Fortinet NSE4_FGT_AD-7.6 Practice Test 47 - Prepaway
Practice Exams:

Pass Fortinet NSE4_FGT_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium File
$69.99 $76.99

NSE4_FGT_AD-7.6 Premium ETE File


  • Premium File 94 Questions & Answers. Last Update: Nov 19, 2026
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Fortinet NSE4_FGT_AD-7.6 Practice Test 47

Question 460

Packets are routed to an IPsec interface but the FortiGate denies traffic between the LAN and tunnel. Select TWO proposed actions that would undermine the required configuration, security boundary, or availability outcome.

  1. Assume the VPN wizard makes every future subnet and protocol automatically permitted.
  2. Create correctly scoped LAN-to-IPsec and required reverse-direction firewall policies without granting unrelated access.
  3. Inspect debug-flow policy ID, interface pair, source/destination objects and session logs.
  4. Add an unrestricted any-to-any policy across every site interface to bypass selector troubleshooting.
  5. Approved LAN-to-remote flows use the intended VPN policy and other source or service tests remain denied.

Explanation

Correct Answer

A:

Assume the VPN wizard makes every future subnet and protocol automatically permitted is also an unsafe shortcut for this particular scenario. Routing to a VPN interface does not automatically authorize forwarding through a stateful firewall policy. Approved LAN-to-remote flows use the intended VPN policy and other source or service tests remain denied.

D:

Add an unrestricted any-to-any policy across every site interface to bypass selector troubleshooting contradicts the goal of ipsec tunnel firewall policy. Routing to a VPN interface does not automatically authorize forwarding through a stateful firewall policy. A reliable alternative is Create correctly scoped LAN-to-IPsec and required reverse-direction firewall policies without granting unrelated access.

Incorrect Answers

B:

Create correctly scoped LAN-to-IPsec and required reverse-direction firewall policies without granting unrelated access is the appropriate remediation, not a shortcut that undermines it. It addresses the requirement because routing to a VPN interface does not automatically authorize forwarding through a stateful firewall policy.

C:

Inspect debug-flow policy ID, interface pair, source/destination objects and session logs is a diagnostic step intended to establish the real cause rather than circumvent a safeguard. The technical mechanism is: Routing to a VPN interface does not automatically authorize forwarding through a stateful firewall policy.

E:

Approved LAN-to-remote flows use the intended VPN policy and other source or service tests remain denied describes the required evidence of success, so it is not a risky change. The criterion verifies ipsec tunnel firewall policy after implementation.

Question 461

Branch hosts connect through IPsec but remote systems see a translated public IP rather than the original protected subnet. Which configuration or operational change most directly satisfies this requirement?

  1. Configure redundant tunnel paths and appropriate route, SD-WAN or health-based failover behavior.
  2. Disable or scope source NAT appropriately for the intended site-to-site VPN policy and selectors.
  3. Change the remote site's certificate trust list to correct an unintended source translation.
  4. Reuse an internet-outbound SNAT policy for all VPN traffic without considering selectors.

Explanation

Correct Answer

B:

Source NAT can alter the traffic identity expected by peers and their Phase 2 selectors. Confirm that the remote site sees the original allowed private source and the tunnel traffic selectors match the intended subnets. If the result fails, inspect source NAT settings, IP pool association, session translated tuple and proxy IDs.

Incorrect Answers

A:

The choice “Configure redundant tunnel paths and appropriate route, SD-WAN or health-based failover behavior” concerns redundant ipsec tunnels; it does not resolve the stated requirement. Source NAT can alter the traffic identity expected by peers and their Phase 2 selectors. Instead, disable or scope source NAT appropriately for the intended site-to-site VPN policy and selectors.

C:

Change the remote site's certificate trust list to correct an unintended source translation also leaves the required security or connectivity goal unmet. In this case source NAT can alter the traffic identity expected by peers and their Phase 2 selectors. Apply Disable or scope source NAT appropriately for the intended site-to-site VPN policy and selectors. and verify the intended result.

D:

“Reuse an internet-outbound SNAT policy for all VPN traffic without considering selectors” does not implement the control that the facts call for. Source NAT can alter the traffic identity expected by peers and their Phase 2 selectors. Instead, disable or scope source NAT appropriately for the intended site-to-site VPN policy and selectors.

Question 462

Branch hosts connect through IPsec but remote systems see a translated public IP rather than the original protected subnet. The problem remains after a proposed change. Which evidence should an administrator inspect first to isolate the relevant control-plane or data-plane cause?

  1. Review IKE negotiation debug, proposal lists, peer IKE version and rejection reason.
  2. Inspect NAT detection in IKE logs, UDP 500/4500 flows, upstream NAT state and tunnel counters.
  3. Inspect IKE phase and message sequence, peer proposal lists, version and authentication status.
  4. Inspect source NAT settings, IP pool association, session translated tuple and proxy IDs.

Explanation

Correct Answer

D:

Inspect source NAT settings, IP pool association, session translated tuple and proxy IDs is the most specific diagnostic for accidental nat of protected vpn traffic. Source NAT can alter the traffic identity expected by peers and their Phase 2 selectors. These checks can distinguish a misconfiguration from a passing state before testing: The remote site sees the original allowed private source and the tunnel traffic selectors match the intended subnets.

Incorrect Answers

A:

Review IKE negotiation debug, proposal lists, peer IKE version and rejection reason is useful when investigating ipsec ike cryptographic proposal compatibility, but it examines a different primary mechanism. Here the fault concerns accidental nat of protected vpn traffic, so the first direct inspection is Inspect source NAT settings, IP pool association, session translated tuple and proxy IDs.

B:

Inspect NAT detection in IKE logs, UDP 500/4500 flows, upstream NAT state and tunnel counters is useful when investigating nat traversal for ipsec peers, but it examines a different primary mechanism. Here the fault concerns accidental nat of protected vpn traffic, so the first direct inspection is Inspect source NAT settings, IP pool association, session translated tuple and proxy IDs.

C:

Inspect IKE phase and message sequence, peer proposal lists, version and authentication status is useful when investigating ike phase 1 log interpretation, but it examines a different primary mechanism. Here the fault concerns accidental nat of protected vpn traffic, so the first direct inspection is Inspect source NAT settings, IP pool association, session translated tuple and proxy IDs.

Question 463

Branch hosts connect through IPsec but remote systems see a translated public IP rather than the original protected subnet. Following remediation, which observation is the strongest end-to-end evidence that this particular requirement has been met?

  1. A controlled primary tunnel outage sends new protected flows through the secondary tunnel without leaking into the public default route.
  2. The remote site sees the original allowed private source and the tunnel traffic selectors match the intended subnets.
  3. An authorized connection attempt creates a stable authenticated IKE security association on both peers.
  4. A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior.

Explanation

Correct Answer

B:

The remote site sees the original allowed private source and the tunnel traffic selectors match the intended subnets is an acceptance criterion specific to accidental nat of protected vpn traffic. Source NAT can alter the traffic identity expected by peers and their Phase 2 selectors.

Incorrect Answers

A:

A controlled primary tunnel outage sends new protected flows through the secondary tunnel without leaking into the public default route can verify redundant ipsec tunnels and failover, but does not establish the required behavior for accidental nat of protected vpn traffic. The remote site sees the original allowed private source and the tunnel traffic selectors match the intended subnets.

C:

An authorized connection attempt creates a stable authenticated IKE security association on both peers can verify ipsec phase 1 peer authentication, but does not establish the required behavior for accidental nat of protected vpn traffic. The remote site sees the original allowed private source and the tunnel traffic selectors match the intended subnets.

D:

A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior can verify ipsec dead peer detection, but does not establish the required behavior for accidental nat of protected vpn traffic. The remote site sees the original allowed private source and the tunnel traffic selectors match the intended subnets.

Question 464

Branch hosts connect through IPsec but remote systems see a translated public IP rather than the original protected subnet. Which technical principle best explains why the appropriate remediation works?

  1. Source NAT can alter the traffic identity expected by peers and their Phase 2 selectors.
  2. Identical overlapping prefixes create ambiguous forwarding across VPNs until address design or controlled translation resolves them.
  3. A working Phase 1 peer relationship does not guarantee a Phase 2 SA for mismatched protected traffic ranges.
  4. Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly.

Explanation

Correct Answer

A:

Source NAT can alter the traffic identity expected by peers and their Phase 2 selectors. Disable or scope source NAT appropriately for the intended site-to-site VPN policy and selectors.

Incorrect Answers

B:

Identical overlapping prefixes create ambiguous forwarding across VPNs until address design or controlled translation resolves them is relevant to overlapping subnets across ipsec, but it does not explain the control required for accidental nat of protected vpn traffic in this scenario. Instead, source NAT can alter the traffic identity expected by peers and their Phase 2 selectors.

C:

A working Phase 1 peer relationship does not guarantee a Phase 2 SA for mismatched protected traffic ranges is relevant to ipsec phase 2 traffic selectors, but it does not explain the control required for accidental nat of protected vpn traffic in this scenario. Instead, source NAT can alter the traffic identity expected by peers and their Phase 2 selectors.

D:

Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly is relevant to ipsec dead peer detection, but it does not explain the control required for accidental nat of protected vpn traffic in this scenario. Instead, source NAT can alter the traffic identity expected by peers and their Phase 2 selectors.

Question 465

Branch hosts connect through IPsec but remote systems see a translated public IP rather than the original protected subnet. Select TWO proposed actions that would undermine the required configuration, security boundary, or availability outcome.

  1. Inspect source NAT settings, IP pool association, session translated tuple and proxy IDs.
  2. The remote site sees the original allowed private source and the tunnel traffic selectors match the intended subnets.
  3. Reuse an internet-outbound SNAT policy for all VPN traffic without considering selectors.
  4. Change the remote site's certificate trust list to correct an unintended source translation.
  5. Disable or scope source NAT appropriately for the intended site-to-site VPN policy and selectors.

Explanation

Correct Answer

C:

Reuse an internet-outbound SNAT policy for all VPN traffic without considering selectors contradicts the goal of accidental nat of protected vpn traffic. Source NAT can alter the traffic identity expected by peers and their Phase 2 selectors. A reliable alternative is Disable or scope source NAT appropriately for the intended site-to-site VPN policy and selectors.

D:

Change the remote site's certificate trust list to correct an unintended source translation is also an unsafe shortcut for this particular scenario. Source NAT can alter the traffic identity expected by peers and their Phase 2 selectors. The remote site sees the original allowed private source and the tunnel traffic selectors match the intended subnets.

Incorrect Answers

A:

Inspect source NAT settings, IP pool association, session translated tuple and proxy IDs is a diagnostic step intended to establish the real cause rather than circumvent a safeguard. The technical mechanism is: Source NAT can alter the traffic identity expected by peers and their Phase 2 selectors.

B:

The remote site sees the original allowed private source and the tunnel traffic selectors match the intended subnets describes the required evidence of success, so it is not a risky change. The criterion verifies accidental nat of protected vpn traffic after implementation.

E:

Disable or scope source NAT appropriately for the intended site-to-site VPN policy and selectors is the appropriate remediation, not a shortcut that undermines it. It addresses the requirement because source NAT can alter the traffic identity expected by peers and their Phase 2 selectors.

Question 466

A tunnel remains listed as established after the remote peer goes offline, delaying the detection of an unusable path. Which configuration or operational change most directly satisfies this requirement?

  1. Configure and test supported dead peer detection behavior and a suitable failover process.
  2. Use a web filtering profile as the only mechanism for VPN peer liveness.
  3. Design explicit nonoverlapping translation or renumbering with coordinated selectors, routes and policies.
  4. Disable all peer detection and assume idle tunnels are always healthy.

Explanation

Correct Answer

A:

Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly. Confirm that a controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior.

Incorrect Answers

B:

Use a web filtering profile as the only mechanism for VPN peer liveness also leaves the required security or connectivity goal unmet. In this case dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly. Apply Configure and test supported dead peer detection behavior and a suitable failover process. and verify the intended result.

C:

“Design explicit nonoverlapping translation or renumbering with coordinated selectors, routes and policies” pertains to overlapping subnets across ipsec, not the deciding condition here. Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly. Instead, configure and test supported dead peer detection behavior and a suitable failover process.

D:

“Disable all peer detection and assume idle tunnels are always healthy” would not meet the requirement. Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly. Instead, configure and test supported dead peer detection behavior and a suitable failover process.

Question 467

A tunnel remains listed as established after the remote peer goes offline, delaying the detection of an unusable path. The problem remains after a proposed change. Which evidence should an administrator inspect first to isolate the relevant control-plane or data-plane cause?

  1. Inspect proxy IDs or selectors, negotiated child SAs, peer routing, and Phase 2 mismatch logs.
  2. Inspect tunnel status, route distance or SD-WAN health, selectors, firewall policies and packet counters.
  3. Inspect DPD mode, retry timings, IKE logs and link failure timestamps.
  4. Inspect Phase 2 logs, negotiated selectors, child-SA state, and source/destination tuples.

Explanation

Correct Answer

C:

Inspect DPD mode, retry timings, IKE logs and link failure timestamps is the most specific diagnostic for ipsec dead peer detection. Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly. These checks can distinguish a misconfiguration from a passing state before testing: A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior.

Incorrect Answers

A:

Inspect proxy IDs or selectors, negotiated child SAs, peer routing, and Phase 2 mismatch logs is useful when investigating ipsec phase 2 traffic selectors, but it examines a different primary mechanism. Here the fault concerns ipsec dead peer detection, so the first direct inspection is Inspect DPD mode, retry timings, IKE logs and link failure timestamps.

B:

Inspect tunnel status, route distance or SD-WAN health, selectors, firewall policies and packet counters is useful when investigating redundant ipsec tunnels and failover, but it examines a different primary mechanism. Here the fault concerns ipsec dead peer detection, so the first direct inspection is Inspect DPD mode, retry timings, IKE logs and link failure timestamps.

D:

Inspect Phase 2 logs, negotiated selectors, child-SA state, and source/destination tuples is useful when investigating ipsec phase 2 diagnostics, but it examines a different primary mechanism. Here the fault concerns ipsec dead peer detection, so the first direct inspection is Inspect DPD mode, retry timings, IKE logs and link failure timestamps.

Question 468

A tunnel remains listed as established after the remote peer goes offline, delaying the detection of an unusable path. Following remediation, which observation is the strongest end-to-end evidence that this particular requirement has been met?

  1. A client in each site reaches the correct remote host through unique translated or readdressed networks.
  2. A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior.
  3. Phase 1/2 establish and encrypted payload counters increase over the NATed path.
  4. Phase 1 establishes under the required approved algorithms and a controlled connection test is successful.

Explanation

Correct Answer

B:

A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior is an acceptance criterion specific to ipsec dead peer detection. Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly.

Incorrect Answers

A:

A client in each site reaches the correct remote host through unique translated or readdressed networks can verify overlapping subnets across ipsec, but does not establish the required behavior for ipsec dead peer detection. A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior.

C:

Phase 1/2 establish and encrypted payload counters increase over the NATed path can verify nat traversal for ipsec peers, but does not establish the required behavior for ipsec dead peer detection. A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior.

D:

Phase 1 establishes under the required approved algorithms and a controlled connection test is successful can verify ipsec ike cryptographic proposal compatibility, but does not establish the required behavior for ipsec dead peer detection. A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior.

Question 469

A tunnel remains listed as established after the remote peer goes offline, delaying the detection of an unusable path. Which technical principle best explains why the appropriate remediation works?

  1. Route-based VPN forwarding relies on routing and policy decisions even after the encryption tunnel exists.
  2. Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly.
  3. NAT traversal encapsulates IPsec traffic in UDP when NAT on the path prevents direct ESP handling.
  4. A failure in initial IKE negotiation must be resolved before Phase 2 security association and data routing checks matter.

Explanation

Correct Answer

B:

Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly. Configure and test supported dead peer detection behavior and a suitable failover process. The decisive evidence is that a controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior.

Incorrect Answers

A:

Route-based VPN forwarding relies on routing and policy decisions even after the encryption tunnel exists is relevant to route-based ipsec forwarding, but it does not explain the control required for ipsec dead peer detection in this scenario. Instead, dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly.

C:

NAT traversal encapsulates IPsec traffic in UDP when NAT on the path prevents direct ESP handling is relevant to nat traversal for ipsec peers, but it does not explain the control required for ipsec dead peer detection in this scenario. Instead, dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly.

D:

A failure in initial IKE negotiation must be resolved before Phase 2 security association and data routing checks matter is relevant to ike phase 1 log interpretation, but it does not explain the control required for ipsec dead peer detection in this scenario. Instead, dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly.

Question 470

A tunnel remains listed as established after the remote peer goes offline, delaying the detection of an unusable path. Select TWO proposed actions that would undermine the required configuration, security boundary, or availability outcome.

  1. Configure and test supported dead peer detection behavior and a suitable failover process.
  2. A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior.
  3. Disable all peer detection and assume idle tunnels are always healthy.
  4. Inspect DPD mode, retry timings, IKE logs and link failure timestamps.
  5. Use a web filtering profile as the only mechanism for VPN peer liveness.

Explanation

Correct Answer

C:

Disable all peer detection and assume idle tunnels are always healthy contradicts the goal of ipsec dead peer detection. Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly. A reliable alternative is Configure and test supported dead peer detection behavior and a suitable failover process.

E:

Use a web filtering profile as the only mechanism for VPN peer liveness is also an unsafe shortcut for this particular scenario. Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly. A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior.

Incorrect Answers

A:

Configure and test supported dead peer detection behavior and a suitable failover process is the appropriate remediation, not a shortcut that undermines it. It addresses the requirement because dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly.

B:

A controlled peer outage produces a dead-peer event and the expected recovery or backup routing behavior describes the required evidence of success, so it is not a risky change. The criterion verifies ipsec dead peer detection after implementation.

D:

Inspect DPD mode, retry timings, IKE logs and link failure timestamps is a diagnostic step intended to establish the real cause rather than circumvent a safeguard. The technical mechanism is: Dead peer detection probes peer responsiveness; a static configuration does not guarantee that an unreachable remote is identified promptly.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests