Pass Fortinet NSE4_FGT_AD-7.6 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Fortinet NSE4_FGT_AD-7.6 Practice Test 35
Question 340
A broad IPS sensor blocks business traffic because an irrelevant signature group is enabled for the protected service. Select TWO proposed actions that would undermine the required configuration, security boundary, or availability outcome.
Explanation
Correct Answer
Trust a signature's high-severity label as proof it applies to every protected application is also an unsafe shortcut for this particular scenario. Signature applicability and action policy affect false positives and coverage; a generic severity setting is not application context. Targeted legitimate traffic passes and applicable exploit patterns remain detected under the tuned profile.
Disable the entire IPS sensor after one false-positive event with no impact analysis contradicts the goal of ips signature severity and applicability. Signature applicability and action policy affect false positives and coverage; a generic severity setting is not application context. A reliable alternative is Refine the IPS sensor by applicable targets, severity, signatures and approved exclusions instead of disabling all IPS.
Incorrect Answers
Refine the IPS sensor by applicable targets, severity, signatures and approved exclusions instead of disabling all IPS is the appropriate remediation, not a shortcut that undermines it. It addresses the requirement because signature applicability and action policy affect false positives and coverage; a generic severity setting is not application context.
Targeted legitimate traffic passes and applicable exploit patterns remain detected under the tuned profile describes the required evidence of success, so it is not a risky change. The criterion verifies ips signature severity and applicability after implementation.
Review triggered signature IDs, attack context, target service, sensor filters, and IPS actions is a diagnostic step intended to establish the real cause rather than circumvent a safeguard. The technical mechanism is: Signature applicability and action policy affect false positives and coverage; a generic severity setting is not application context.
Question 341
A known attack signature appears in FortiGate IPS logs, but malicious test traffic continues because the sensor is in monitor mode. Which configuration or operational change most directly satisfies this requirement?
Explanation
Correct Answer
An IPS monitor action observes events but does not itself prevent the identified session from proceeding. The approved exploit test is blocked with a matching IPS log and normal application tests still succeed.
Incorrect Answers
“Leave the signature set to monitor and call the alert a successful block” does not implement the control that the facts call for. An IPS monitor action observes events but does not itself prevent the identified session from proceeding. Instead, set the intended signature action to block on the matching IPS sensor and validate against authorized test traffic.
Remove IPS logging to hide the continued attack rather than enforcing the intended action also leaves the required security or connectivity goal unmet. In this case an IPS monitor action observes events but does not itself prevent the identified session from proceeding. Apply Set the intended signature action to block on the matching IPS sensor and validate against authorized test traffic. and verify the intended result.
“Apply the correct inspection profile to the actually matching forward policy and validate policy order” pertains to security profile policy attachment, not the deciding condition here. An IPS monitor action observes events but does not itself prevent the identified session from proceeding. Instead, set the intended signature action to block on the matching IPS sensor and validate against authorized test traffic.
Question 342
A known attack signature appears in FortiGate IPS logs, but malicious test traffic continues because the sensor is in monitor mode. The problem remains after a proposed change. Which evidence should an administrator inspect first to isolate the relevant control-plane or data-plane cause?
Explanation
Correct Answer
Inspect signature action, sensor policy association, event subtype and session result is the most specific diagnostic for ips monitor versus block. An IPS monitor action observes events but does not itself prevent the identified session from proceeding. These checks can distinguish a misconfiguration from a passing state before testing: The approved exploit test is blocked with a matching IPS log and normal application tests still succeed.
Incorrect Answers
Inspect web filter policy ID, user/IP identity, policy sequence and applied web profile is useful when investigating web filter event policy attribution, but it examines a different primary mechanism. Here the fault concerns ips monitor versus block, so the first direct inspection is Inspect signature action, sensor policy association, event subtype and session result.
Inspect the specific IPS signature ID, source and destination scope, exception order and audit logs is useful when investigating ips false positive exception, but it examines a different primary mechanism. Here the fault concerns ips monitor versus block, so the first direct inspection is Inspect signature action, sensor policy association, event subtype and session result.
Inspect the application's pinning behavior, TLS error details, inspection exemptions and affected host identifiers is useful when investigating certificate-pinned application exception, but it examines a different primary mechanism. Here the fault concerns ips monitor versus block, so the first direct inspection is Inspect signature action, sensor policy association, event subtype and session result.
Question 343
A known attack signature appears in FortiGate IPS logs, but malicious test traffic continues because the sensor is in monitor mode. Following remediation, which observation is the strongest end-to-end evidence that this particular requirement has been met?
Explanation
Correct Answer
The approved exploit test is blocked with a matching IPS log and normal application tests still succeed is an acceptance criterion specific to ips monitor versus block. An IPS monitor action observes events but does not itself prevent the identified session from proceeding.
Incorrect Answers
The test flow logs the intended policy ID and profile-specific inspection result can verify security profile policy attachment, but does not establish the required behavior for ips monitor versus block. The approved exploit test is blocked with a matching IPS log and normal application tests still succeed.
The required application works and negative tests confirm other domains still undergo their intended filtering can verify web filter exemption scope, but does not establish the required behavior for ips monitor versus block. The approved exploit test is blocked with a matching IPS log and normal application tests still succeed.
A permitted test path is allowed and a restricted path on the same TLS host is blocked under the approved inspection policy can verify certificate inspection versus deep inspection, but does not establish the required behavior for ips monitor versus block. The approved exploit test is blocked with a matching IPS log and normal application tests still succeed.
Question 344
A known attack signature appears in FortiGate IPS logs, but malicious test traffic continues because the sensor is in monitor mode. Which technical principle best explains why the appropriate remediation works?
Explanation
Correct Answer
An IPS monitor action observes events but does not itself prevent the identified session from proceeding. Set the intended signature action to block on the matching IPS sensor and validate against authorized test traffic.
Incorrect Answers
A genuinely invalid upstream certificate is a different problem from clients not trusting the FortiGate inspection CA is relevant to invalid upstream server certificate, but it does not explain the control required for ips monitor versus block in this scenario. Instead, an IPS monitor action observes events but does not itself prevent the identified session from proceeding.
TLS certificate metadata can identify host context but cannot reveal the full encrypted HTTP request path by itself is relevant to https url-path inspection limitation, but it does not explain the control required for ips monitor versus block in this scenario. Instead, an IPS monitor action observes events but does not itself prevent the identified session from proceeding.
FortiGuard ratings can be overridden deliberately, but an override should not erase broader controls without review is relevant to category override for business url, but it does not explain the control required for ips monitor versus block in this scenario. Instead, an IPS monitor action observes events but does not itself prevent the identified session from proceeding.
Question 345
A known attack signature appears in FortiGate IPS logs, but malicious test traffic continues because the sensor is in monitor mode. Select TWO proposed actions that would undermine the required configuration, security boundary, or availability outcome.
Explanation
Correct Answer
Remove IPS logging to hide the continued attack rather than enforcing the intended action is also an unsafe shortcut for this particular scenario. An IPS monitor action observes events but does not itself prevent the identified session from proceeding. The approved exploit test is blocked with a matching IPS log and normal application tests still succeed.
Leave the signature set to monitor and call the alert a successful block contradicts the goal of ips monitor versus block. An IPS monitor action observes events but does not itself prevent the identified session from proceeding. A reliable alternative is Set the intended signature action to block on the matching IPS sensor and validate against authorized test traffic.
Incorrect Answers
The approved exploit test is blocked with a matching IPS log and normal application tests still succeed describes the required evidence of success, so it is not a risky change. The criterion verifies ips monitor versus block after implementation.
Set the intended signature action to block on the matching IPS sensor and validate against authorized test traffic is the appropriate remediation, not a shortcut that undermines it. It addresses the requirement because an IPS monitor action observes events but does not itself prevent the identified session from proceeding.
Inspect signature action, sensor policy association, event subtype and session result is a diagnostic step intended to establish the real cause rather than circumvent a safeguard. The technical mechanism is: An IPS monitor action observes events but does not itself prevent the identified session from proceeding.
Question 346
After enabling a broad IPS profile, CPU use increases and traffic latency rises sharply during busy periods. Which configuration or operational change most directly satisfies this requirement?
Explanation
Correct Answer
Intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load. CPU and latency return to targets while required test signatures remain active and detectable.
Incorrect Answers
Increase arbitrary session timeouts and assume the IPS scanning workload will decrease also leaves the required security or connectivity goal unmet. In this case intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load. Apply Identify the expensive signatures and traffic patterns, then tune the sensor or resource sizing without eliminating required protection. and verify the intended result.
The choice “Use a compatible deep SSL inspection path where policy and client trust permit encrypted URL-level visibility” concerns https url-path inspection limitation; it does not resolve the stated requirement. Intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load. Instead, identify the expensive signatures and traffic patterns, then tune the sensor or resource sizing without eliminating required protection.
“Disable all IPS checks globally because the CPU graph is high” would not meet the requirement. Intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load. Instead, identify the expensive signatures and traffic patterns, then tune the sensor or resource sizing without eliminating required protection.
Question 347
After enabling a broad IPS profile, CPU use increases and traffic latency rises sharply during busy periods. The problem remains after a proposed change. Which evidence should an administrator inspect first to isolate the relevant control-plane or data-plane cause?
Explanation
Correct Answer
Inspect IPS engine process metrics, session volumes, triggered signature statistics and policy scope is the most specific diagnostic for ips high-cpu performance troubleshooting. Intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load. These checks can distinguish a misconfiguration from a passing state before testing: CPU and latency return to targets while required test signatures remain active and detectable.
Incorrect Answers
Review contract, FortiGuard reachability, update errors, database versions and profile events is useful when investigating security profile update lifecycle, but it examines a different primary mechanism. Here the fault concerns ips high-cpu performance troubleshooting, so the first direct inspection is Inspect IPS engine process metrics, session volumes, triggered signature statistics and policy scope.
Inspect debug-flow matching policy, policy security profiles, session attributes and inspection event logs is useful when investigating security profile policy attachment, but it examines a different primary mechanism. Here the fault concerns ips high-cpu performance troubleshooting, so the first direct inspection is Inspect IPS engine process metrics, session volumes, triggered signature statistics and policy scope.
Compare the origin certificate chain, validity dates, inspection-profile invalid-certificate action and TLS logs is useful when investigating invalid upstream server certificate, but it examines a different primary mechanism. Here the fault concerns ips high-cpu performance troubleshooting, so the first direct inspection is Inspect IPS engine process metrics, session volumes, triggered signature statistics and policy scope.
Question 348
After enabling a broad IPS profile, CPU use increases and traffic latency rises sharply during busy periods. Following remediation, which observation is the strongest end-to-end evidence that this particular requirement has been met?
Explanation
Correct Answer
CPU and latency return to targets while required test signatures remain active and detectable is an acceptance criterion specific to ips high-cpu performance troubleshooting. Intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load.
Incorrect Answers
The prohibited path is blocked and the permitted path on the same site works in a controlled test can verify https url-path inspection limitation, but does not establish the required behavior for ips high-cpu performance troubleshooting. CPU and latency return to targets while required test signatures remain active and detectable.
The named application works under its approved exception and other applications remain under the required deep-inspection policy can verify certificate-pinned application exception, but does not establish the required behavior for ips high-cpu performance troubleshooting. CPU and latency return to targets while required test signatures remain active and detectable.
Only the approved vendor address gets the intended effective category and remains logged on access can verify category override for business url, but does not establish the required behavior for ips high-cpu performance troubleshooting. CPU and latency return to targets while required test signatures remain active and detectable.
Question 349
After enabling a broad IPS profile, CPU use increases and traffic latency rises sharply during busy periods. Which technical principle best explains why the appropriate remediation works?
Explanation
Correct Answer
Intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load. Identify the expensive signatures and traffic patterns, then tune the sensor or resource sizing without eliminating required protection.
Incorrect Answers
Web filter behavior is determined by the profile attached to the matching policy; category names alone do not identify the effective rule is relevant to web filter event policy attribution, but it does not explain the control required for ips high-cpu performance troubleshooting in this scenario. Instead, intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load.
Flow and proxy modes differ in processing and available inspection behaviors; feature requirements must drive the choice is relevant to proxy versus flow feature requirement, but it does not explain the control required for ips high-cpu performance troubleshooting in this scenario. Instead, intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load.
Category reputation controls act through the web filter profile on matching sessions, not through unrelated interface IP assignments is relevant to fortiguard web category policy, but it does not explain the control required for ips high-cpu performance troubleshooting in this scenario. Instead, intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load.
Question 350
After enabling a broad IPS profile, CPU use increases and traffic latency rises sharply during busy periods. Select TWO proposed actions that would undermine the required configuration, security boundary, or availability outcome.
Explanation
Correct Answer
Increase arbitrary session timeouts and assume the IPS scanning workload will decrease is also an unsafe shortcut for this particular scenario. Intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load. CPU and latency return to targets while required test signatures remain active and detectable.
Disable all IPS checks globally because the CPU graph is high contradicts the goal of ips high-cpu performance troubleshooting. Intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load. A reliable alternative is Identify the expensive signatures and traffic patterns, then tune the sensor or resource sizing without eliminating required protection.
Incorrect Answers
CPU and latency return to targets while required test signatures remain active and detectable describes the required evidence of success, so it is not a risky change. The criterion verifies ips high-cpu performance troubleshooting after implementation.
Identify the expensive signatures and traffic patterns, then tune the sensor or resource sizing without eliminating required protection is the appropriate remediation, not a shortcut that undermines it. It addresses the requirement because intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load.
Inspect IPS engine process metrics, session volumes, triggered signature statistics and policy scope is a diagnostic step intended to establish the real cause rather than circumvent a safeguard. The technical mechanism is: Intrusion detection processing cost depends on evaluated traffic and signatures; blanket disablement sacrifices security without isolating load.
Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests
- Fortinet NSE4_FGT_AD-7.6 Practice Test 33 - 10 Questions (Last Reviewed 20-Oct-2026)
- Fortinet NSE4_FGT_AD-7.6 Practice Test 34 - 10 Questions (Last Reviewed 19-Oct-2026)
- Fortinet NSE4_FGT_AD-7.6 Practice Test 35 - 10 Questions (Last Reviewed 18-Oct-2026)
- Fortinet NSE4_FGT_AD-7.6 Practice Test 36 - 10 Questions (Last Reviewed 17-Oct-2026)
- Fortinet NSE4_FGT_AD-7.6 Practice Test 37 - 10 Questions (Last Reviewed 16-Oct-2026)