Google Professional Cloud Network Engineer Practice Test 58 - Prepaway
Practice Exams:

Pass Google Professional Cloud Network Engineer Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

Professional Cloud Network Engineer Premium Bundle


  • Premium File 316 Questions & Answers. Last update: Nov 13, 2026
  • Training Course 57 Lectures
  • Study Guide 500 Pages

Google Professional Cloud Network Engineer Practice Test 58

Question 570

In fictional Asterline Telecom, operators encountered: Two branches are added as hybrid spokes to an NCC hub yet their operators assume cross-site traffic is automatically exchanged. Evidence: Hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology. They propose: Configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy. Which independent result best confirms the change works?

  1. For fictional Asterline Telecom, multicloud backbone operations team: The intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.
  2. For fictional Asterline Telecom, multicloud backbone operations team: A test from the required source reaches the exact authorized destination and unrelated spokes remain isolated.
  3. For fictional Asterline Telecom, multicloud backbone operations team: An allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted.
  4. For fictional Asterline Telecom, multicloud backbone operations team: A controlled loss of the primary interconnect leaves required application traffic using an approved recovery path.

Explanation

Correct Answer

C:

To close the incident, demonstrate that an allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted. That addresses hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology and reflects the rule that NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls.

Incorrect Answers

A:

A test that the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance would not demonstrate closure of this condition. The needed proof is an allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted.

B:

A test from the required source reaches the exact authorized destination and unrelated spokes remain isolated. That does not demonstrate the case-specific success condition: an allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted. NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls.

D:

A controlled loss of the primary interconnect leaves required application traffic using an approved recovery path. That result does not test the original problem, identified by hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology. Recovery must show that an allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted.

Question 571

At fictional Asterline Telecom, the multicloud backbone operations team reviews: Two branches are added as hybrid spokes to an NCC hub yet their operators assume cross-site traffic is automatically exchanged. Evidence: Hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology. Which Google Cloud networking design principle best explains the required correction?

  1. For fictional Asterline Telecom, multicloud backbone operations team: NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls.
  2. For fictional Asterline Telecom, multicloud backbone operations team: Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.
  3. For fictional Asterline Telecom, multicloud backbone operations team: NCC connectivity and peering each have defined route propagation limits that cannot be treated as universal transit.
  4. For fictional Asterline Telecom, multicloud backbone operations team: BGP custom advertisement policy is an access and routing design responsibility, not merely a convenience setting.

Explanation

Correct Answer

A:

NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls. That explains the observed condition: hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology. The scoped response is to configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy.

Incorrect Answers

B:

A proposed explanation is router appliances participate in NCC routing only under the documented spoke and control-plane attachment model. The present evidence is hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology, which instead follows from NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls.

C:

NCC connectivity and peering each have defined route propagation limits that cannot be treated as universal transit. This describes another relationship, not the cause of two branches are added as hybrid spokes to an NCC hub yet their operators assume cross-site traffic is automatically exchanged. NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls.

D:

The rule BGP custom advertisement policy is an access and routing design responsibility, not merely a convenience setting does not account for hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology. This case is governed by NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls.

Question 572

At fictional Asterline Telecom, the observed incident is: Two branches are added as hybrid spokes to an NCC hub yet their operators assume cross-site traffic is automatically exchanged. The diagnostic finding is: Hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology. Which action AND separate measurable verification best address this case?

  1. For fictional Asterline Telecom, multicloud backbone operations team: Action: Configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy. Independent proof: An allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted.
  2. For fictional Asterline Telecom, multicloud backbone operations team: Action: Validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths. Independent proof: The intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.
  3. For fictional Asterline Telecom, multicloud backbone operations team: Action: Document supported NCC spoke types and network-to-network route propagation, then add a valid approved connectivity design. Independent proof: A test from the required source reaches the exact authorized destination and unrelated spokes remain isolated.
  4. For fictional Asterline Telecom, multicloud backbone operations team: Action: Configure the authorized VLAN attachment and associated Cloud Router peer with approved BGP identity and route policies. Independent proof: A test on-premises prefix is learned and a protected VM communicates over the intended interconnect attachment.

Explanation

Correct Answer

A:

The proposed change is to configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy. The separate proof is an allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted. NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls.

Incorrect Answers

B:

Action: Validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths. Independent proof: The intended prefix appears in approved route inventories and test traffic traverses the authorized appliance. It misses the relevant dependency because NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls. Instead verify that an allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted.

C:

The proposed pair addresses Action: Document supported NCC spoke types and network-to-network route propagation, then add a valid approved connectivity design. Independent proof: A test from the required source reaches the exact authorized destination and unrelated spokes remain isolated. Here hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology. The bounded response is configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy with proof that an allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted.

D:

The alternative action and test—Action: Configure the authorized VLAN attachment and associated Cloud Router peer with approved BGP identity and route policies. Independent proof: A test on-premises prefix is learned and a protected VM communicates over the intended interconnect attachment—would measure a different issue. This case requires configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy and confirmation that an allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted.

Question 573

At fictional Oakwell Public Works, the hybrid connectivity engineering team maintains on-premises and cloud transport links. A Google Cloud network issue is reported: A third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. The decisive observation is: Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Which scoped engineering response is most appropriate?

  1. For fictional Oakwell Public Works, hybrid connectivity engineering team: Document supported NCC spoke types and network-to-network route propagation, then add a valid approved connectivity design.
  2. For fictional Oakwell Public Works, hybrid connectivity engineering team: Configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy.
  3. For fictional Oakwell Public Works, hybrid connectivity engineering team: Validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths.
  4. For fictional Oakwell Public Works, hybrid connectivity engineering team: Reconcile advertised BGP route priorities and supported best-path selection behavior at the applicable Cloud Router and VPC scope.

Explanation

Correct Answer

C:

Validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths. This addresses the evidence that route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Validate the outcome by checking that the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

Incorrect Answers

A:

Another possible response is to document supported NCC spoke types and network-to-network route propagation, then add a valid approved connectivity design. The case evidence instead shows that route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.

B:

Configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy. This does not address the reported incident: a third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. The case-specific correction is to validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths.

D:

One alternative would be to reconcile advertised BGP route priorities and supported best-path selection behavior at the applicable Cloud Router and VPC scope. The observed evidence instead shows that route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. The more relevant correction is to validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths.

Question 574

The hybrid connectivity engineering team at fictional Oakwell Public Works investigates: A third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. Which particular observation would most directly distinguish the network cause before changing production resources?

  1. For fictional Oakwell Public Works, hybrid connectivity engineering team: Hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology.
  2. For fictional Oakwell Public Works, hybrid connectivity engineering team: The effective route table has no advertised destination and the intended path depends on an unsupported combination of transitivity mechanisms.
  3. For fictional Oakwell Public Works, hybrid connectivity engineering team: IKE diagnostics reveal mismatched peer authentication or cryptographic proposal parameters while basic network transport is healthy.
  4. For fictional Oakwell Public Works, hybrid connectivity engineering team: Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table.

Explanation

Correct Answer

D:

Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. The fault is consistent with router appliances participate in NCC routing only under the documented spoke and control-plane attachment model. A change targeting the actual dependency is to validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths.

Incorrect Answers

A:

Hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology. It does not account for the observation route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table in the reported situation.

B:

One proposed finding is the effective route table has no advertised destination and the intended path depends on an unsupported combination of transitivity mechanisms. This would indicate another failure; here route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.

C:

The alternative observation, IKE diagnostics reveal mismatched peer authentication or cryptographic proposal parameters while basic network transport is healthy, concerns a different dependency. This incident is distinguished by route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.

Question 575

In fictional Oakwell Public Works, operators encountered: A third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. Evidence: Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. They propose: Validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths. Which independent result best confirms the change works?

  1. For fictional Oakwell Public Works, hybrid connectivity engineering team: A test from the required source reaches the exact authorized destination and unrelated spokes remain isolated.
  2. For fictional Oakwell Public Works, hybrid connectivity engineering team: An allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted.
  3. For fictional Oakwell Public Works, hybrid connectivity engineering team: The intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.
  4. For fictional Oakwell Public Works, hybrid connectivity engineering team: The partner learns only sanctioned destinations and a negative test confirms other internal prefixes remain unavailable.

Explanation

Correct Answer

C:

The acceptance evidence is the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance. This checks the intended outcome of validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths. Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.

Incorrect Answers

A:

Even verifying a test from the required source reaches the exact authorized destination and unrelated spokes remain isolated leaves the reported failure unproven. An acceptance test must show that the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

B:

The alternative outcome is an allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted. It may validate a separate setting, but not the required action: validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths. The required observation is the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

D:

The partner learns only sanctioned destinations and a negative test confirms other internal prefixes remain unavailable. The evidence relevant to this incident is route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Confirm the corresponding recovery result: The intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

Question 576

At fictional Oakwell Public Works, the hybrid connectivity engineering team reviews: A third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. Evidence: Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Which Google Cloud networking design principle best explains the required correction?

  1. For fictional Oakwell Public Works, hybrid connectivity engineering team: NCC connectivity and peering each have defined route propagation limits that cannot be treated as universal transit.
  2. For fictional Oakwell Public Works, hybrid connectivity engineering team: Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.
  3. For fictional Oakwell Public Works, hybrid connectivity engineering team: NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls.
  4. For fictional Oakwell Public Works, hybrid connectivity engineering team: VPN transport reachability and authenticated IPsec tunnel establishment are separate checks.

Explanation

Correct Answer

B:

Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model. This matters because a third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. The specific evidence is route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table.

Incorrect Answers

A:

NCC connectivity and peering each have defined route propagation limits that cannot be treated as universal transit. The decisive observation, route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table, requires a different explanation: Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.

C:

A different principle is: NCC hybrid spoke attachment and authorized inter-spoke traffic are distinct deployment controls. The causal link actually supported by route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table is router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.

D:

VPN transport reachability and authenticated IPsec tunnel establishment are separate checks. However, it does not explain route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. The applicable principle is that router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.

Question 577

At fictional Oakwell Public Works, the observed incident is: A third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. The diagnostic finding is: Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Which action AND separate measurable verification best address this case?

  1. For fictional Oakwell Public Works, hybrid connectivity engineering team: Action: Document supported NCC spoke types and network-to-network route propagation, then add a valid approved connectivity design. Independent proof: A test from the required source reaches the exact authorized destination and unrelated spokes remain isolated.
  2. For fictional Oakwell Public Works, hybrid connectivity engineering team: Action: Validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths. Independent proof: The intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.
  3. For fictional Oakwell Public Works, hybrid connectivity engineering team: Action: Configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy. Independent proof: An allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted.
  4. For fictional Oakwell Public Works, hybrid connectivity engineering team: Action: Align VLAN attachment, partner configuration and routing responsibilities with the contracted Layer 2 or Layer 3 service. Independent proof: The intended VPC learns validated routes through the active partner service without duplicate conflicting customer BGP sessions.

Explanation

Correct Answer

B:

Validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths. Confirm success only when the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance. The original finding was route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table.

Incorrect Answers

A:

Action: Document supported NCC spoke types and network-to-network route propagation, then add a valid approved connectivity design. Independent proof: A test from the required source reaches the exact authorized destination and unrelated spokes remain isolated. The pair does not resolve the observed route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Use validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths and verify the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

C:

The alternate plan combines Action: Configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy. Independent proof: An allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted. The identified fault is route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Closing it requires the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

D:

The alternative proposal is Action: Align VLAN attachment, partner configuration and routing responsibilities with the contracted Layer 2 or Layer 3 service. Independent proof: The intended VPC learns validated routes through the active partner service without duplicate conflicting customer BGP sessions. It does not address the current evidence: route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. The appropriate action is validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths.

Question 578

At fictional Pinecrest Digital, the multicloud backbone operations team operates BGP, HA VPN and interconnect recovery. A Google Cloud network issue is reported: A third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. The decisive observation is: Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Which scoped engineering response is most appropriate?

  1. For fictional Pinecrest Digital, multicloud backbone operations team: Configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy.
  2. For fictional Pinecrest Digital, multicloud backbone operations team: Document supported NCC spoke types and network-to-network route propagation, then add a valid approved connectivity design.
  3. For fictional Pinecrest Digital, multicloud backbone operations team: Validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths.
  4. For fictional Pinecrest Digital, multicloud backbone operations team: Align VLAN attachment, partner configuration and routing responsibilities with the contracted Layer 2 or Layer 3 service.

Explanation

Correct Answer

C:

The evidence that route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table points to the need to validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths. Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model. Success is measured by the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

Incorrect Answers

A:

Configure the supported NCC hybrid-spoke site-to-site data transfer model and verify network and firewall policy. It could be useful for another problem, but it does not change route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. The response needs to validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths.

B:

An alternative action is document supported NCC spoke types and network-to-network route propagation, then add a valid approved connectivity design. This incident instead involves route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Confirm the scoped change through the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

D:

Align VLAN attachment, partner configuration and routing responsibilities with the contracted Layer 2 or Layer 3 service. That would not correct the reported route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. The supported response is to validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths.

Question 579

The multicloud backbone operations team at fictional Pinecrest Digital investigates: A third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. Which particular observation would most directly distinguish the network cause before changing production resources?

  1. For fictional Pinecrest Digital, multicloud backbone operations team: Hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology.
  2. For fictional Pinecrest Digital, multicloud backbone operations team: Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table.
  3. For fictional Pinecrest Digital, multicloud backbone operations team: The effective route table has no advertised destination and the intended path depends on an unsupported combination of transitivity mechanisms.
  4. For fictional Pinecrest Digital, multicloud backbone operations team: Cloud Router learned route details and BGP attributes indicate route priorities or MED evaluation do not match the documented design.

Explanation

Correct Answer

B:

The diagnostic clue is route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model. The response should therefore focus on validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths.

Incorrect Answers

A:

Hub configuration and route tables show the required site-to-site data transfer behavior or spoke route exchange is not enabled for this topology. That finding does not isolate the reported issue: a third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. The determining evidence is route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table.

C:

That alternative instead describes the effective route table has no advertised destination and the intended path depends on an unsupported combination of transitivity mechanisms. The actual diagnostic record shows route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table instead. The difference matters because router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.

D:

Even if cloud Router learned route details and BGP attributes indicate route priorities or MED evaluation do not match the documented design, it would not establish the cause here. Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. The case-specific correction is to validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths.

Question 580

In fictional Pinecrest Digital, operators encountered: A third-party router appliance is attached as an NCC spoke but a remote region cannot learn its advertised service prefix. Evidence: Route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. They propose: Validate the supported router appliance spoke, BGP, and hub route exchange configuration before changing application paths. Which independent result best confirms the change works?

  1. For fictional Pinecrest Digital, multicloud backbone operations team: An allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted.
  2. For fictional Pinecrest Digital, multicloud backbone operations team: A test from the required source reaches the exact authorized destination and unrelated spokes remain isolated.
  3. For fictional Pinecrest Digital, multicloud backbone operations team: A controlled first-tunnel loss restores authorized application routing through the remaining permitted tunnel.
  4. For fictional Pinecrest Digital, multicloud backbone operations team: The intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

Explanation

Correct Answer

D:

The intended prefix appears in approved route inventories and test traffic traverses the authorized appliance. Without that result, the finding route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table would remain unresolved.

Incorrect Answers

A:

A test that an allowed branch-to-branch test passes through documented paths while disallowed traffic remains restricted would not demonstrate closure of this condition. The needed proof is the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

B:

A test from the required source reaches the exact authorized destination and unrelated spokes remain isolated. That does not demonstrate the case-specific success condition: the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance. Router appliances participate in NCC routing only under the documented spoke and control-plane attachment model.

C:

A controlled first-tunnel loss restores authorized application routing through the remaining permitted tunnel. That result does not test the original problem, identified by route advertisements and Cloud Router peering checks show the appliance prefix does not appear in the selected hub route table. Recovery must show that the intended prefix appears in approved route inventories and test traffic traverses the authorized appliance.

Professional Cloud Network Engineer Practice Tests