Pass HP HPE6-A86 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
HP HPE6-A86 Practice Test 49
Question 480
At Woodcrest Data Services, the team supports brownfield wired network migration and acceptance and must prove each port, gateway and management service before production cutover. Observed incident: An AOS-CX SVI is configured with the correct gateway address, yet clients cannot use it to reach other subnets. Confirmed evidence: The VLAN interface is down and the intended VLAN has no active forwarding member ports on the switch. Which paired change and measurable verification is most defensible for this case?
Explanation
Correct Answer
The selection links action to a separately checked outcome: Action: Restore valid active VLAN membership and verify the configured SVI within the approved routing design. Proof: The VLAN interface becomes operational and a client can reach its gateway and approved routed destination. It is grounded in the Woodcrest Data Services clue: The VLAN interface is down and the intended VLAN has no active forwarding member ports on the switch. Closure must show: The VLAN interface becomes operational and a client can reach its gateway and approved routed destination.
Incorrect Answers
Action: Reconcile configuration against the approved VLAN plan and remove unauthorized membership without changing required access. Proof: A show-command audit confirms exact VLAN membership and negative isolation tests block unauthorized cross-segment delivery. The recorded evidence at Woodcrest Data Services is: The VLAN interface is down and the intended VLAN has no active forwarding member ports on the switch. The correct outcome to measure is: The VLAN interface becomes operational and a client can reach its gateway and approved routed destination.
Action: Apply a mutually consistent authorized point-to-point addressing plan to both interfaces. Proof: Neighbors resolve and exchange permitted routed traffic without broadening the link's address space. The case at Woodcrest Data Services is supported by: The VLAN interface is down and the intended VLAN has no active forwarding member ports on the switch. Closure is linked to: The VLAN interface becomes operational and a client can reach its gateway and approved routed destination.
Action: Apply supported role-based authorization to the authenticated administrative group and retain a controlled break-glass path. Proof: Read-only show operations succeed while configuration attempts from the technician role are denied and audited. They do not directly establish recovery of the reported Woodcrest Data Services problem: An AOS-CX SVI is configured with the correct gateway address, yet clients cannot use it to reach other subnets. Verification requires: The VLAN interface becomes operational and a client can reach its gateway and approved routed destination.
Question 481
At Highland Regional Offices, the team supports deployment and configuration of small-campus AOS-CX switches and must protect existing VLAN boundaries and use verified approved changes. Observed incident: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Confirmed evidence: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Which authorized correction most directly addresses this particular switching or network engineering problem?
Explanation
Correct Answer
For Highland Regional Offices, the recorded clue is: Routing output retains an old next hop that is no longer reachable, while connected network routes work. The bounded correction is: Replace the stale default route with the approved reachable upstream next hop after checking return-path requirements. A default route is only useful when its next hop is reachable and the downstream path supports the traffic. Confirm recovery using this outcome: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Incorrect Answers
Remove or correct the erroneous specific route using the approved change and path-control policy. The reported failure at Highland Regional Offices is: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Its independent recovery check must establish: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Another approach would be: Align approved MST region parameters and instance VLAN mappings before validating convergence. At Highland Regional Offices, the diagnosed condition is different: Routing output retains an old next hop that is no longer reachable, while connected network routes work. The relevant principle is: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
Although that step is: Assign the intended interface to the supported logical LAG and verify peer negotiation and interface settings, the decisive observation here is: Routing output retains an old next hop that is no longer reachable, while connected network routes work. That choice alone does not establish the needed correction at Highland Regional Offices.
Question 482
At Highland Regional Offices, the team supports deployment and configuration of small-campus AOS-CX switches and must protect existing VLAN boundaries and use verified approved changes. Observed incident: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Before taking corrective action, the technician must distinguish the actual issue from a nearby but different networking fault. Which observed diagnostic evidence most strongly identifies this specific failure rather than a plausible different issue?
Explanation
Correct Answer
Routing output retains an old next hop that is no longer reachable, while connected network routes work. At Highland Regional Offices, the stated incident is: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. The signal is meaningful because: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
Incorrect Answers
Bridge priority and topology output identify the temporary access chassis as the root despite an approved distribution pair. The reported Highland Regional Offices fault is: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. The signal that actually distinguishes it is: Routing output retains an old next hop that is no longer reachable, while connected network routes work.
ARP entries repeatedly alternate between two hardware addresses for the assigned IP and logs show duplicate-address detection. At Highland Regional Offices, the recorded condition is: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. The particular evidence supporting it is: Routing output retains an old next hop that is no longer reachable, while connected network routes work.
Another possibility is: Detailed interface statistics show a rapidly rising CRC error count that status-only output omits. The current case at Highland Regional Offices contains a different identifying observation: Routing output retains an old next hop that is no longer reachable, while connected network routes work. The relevant mechanism is: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
Question 483
At Highland Regional Offices, the team supports deployment and configuration of small-campus AOS-CX switches and must protect existing VLAN boundaries and use verified approved changes. Observed incident: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Investigation found: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Approved correction: Replace the stale default route with the approved reachable upstream next hop after checking return-path requirements. Which independent observable result best establishes that this particular issue has been resolved?
Explanation
Correct Answer
The listed result is the right measure for Highland Regional Offices: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected. It verifies the intended effect, whereas the case originally showed: Routing output retains an old next hop that is no longer reachable, while connected network routes work. The relevant principle is: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
Incorrect Answers
Root identification and blocked paths match the approved redundant topology under normal and link-failure tests. The recorded clue at Highland Regional Offices is: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Closure has to validate the corresponding result: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Both switches report the intended common MST region and required VLAN paths reconverge without loops. That alone would not confirm correction of the Highland Regional Offices problem: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. The necessary proof is: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
The aggregate lists both correct forwarding members and service continues during a controlled single-link removal. It would leave the Highland Regional Offices fault unverified. The stated acceptance test is: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Question 484
At Highland Regional Offices, the team supports deployment and configuration of small-campus AOS-CX switches and must protect existing VLAN boundaries and use verified approved changes. Observed incident: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Confirmed evidence: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Which networking or switch-management principle best explains the reported behavior?
Explanation
Correct Answer
The governing principle is: A default route is only useful when its next hop is reachable and the downstream path supports the traffic. The Highland Regional Offices record contains the corresponding signal: Routing output retains an old next hop that is no longer reachable, while connected network routes work. This accounts for the stated issue.
Incorrect Answers
LLDP provides adjacent device identity through explicit discovery exchange and is not inferred from IP connectivity. At Highland Regional Offices, the reported issue is: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. The stated observations instead follow from: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
Another rule is: Runtime state and persistent startup state can differ; operational validation should include reboot survivability. It does not explain the documented Highland Regional Offices clue: Routing output retains an old next hop that is no longer reachable, while connected network routes work. The relevant mechanism is: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
Another relationship would be: Multiple Spanning Tree interoperability depends on identical region configuration and consistent instance mappings. It does not account for the issue reported by Highland Regional Offices: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. The applicable principle is: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
Question 485
At Highland Regional Offices, the team supports deployment and configuration of small-campus AOS-CX switches and must protect existing VLAN boundaries and use verified approved changes. Observed incident: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Confirmed evidence: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Which paired change and measurable verification is most defensible for this case?
Explanation
Correct Answer
Action: Replace the stale default route with the approved reachable upstream next hop after checking return-path requirements. Proof: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected. The relevant finding at Highland Regional Offices is: Routing output retains an old next hop that is no longer reachable, while connected network routes work.
Incorrect Answers
An alternative option suggests: Action: Configure reachable approved NTP servers and the correct timezone for log presentation, following the platform guide. Proof: The switch synchronizes time and a test event aligns with the central log timeline within the operational tolerance. The documented Highland Regional Offices problem calls for a check against: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected. The original clue is: Routing output retains an old next hop that is no longer reachable, while connected network routes work.
Action: Assign the intended interface to the supported logical LAG and verify peer negotiation and interface settings. Proof: The aggregate lists both correct forwarding members and service continues during a controlled single-link removal. The Highland Regional Offices fault is: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Its acceptance criterion is: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Action: Validate both routing table and neighbor/physical link state before accepting the installation. Proof: The next hop resolves, route forwarding counters increment and end-to-end test traffic reaches the approved prefix. The actual issue at Highland Regional Offices is: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. The proposed verification does not establish that the required result is: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Question 486
At Northstar Manufacturing Group, the team supports brownfield wired network migration and acceptance and must prove each port, gateway and management service before production cutover. Observed incident: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Confirmed evidence: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Which authorized correction most directly addresses this particular switching or network engineering problem?
Explanation
Correct Answer
Routing output retains an old next hop that is no longer reachable, while connected network routes work. At Northstar Manufacturing Group, the relevant intervention is: Replace the stale default route with the approved reachable upstream next hop after checking return-path requirements. A default route is only useful when its next hop is reachable and the downstream path supports the traffic. Confirm effectiveness with: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Incorrect Answers
The suggested alternative is: Validate both routing table and neighbor/physical link state before accepting the installation. The case identifies the cause at Northstar Manufacturing Group using: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Implementing that step alone would not verify: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Another proposed action is: Save the approved tested configuration to the supported persistent configuration store and validate the save result. In Northstar Manufacturing Group, the relevant evidence is: Routing output retains an old next hop that is no longer reachable, while connected network routes work. The focused correction should address the root condition shown by that clue.
Another proposed response centers on: Correct the approved syslog source, destination and management routing path while retaining logging access restrictions. The reported Northstar Manufacturing Group failure is: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. The decisive record shows: Routing output retains an old next hop that is no longer reachable, while connected network routes work.
Question 487
At Northstar Manufacturing Group, the team supports brownfield wired network migration and acceptance and must prove each port, gateway and management service before production cutover. Observed incident: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Before taking corrective action, the technician must distinguish the actual issue from a nearby but different networking fault. Which observed diagnostic evidence most strongly identifies this specific failure rather than a plausible different issue?
Explanation
Correct Answer
The question asks for the distinguishing observation, which is: Routing output retains an old next hop that is no longer reachable, while connected network routes work. It addresses the reported Northstar Manufacturing Group failure: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. The causal relationship is: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
Incorrect Answers
MST region settings show a difference in name, revision or VLAN-to-instance mapping between the switches. It does not substantiate the particular Northstar Manufacturing Group condition: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. The documented finding is: Routing output retains an old next hop that is no longer reachable, while connected network routes work.
For Northstar Manufacturing Group, the option presents: The VLAN interface is down and the intended VLAN has no active forwarding member ports on the switch. It would not by itself establish the documented cause, which is supported by: Routing output retains an old next hop that is no longer reachable, while connected network routes work.
Device clock and timezone configuration disagree with authorized NTP sources and the switch shows synchronization unavailable. It is not the discriminating clue in this record; that clue is: Routing output retains an old next hop that is no longer reachable, while connected network routes work. The Northstar Manufacturing Group issue is: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration.
Question 488
At Northstar Manufacturing Group, the team supports brownfield wired network migration and acceptance and must prove each port, gateway and management service before production cutover. Observed incident: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Investigation found: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Approved correction: Replace the stale default route with the approved reachable upstream next hop after checking return-path requirements. Which independent observable result best establishes that this particular issue has been resolved?
Explanation
Correct Answer
Independent closure should establish: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected. This directly corresponds to the Northstar Manufacturing Group finding: Routing output retains an old next hop that is no longer reachable, while connected network routes work. It supports recovery of the stated problem: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration.
Incorrect Answers
An alternative test would show: A replacement media test shows stable link and error counters stop increasing under controlled load. It does not show the required post-change result at Northstar Manufacturing Group: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected. The original finding was: Routing output retains an old next hop that is no longer reachable, while connected network routes work.
Another test would examine: Read-only show operations succeed while configuration attempts from the technician role are denied and audited. Yet the failure at Northstar Manufacturing Group is: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. An independent test should establish: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Traceroute and traffic tests show only the finance prefix using the intended path while backup failover remains viable. The acceptance condition for the stated Northstar Manufacturing Group fault is: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected. The tests do not measure the same outcome.
Question 489
At Northstar Manufacturing Group, the team supports brownfield wired network migration and acceptance and must prove each port, gateway and management service before production cutover. Observed incident: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Confirmed evidence: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Which networking or switch-management principle best explains the reported behavior?
Explanation
Correct Answer
The technical relationship governing Northstar Manufacturing Group is: A default route is only useful when its next hop is reachable and the downstream path supports the traffic. The record shows: Routing output retains an old next hop that is no longer reachable, while connected network routes work. That observation is a direct consequence of the stated failure.
Incorrect Answers
Switch management authentication must be paired with authorization appropriate to each operator's role. In Northstar Manufacturing Group, the actual observation is: Routing output retains an old next hop that is no longer reachable, while connected network routes work. The rule connected to that evidence is: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
A trunk forwards a tagged VLAN only when membership and tagging are supported along the whole Layer 2 path. The case at Northstar Manufacturing Group documents: Routing output retains an old next hop that is no longer reachable, while connected network routes work. That finding is accounted for by: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
Another principle is: Configuration validation must compare live device state with documented requirements instead of checking only reachable hosts. It is not enough to account for the recorded Northstar Manufacturing Group evidence: Routing output retains an old next hop that is no longer reachable, while connected network routes work. The applicable rule is: A default route is only useful when its next hop is reachable and the downstream path supports the traffic.
Question 490
At Northstar Manufacturing Group, the team supports brownfield wired network migration and acceptance and must prove each port, gateway and management service before production cutover. Observed incident: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Confirmed evidence: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Which paired change and measurable verification is most defensible for this case?
Explanation
Correct Answer
The selection links action to a separately checked outcome: Action: Replace the stale default route with the approved reachable upstream next hop after checking return-path requirements. Proof: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected. It is grounded in the Northstar Manufacturing Group clue: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Closure must show: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Incorrect Answers
Action: Apply supported role-based authorization to the authenticated administrative group and retain a controlled break-glass path. Proof: Read-only show operations succeed while configuration attempts from the technician role are denied and audited. The recorded evidence at Northstar Manufacturing Group is: Routing output retains an old next hop that is no longer reachable, while connected network routes work. The correct outcome to measure is: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Action: Enable LLDP on the approved links and reconcile topology with physical port and equipment inventory. Proof: Neighbor identities and interface mappings appear accurately without exposing discovery on prohibited interfaces. The case at Northstar Manufacturing Group is supported by: Routing output retains an old next hop that is no longer reachable, while connected network routes work. Closure is linked to: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
Action: Allocate a unique approved management IP and reconcile IPAM records and downstream access policy. Proof: ARP resolves consistently to one intended switch and management connections remain stable under repeated checks. They do not directly establish recovery of the reported Northstar Manufacturing Group problem: A small enterprise switch routes between local VLANs but cannot forward traffic to external networks after an uplink migration. Verification requires: Controlled external tests follow the intended uplink and local inter-VLAN routing remains unaffected.
HPE Network Switching Associate (HPE6-A86) Practice Tests
- HP HPE6-A86 Practice Test 47 - 10 Questions (Last Reviewed 06-Oct-2026)
- HP HPE6-A86 Practice Test 48 - 10 Questions (Last Reviewed 05-Oct-2026)
- HP HPE6-A86 Practice Test 49 - 10 Questions (Last Reviewed 04-Oct-2026)
- HP HPE6-A86 Practice Test 50 - 10 Questions (Last Reviewed 03-Oct-2026)
- HP HPE6-A86 Practice Test 51 - 10 Questions (Last Reviewed 02-Oct-2026)
