Fortinet NSE4_FGT_AD-7.6 Practice Test 40 - Prepaway
Practice Exams:

Pass Fortinet NSE4_FGT_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium File
$69.99 $76.99

NSE4_FGT_AD-7.6 Premium ETE File


  • Premium File 94 Questions & Answers. Last Update: Nov 19, 2026
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Fortinet NSE4_FGT_AD-7.6 Practice Test 40

Question 390

Two static routes have the same destination prefix and distance, and a network team expects a chosen egress interface to win. Select TWO proposed actions that would undermine the required configuration, security boundary, or availability outcome.

  1. Change a user's web filter profile to choose which equal-distance next hop wins.
  2. A routing-table comparison shows the intended preferred egress and an authorized test flow follows it.
  3. Review static route priority values and set the intended priority among otherwise equivalent candidate routes.
  4. Assume a higher numerical route priority always wins over a lower numerical value.
  5. Inspect route prefix, distance, priority, gateway resolution and session egress.

Explanation

Correct Answer

A:

Change a user's web filter profile to choose which equal-distance next hop wins is also an unsafe shortcut for this particular scenario. FortiGate route priority can differentiate eligible routes with equal prefix and distance rather than overriding prefix specificity. A routing-table comparison shows the intended preferred egress and an authorized test flow follows it.

D:

Assume a higher numerical route priority always wins over a lower numerical value contradicts the goal of route priority tie breaker. FortiGate route priority can differentiate eligible routes with equal prefix and distance rather than overriding prefix specificity. A reliable alternative is Review static route priority values and set the intended priority among otherwise equivalent candidate routes.

Incorrect Answers

B:

A routing-table comparison shows the intended preferred egress and an authorized test flow follows it describes the required evidence of success, so it is not a risky change. The criterion verifies route priority tie breaker after implementation.

C:

Review static route priority values and set the intended priority among otherwise equivalent candidate routes is the appropriate remediation, not a shortcut that undermines it. It addresses the requirement because fortiGate route priority can differentiate eligible routes with equal prefix and distance rather than overriding prefix specificity.

E:

Inspect route prefix, distance, priority, gateway resolution and session egress is a diagnostic step intended to establish the real cause rather than circumvent a safeguard. The technical mechanism is: FortiGate route priority can differentiate eligible routes with equal prefix and distance rather than overriding prefix specificity.

Question 391

Two healthy equal-cost links should both carry sessions, but traffic remains pinned to one link because route eligibility differs. Which configuration or operational change most directly satisfies this requirement?

  1. Validate ECMP-eligible routes and the configured load-balancing method before judging distribution.
  2. Configure and test a scoped policy route or SD-WAN rule appropriate to its source, destination and service requirements.
  3. Configure unequal route distances and expect equal-cost distribution without other mechanisms.
  4. Assume ECMP duplicates each packet simultaneously across both links for reliability.

Explanation

Correct Answer

A:

Equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths. Confirm that distinct test flows use eligible WAN paths while established sessions remain consistent with the selected hashing behavior. If the result fails, review effective equal-cost routes, ECMP settings, session egress and interface counters.

Incorrect Answers

B:

The choice “Configure and test a scoped policy route or SD-WAN rule appropriate to its source, destination and service requirements” concerns policy-based routing precedence; it does not resolve the stated requirement. Equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths. Instead, validate ECMP-eligible routes and the configured load-balancing method before judging distribution.

C:

Configure unequal route distances and expect equal-cost distribution without other mechanisms also leaves the required security or connectivity goal unmet. In this case equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths. Apply Validate ECMP-eligible routes and the configured load-balancing method before judging distribution. and verify the intended result.

D:

“Assume ECMP duplicates each packet simultaneously across both links for reliability” would not meet the requirement. Equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths. Instead, validate ECMP-eligible routes and the configured load-balancing method before judging distribution.

Question 392

Two healthy equal-cost links should both carry sessions, but traffic remains pinned to one link because route eligibility differs. The problem remains after a proposed change. Which evidence should an administrator inspect first to isolate the relevant control-plane or data-plane cause?

  1. Inspect route installation before and after failover, prefix specificity, blackhole action and outgoing packet capture.
  2. Inspect the routing table prefix lengths, active gateway, interface, and packet trace.
  3. Inspect SD-WAN members and zones, route-table participation, firewall policy egress zone and gateway health.
  4. Review effective equal-cost routes, ECMP settings, session egress and interface counters.

Explanation

Correct Answer

D:

Review effective equal-cost routes, ECMP settings, session egress and interface counters is the most specific diagnostic for equal-cost multi-path routing. Equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths. These checks can distinguish a misconfiguration from a passing state before testing: Distinct test flows use eligible WAN paths while established sessions remain consistent with the selected hashing behavior.

Incorrect Answers

A:

Inspect route installation before and after failover, prefix specificity, blackhole action and outgoing packet capture is useful when investigating blackhole route against stale destinations, but it examines a different primary mechanism. Here the fault concerns equal-cost multi-path routing, so the first direct inspection is Review effective equal-cost routes, ECMP settings, session egress and interface counters.

B:

Inspect the routing table prefix lengths, active gateway, interface, and packet trace is useful when investigating longest-prefix route selection, but it examines a different primary mechanism. Here the fault concerns equal-cost multi-path routing, so the first direct inspection is Review effective equal-cost routes, ECMP settings, session egress and interface counters.

C:

Inspect SD-WAN members and zones, route-table participation, firewall policy egress zone and gateway health is useful when investigating sd-wan membership and route reachability, but it examines a different primary mechanism. Here the fault concerns equal-cost multi-path routing, so the first direct inspection is Review effective equal-cost routes, ECMP settings, session egress and interface counters.

Question 393

Two healthy equal-cost links should both carry sessions, but traffic remains pinned to one link because route eligibility differs. Following remediation, which observation is the strongest end-to-end evidence that this particular requirement has been met?

  1. Distinct test flows use eligible WAN paths while established sessions remain consistent with the selected hashing behavior.
  2. The finance flow follows the designated egress while other traffic retains ordinary routing behavior.
  3. Disabling the primary's upstream path triggers backup member selection and restored health follows the expected recovery policy.
  4. A trace to an external address follows the approved WAN gateway and returns successfully.

Explanation

Correct Answer

A:

Distinct test flows use eligible WAN paths while established sessions remain consistent with the selected hashing behavior is an acceptance criterion specific to equal-cost multi-path routing. Equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths.

Incorrect Answers

B:

The finance flow follows the designated egress while other traffic retains ordinary routing behavior can verify policy-based routing precedence, but does not establish the required behavior for equal-cost multi-path routing. Distinct test flows use eligible WAN paths while established sessions remain consistent with the selected hashing behavior.

C:

Disabling the primary's upstream path triggers backup member selection and restored health follows the expected recovery policy can verify sd-wan failover investigation, but does not establish the required behavior for equal-cost multi-path routing. Distinct test flows use eligible WAN paths while established sessions remain consistent with the selected hashing behavior.

D:

A trace to an external address follows the approved WAN gateway and returns successfully can verify default route and upstream gateway, but does not establish the required behavior for equal-cost multi-path routing. Distinct test flows use eligible WAN paths while established sessions remain consistent with the selected hashing behavior.

Question 394

Two healthy equal-cost links should both carry sessions, but traffic remains pinned to one link because route eligibility differs. Which technical principle best explains why the appropriate remediation works?

  1. A blackhole route discards matching destinations deliberately, preventing fallback to an unsafe broader route.
  2. Reverse path forwarding checks help prevent spoofed source traffic and may reject packets when reverse-route expectations fail.
  3. Among comparable routes to the same prefix, lower administrative distance generally wins route selection if the route is eligible.
  4. Equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths.

Explanation

Correct Answer

D:

Equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths. Validate ECMP-eligible routes and the configured load-balancing method before judging distribution.

Incorrect Answers

A:

A blackhole route discards matching destinations deliberately, preventing fallback to an unsafe broader route is relevant to blackhole route against stale destinations, but it does not explain the control required for equal-cost multi-path routing in this scenario. Instead, equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths.

B:

Reverse path forwarding checks help prevent spoofed source traffic and may reject packets when reverse-route expectations fail is relevant to reverse path forwarding checks, but it does not explain the control required for equal-cost multi-path routing in this scenario. Instead, equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths.

C:

Among comparable routes to the same prefix, lower administrative distance generally wins route selection if the route is eligible is relevant to administrative distance between static routes, but it does not explain the control required for equal-cost multi-path routing in this scenario. Instead, equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths.

Question 395

Two healthy equal-cost links should both carry sessions, but traffic remains pinned to one link because route eligibility differs. Select TWO proposed actions that would undermine the required configuration, security boundary, or availability outcome.

  1. Distinct test flows use eligible WAN paths while established sessions remain consistent with the selected hashing behavior.
  2. Validate ECMP-eligible routes and the configured load-balancing method before judging distribution.
  3. Review effective equal-cost routes, ECMP settings, session egress and interface counters.
  4. Configure unequal route distances and expect equal-cost distribution without other mechanisms.
  5. Assume ECMP duplicates each packet simultaneously across both links for reliability.

Explanation

Correct Answer

D:

Configure unequal route distances and expect equal-cost distribution without other mechanisms is also an unsafe shortcut for this particular scenario. Equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths. Distinct test flows use eligible WAN paths while established sessions remain consistent with the selected hashing behavior.

E:

Assume ECMP duplicates each packet simultaneously across both links for reliability contradicts the goal of equal-cost multi-path routing. Equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths. A reliable alternative is Validate ECMP-eligible routes and the configured load-balancing method before judging distribution.

Incorrect Answers

A:

Distinct test flows use eligible WAN paths while established sessions remain consistent with the selected hashing behavior describes the required evidence of success, so it is not a risky change. The criterion verifies equal-cost multi-path routing after implementation.

B:

Validate ECMP-eligible routes and the configured load-balancing method before judging distribution is the appropriate remediation, not a shortcut that undermines it. It addresses the requirement because equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths.

C:

Review effective equal-cost routes, ECMP settings, session egress and interface counters is a diagnostic step intended to establish the real cause rather than circumvent a safeguard. The technical mechanism is: Equal-cost multipath requires compatible eligible routes and distributes sessions according to a selection method rather than copying every packet to both paths.

Question 396

A new branch FortiGate can reach its internal VLANs but cannot send internet-bound traffic to an ISP gateway. Which configuration or operational change most directly satisfies this requirement?

  1. Add only a DNS hostname to the system settings and assume it creates a default route.
  2. Configure an appropriate default route to a reachable next hop on the designated WAN interface.
  3. Point the default route to an unreachable private address with no adjacency or route.
  4. Confirm the reverse route toward the source, anti-spoofing and intended asymmetric topology rather than suppressing validation broadly.

Explanation

Correct Answer

B:

A default route provides a fallback forwarding decision for destinations with no more specific route. Confirm that a trace to an external address follows the approved WAN gateway and returns successfully. If the result fails, inspect the active default route, gateway ARP reachability, interface status and traceroute.

Incorrect Answers

A:

“Add only a DNS hostname to the system settings and assume it creates a default route” would not meet the requirement. A default route provides a fallback forwarding decision for destinations with no more specific route. Instead, configure an appropriate default route to a reachable next hop on the designated WAN interface.

C:

Point the default route to an unreachable private address with no adjacency or route also leaves the required security or connectivity goal unmet. In this case a default route provides a fallback forwarding decision for destinations with no more specific route. Apply Configure an appropriate default route to a reachable next hop on the designated WAN interface. and verify the intended result.

D:

The choice “Confirm the reverse route toward the source, anti-spoofing and intended asymmetric topology rather than suppressing validation broadly” concerns reverse path forwarding checks; it does not resolve the stated requirement. A default route provides a fallback forwarding decision for destinations with no more specific route. Instead, configure an appropriate default route to a reachable next hop on the designated WAN interface.

Question 397

A new branch FortiGate can reach its internal VLANs but cannot send internet-bound traffic to an ISP gateway. The problem remains after a proposed change. Which evidence should an administrator inspect first to isolate the relevant control-plane or data-plane cause?

  1. Inspect SLA probe targets, loss/latency/jitter history, rule strategy and selected member counters.
  2. Review route distance, reachability, installed routing entries, and interface status.
  3. Inspect policy-route matches, priority, active routing table, session egress and route diagnostics.
  4. Inspect the active default route, gateway ARP reachability, interface status and traceroute.

Explanation

Correct Answer

D:

Inspect the active default route, gateway ARP reachability, interface status and traceroute is the most specific diagnostic for default route and upstream gateway. A default route provides a fallback forwarding decision for destinations with no more specific route. These checks can distinguish a misconfiguration from a passing state before testing: A trace to an external address follows the approved WAN gateway and returns successfully.

Incorrect Answers

A:

Inspect SLA probe targets, loss/latency/jitter history, rule strategy and selected member counters is useful when investigating sd-wan performance sla health, but it examines a different primary mechanism. Here the fault concerns default route and upstream gateway, so the first direct inspection is Inspect the active default route, gateway ARP reachability, interface status and traceroute.

B:

Review route distance, reachability, installed routing entries, and interface status is useful when investigating administrative distance between static routes, but it examines a different primary mechanism. Here the fault concerns default route and upstream gateway, so the first direct inspection is Inspect the active default route, gateway ARP reachability, interface status and traceroute.

C:

Inspect policy-route matches, priority, active routing table, session egress and route diagnostics is useful when investigating policy-based routing precedence, but it examines a different primary mechanism. Here the fault concerns default route and upstream gateway, so the first direct inspection is Inspect the active default route, gateway ARP reachability, interface status and traceroute.

Question 398

A new branch FortiGate can reach its internal VLANs but cannot send internet-bound traffic to an ISP gateway. Following remediation, which observation is the strongest end-to-end evidence that this particular requirement has been met?

  1. A trace to an external address follows the approved WAN gateway and returns successfully.
  2. The legitimate source passes an appropriate RPF test and a spoofed-source probe remains denied.
  3. When private connectivity fails, packets for the protected prefix are dropped rather than exiting the public WAN.
  4. Traffic to the /24 uses the intended next hop while unrelated destinations follow the default route.

Explanation

Correct Answer

A:

A trace to an external address follows the approved WAN gateway and returns successfully is an acceptance criterion specific to default route and upstream gateway. A default route provides a fallback forwarding decision for destinations with no more specific route.

Incorrect Answers

B:

The legitimate source passes an appropriate RPF test and a spoofed-source probe remains denied can verify reverse path forwarding checks, but does not establish the required behavior for default route and upstream gateway. A trace to an external address follows the approved WAN gateway and returns successfully.

C:

When private connectivity fails, packets for the protected prefix are dropped rather than exiting the public WAN can verify blackhole route against stale destinations, but does not establish the required behavior for default route and upstream gateway. A trace to an external address follows the approved WAN gateway and returns successfully.

D:

Traffic to the /24 uses the intended next hop while unrelated destinations follow the default route can verify longest-prefix route selection, but does not establish the required behavior for default route and upstream gateway. A trace to an external address follows the approved WAN gateway and returns successfully.

Question 399

A new branch FortiGate can reach its internal VLANs but cannot send internet-bound traffic to an ISP gateway. Which technical principle best explains why the appropriate remediation works?

  1. Policy steering can select a forwarding path based on packet attributes beyond the destination prefix when properly matched.
  2. A default route provides a fallback forwarding decision for destinations with no more specific route.
  3. SD-WAN rules operate on correctly enrolled members and require a usable route and policy path to the zone.
  4. FortiGate route priority can differentiate eligible routes with equal prefix and distance rather than overriding prefix specificity.

Explanation

Correct Answer

B:

A default route provides a fallback forwarding decision for destinations with no more specific route. Configure an appropriate default route to a reachable next hop on the designated WAN interface.

Incorrect Answers

A:

Policy steering can select a forwarding path based on packet attributes beyond the destination prefix when properly matched is relevant to policy-based routing precedence, but it does not explain the control required for default route and upstream gateway in this scenario. Instead, a default route provides a fallback forwarding decision for destinations with no more specific route.

C:

SD-WAN rules operate on correctly enrolled members and require a usable route and policy path to the zone is relevant to sd-wan membership and route reachability, but it does not explain the control required for default route and upstream gateway in this scenario. Instead, a default route provides a fallback forwarding decision for destinations with no more specific route.

D:

FortiGate route priority can differentiate eligible routes with equal prefix and distance rather than overriding prefix specificity is relevant to route priority tie breaker, but it does not explain the control required for default route and upstream gateway in this scenario. Instead, a default route provides a fallback forwarding decision for destinations with no more specific route.

Question 400

A new branch FortiGate can reach its internal VLANs but cannot send internet-bound traffic to an ISP gateway. Select TWO proposed actions that would undermine the required configuration, security boundary, or availability outcome.

  1. A trace to an external address follows the approved WAN gateway and returns successfully.
  2. Point the default route to an unreachable private address with no adjacency or route.
  3. Configure an appropriate default route to a reachable next hop on the designated WAN interface.
  4. Inspect the active default route, gateway ARP reachability, interface status and traceroute.
  5. Add only a DNS hostname to the system settings and assume it creates a default route.

Explanation

Correct Answer

B:

Point the default route to an unreachable private address with no adjacency or route is also an unsafe shortcut for this particular scenario. A default route provides a fallback forwarding decision for destinations with no more specific route. A trace to an external address follows the approved WAN gateway and returns successfully.

E:

Add only a DNS hostname to the system settings and assume it creates a default route contradicts the goal of default route and upstream gateway. A default route provides a fallback forwarding decision for destinations with no more specific route. A reliable alternative is Configure an appropriate default route to a reachable next hop on the designated WAN interface.

Incorrect Answers

A:

A trace to an external address follows the approved WAN gateway and returns successfully describes the required evidence of success, so it is not a risky change. The criterion verifies default route and upstream gateway after implementation.

C:

Configure an appropriate default route to a reachable next hop on the designated WAN interface is the appropriate remediation, not a shortcut that undermines it. It addresses the requirement because a default route provides a fallback forwarding decision for destinations with no more specific route.

D:

Inspect the active default route, gateway ARP reachability, interface status and traceroute is a diagnostic step intended to establish the real cause rather than circumvent a safeguard. The technical mechanism is: A default route provides a fallback forwarding decision for destinations with no more specific route.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests