longer reaches the remote DHCP server because relay has not been configured. Clients broadcast DHCP discovery locally but server receives no relayed request.

B:

“Central inventory shows an expected switch offline while the physical serial differs from the imported record” does not explain the observed failure: a user VLAN moved to a routed gateway no longer reaches the remote DHCP server because relay has not been configured. Clients broadcast DHCP discovery locally but server receives no relayed request.

D:

DHCP broadcast traffic does not cross a routed boundary without relay support. A user VLAN moved to a routed gateway no longer reaches the remote DHCP server because relay has not been configured. Routing lookup shows no valid resolution toward the declared next hop alone cannot establish that the failure is corrected. Clients broadcast DHCP discovery locally but server receives no relayed request.

HPE Network Switching Professional (HPE7-A08) Practice Tests