Pass Cisco 500-220 Exam in First Attempt Guaranteed!
Get 100% Latest Exam Questions, Accurate & Verified Answers!
30 Days Free Updates, Instant Download!
Cisco 500-220 Practice Test 19
Question 180
At fictional Northlake Manufacturing, the Meraki solution architecture team is working while validating a controlled maintenance change. The Cisco Meraki operational problem is: An MX routes a new VLAN toward a downstream L3 switch but clients on that subnet cannot receive replies from the WAN. The collected evidence is: The MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. Which action PLUS independently testable outcome BEST fits these facts?
Explanation
Correct Answer
The case needs a change paired with a verifiable result: Add the documented static route or supported routing exchange and verify the gateway path in both directions. The acceptance result is a permitted test packet and response traverse the correct downstream L3 interface without route loops.
Incorrect Answers
A different action-and-verification pair is: Action: Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions. Independent confirmation: A scheduled link failure causes the expected alternate route to become active and critical sessions reestablish. It does not prove recovery from the documented condition: The MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop.
That alternative pair would assess: Action: Correct VLAN assignment and trunk allowed membership and apply approved port security for guest access. Independent confirmation: A guest test reaches permitted Internet destinations but cannot reach protected employee services. It does not resolve the specific finding that the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. The needed confirmation is a permitted test packet and response traverse the correct downstream L3 interface without route loops.
The competing proposal is: Action: Plan a high-density site survey, channel reuse, bandwidth and client distribution suited to the environment. Independent confirmation: Peak-load testing shows lower retries and acceptable per-client service without simply increasing AP transmit power. For this case, apply the specific action: Add the documented static route or supported routing exchange and verify the gateway path in both directions. Verify its effect with: A permitted test packet and response traverse the correct downstream L3 interface without route loops.
Question 181
At fictional Ashwater Engineering, the Meraki solution architecture team is working during a documented help-desk escalation. The Cisco Meraki operational problem is: An MX routes a new VLAN toward a downstream L3 switch but clients on that subnet cannot receive replies from the WAN. Evidence collected: The MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. Which narrowly scoped response BEST addresses the observed fault?
Explanation
Correct Answer
The MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. Routed networks need coherent forward and return reachability at every boundary. The focused correction is: Add the documented static route or supported routing exchange and verify the gateway path in both directions. Confirm it by checking that a permitted test packet and response traverse the correct downstream L3 interface without route loops.
Incorrect Answers
That alternative would address a different problem: Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions. Here, however, the evidence indicates the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. Routed networks need coherent forward and return reachability at every boundary.
A different proposed operation is: Correct VLAN assignment and trunk allowed membership and apply approved port security for guest access. That differs from the documented cause: The MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. The specific response should be: Add the documented static route or supported routing exchange and verify the gateway path in both directions.
This choice concerns another issue: Plan a high-density site survey, channel reuse, bandwidth and client distribution suited to the environment. The fault actually shown is the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. Verify the focused fix by checking a permitted test packet and response traverse the correct downstream L3 interface without route loops.
Question 182
At fictional Ashwater Engineering, the Meraki solution architecture team is working during a documented help-desk escalation. The Cisco Meraki operational problem is: An MX routes a new VLAN toward a downstream L3 switch but clients on that subnet cannot receive replies from the WAN. Which additional diagnostic observation MOST strongly distinguishes this cause from other faults?
Explanation
Correct Answer
The decisive observation is the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. Routed networks need coherent forward and return reachability at every boundary. It points to the action: Add the documented static route or supported routing exchange and verify the gateway path in both directions.
Incorrect Answers
That other observation concerns: Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. It is not the decisive fact in this case. The controlling evidence is: The MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop.
Another possible observation is: Port configuration and client addressing show a guest endpoint assigned to an employee VLAN on an untrusted edge. The record instead shows the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. This distinction matters because Routed networks need coherent forward and return reachability at every boundary.
Another possible finding is: RF utilization and retry measurements reveal co-channel contention despite high RSSI near each AP. For this incident, the direct diagnostic clue is the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop.
Question 183
At fictional Ashwater Engineering, the Meraki solution architecture team is working during a documented help-desk escalation. The Cisco Meraki operational problem is: An MX routes a new VLAN toward a downstream L3 switch but clients on that subnet cannot receive replies from the WAN. The team proposes the authorized response: Add the documented static route or supported routing exchange and verify the gateway path in both directions. Which independent result BEST confirms its success?
Explanation
Correct Answer
The direct acceptance test is: A permitted test packet and response traverse the correct downstream L3 interface without route loops. This tests the response against the finding that the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop.
Incorrect Answers
That result would verify another outcome: A scheduled link failure causes the expected alternate route to become active and critical sessions reestablish. It does not test the particular evidence the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. The needed result is: A permitted test packet and response traverse the correct downstream L3 interface without route loops.
A different check would show: A guest test reaches permitted Internet destinations but cannot reach protected employee services. It would not verify the required outcome, which is a permitted test packet and response traverse the correct downstream L3 interface without route loops.
That result would test a separate condition: Peak-load testing shows lower retries and acceptable per-client service without simply increasing AP transmit power. The case-specific acceptance test is: A permitted test packet and response traverse the correct downstream L3 interface without route loops.
Question 184
At fictional Ashwater Engineering, the Meraki solution architecture team is working during a documented help-desk escalation. The Cisco Meraki operational problem is: An MX routes a new VLAN toward a downstream L3 switch but clients on that subnet cannot receive replies from the WAN. The distinguishing evidence is: The MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. Which Meraki networking principle BEST explains the correct response?
Explanation
Correct Answer
Routed networks need coherent forward and return reachability at every boundary. That is why the reported condition—the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop—needs the specific response: Add the documented static route or supported routing exchange and verify the gateway path in both directions.
Incorrect Answers
A competing concept is: Dynamic routing requires valid neighbor state and consistent advertised reachability. It does not account for the specific observation: The MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. The applicable principle is: Routed networks need coherent forward and return reachability at every boundary.
The competing technical relationship is: Layer-two VLAN segmentation is effective only when ports and uplinks enforce intended membership. The distinction in the case is that Routed networks need coherent forward and return reachability at every boundary.
A different principle is: Dense WLAN performance is limited by shared airtime and interference, not only signal strength. It does not explain the deciding observation that the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. The relevant relationship is: Routed networks need coherent forward and return reachability at every boundary.
Question 185
At fictional Ashwater Engineering, the Meraki solution architecture team is working during a documented help-desk escalation. The Cisco Meraki operational problem is: An MX routes a new VLAN toward a downstream L3 switch but clients on that subnet cannot receive replies from the WAN. The collected evidence is: The MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. Which action PLUS independently testable outcome BEST fits these facts?
Explanation
Correct Answer
Under the documented condition—the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop—the bounded response is: Add the documented static route or supported routing exchange and verify the gateway path in both directions. An independent check is: A permitted test packet and response traverse the correct downstream L3 interface without route loops.
Incorrect Answers
That alternative pair would assess: Action: Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions. Independent confirmation: A scheduled link failure causes the expected alternate route to become active and critical sessions reestablish. It does not resolve the specific finding that the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop. The needed confirmation is a permitted test packet and response traverse the correct downstream L3 interface without route loops.
The competing proposal is: Action: Correct VLAN assignment and trunk allowed membership and apply approved port security for guest access. Independent confirmation: A guest test reaches permitted Internet destinations but cannot reach protected employee services. For this case, apply the specific action: Add the documented static route or supported routing exchange and verify the gateway path in both directions. Verify its effect with: A permitted test packet and response traverse the correct downstream L3 interface without route loops.
Another proposed action-and-test pair is: Action: Plan a high-density site survey, channel reuse, bandwidth and client distribution suited to the environment. Independent confirmation: Peak-load testing shows lower retries and acceptable per-client service without simply increasing AP transmit power. The evidence here is the MS switch advertises the subnet locally while the MX has no route back to that specific L3 next hop; the matching check is a permitted test packet and response traverse the correct downstream L3 interface without route loops.
Question 186
At fictional Pinecrest Museum, the Meraki solution architecture team is working while validating a controlled maintenance change. The Cisco Meraki operational problem is: Two Meraki-connected branches use routed handoffs but a failed peer remains preferred until routing adjacency recovers. Evidence collected: Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. Which narrowly scoped response BEST addresses the observed fault?
Explanation
Correct Answer
The case shows Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions. A separate test should confirm that a scheduled link failure causes the expected alternate route to become active and critical sessions reestablish.
Incorrect Answers
A different proposed operation is: Correct the supported HA cabling and L2/L3 topology before a controlled failover test. That differs from the documented cause: Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. The specific response should be: Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions.
This choice concerns another issue: Map the traffic enforcement points and apply the approved rule to the actual MX or MR policy path. The fault actually shown is Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. Verify the focused fix by checking a scheduled link failure causes the expected alternate route to become active and critical sessions reestablish.
The competing proposal is: Use a supported enterprise authentication and policy-based VLAN design for the clinical SSID with separate guest access. It does not correct the recorded finding that Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. The appropriate scoped change is: Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions.
Question 187
At fictional Pinecrest Museum, the Meraki solution architecture team is working while validating a controlled maintenance change. The Cisco Meraki operational problem is: Two Meraki-connected branches use routed handoffs but a failed peer remains preferred until routing adjacency recovers. Which additional diagnostic observation MOST strongly distinguishes this cause from other faults?
Explanation
Correct Answer
Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. That finding distinguishes the issue because Dynamic routing requires valid neighbor state and consistent advertised reachability. The matching correction is: Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions.
Incorrect Answers
Another possible observation is: The spare WAN is reachable yet the physical LAN topology omits the same downstream access VLAN path. The record instead shows Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. This distinction matters because Dynamic routing requires valid neighbor state and consistent advertised reachability.
Another possible finding is: Dashboard rule evaluation and test logs show an MR group policy path has different matches than the perimeter rule. For this incident, the direct diagnostic clue is Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover.
A competing observation would be: The access design has no identity-based role or VLAN isolation for authorized staff. That describes a different condition; the one documented here is: Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover.
Question 188
At fictional Pinecrest Museum, the Meraki solution architecture team is working while validating a controlled maintenance change. The Cisco Meraki operational problem is: Two Meraki-connected branches use routed handoffs but a failed peer remains preferred until routing adjacency recovers. The team proposes the authorized response: Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions. Which independent result BEST confirms its success?
Explanation
Correct Answer
Confirm the outcome with this result: A scheduled link failure causes the expected alternate route to become active and critical sessions reestablish. A completed configuration alone would not prove the issue behind Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover is resolved.
Incorrect Answers
A different check would show: The spare services the intended VLANs during failover and the pair returns to the documented role distribution. It would not verify the required outcome, which is a scheduled link failure causes the expected alternate route to become active and critical sessions reestablish.
That result would test a separate condition: A controlled disallowed test is blocked at the documented enforcement point while permitted services continue. The case-specific acceptance test is: A scheduled link failure causes the expected alternate route to become active and critical sessions reestablish.
That alternative tests: Authorized staff obtain their intended role and restricted clients cannot reach protected clinical systems. It does not establish that the documented condition has been corrected: Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. Use this acceptance criterion instead: A scheduled link failure causes the expected alternate route to become active and critical sessions reestablish.
Question 189
At fictional Pinecrest Museum, the Meraki solution architecture team is working while validating a controlled maintenance change. The Cisco Meraki operational problem is: Two Meraki-connected branches use routed handoffs but a failed peer remains preferred until routing adjacency recovers. The distinguishing evidence is: Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. Which Meraki networking principle BEST explains the correct response?
Explanation
Correct Answer
The evidence that Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover is best explained by this principle: Dynamic routing requires valid neighbor state and consistent advertised reachability.
Incorrect Answers
The competing technical relationship is: Redundant gateway appliances also need redundant reachable LAN and WAN paths. The distinction in the case is that Dynamic routing requires valid neighbor state and consistent advertised reachability.
A different principle is: MX and MR security controls operate at different positions and may use distinct match criteria. It does not explain the deciding observation that Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. The relevant relationship is: Dynamic routing requires valid neighbor state and consistent advertised reachability.
That competing principle concerns Enterprise wireless design can combine authenticated identity and network segmentation. The current case is governed by: Dynamic routing requires valid neighbor state and consistent advertised reachability.
Question 190
At fictional Pinecrest Museum, the Meraki solution architecture team is working while validating a controlled maintenance change. The Cisco Meraki operational problem is: Two Meraki-connected branches use routed handoffs but a failed peer remains preferred until routing adjacency recovers. The collected evidence is: Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. Which action PLUS independently testable outcome BEST fits these facts?
Explanation
Correct Answer
The appropriate response is: Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions. Then verify it against a scheduled link failure causes the expected alternate route to become active and critical sessions reestablish. Both steps concern the original finding: Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. Keep the scope controlled: Protocol support differs by MX platform, operating mode and firmware; confirm exact capabilities.
Incorrect Answers
The competing proposal is: Action: Correct the supported HA cabling and L2/L3 topology before a controlled failover test. Independent confirmation: The spare services the intended VLANs during failover and the pair returns to the documented role distribution. For this case, apply the specific action: Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions. Verify its effect with: A scheduled link failure causes the expected alternate route to become active and critical sessions reestablish.
Another proposed action-and-test pair is: Action: Map the traffic enforcement points and apply the approved rule to the actual MX or MR policy path. Independent confirmation: A controlled disallowed test is blocked at the documented enforcement point while permitted services continue. The evidence here is Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover; the matching check is a scheduled link failure causes the expected alternate route to become active and critical sessions reestablish.
Another action and check are: Action: Use a supported enterprise authentication and policy-based VLAN design for the clinical SSID with separate guest access. Independent confirmation: Authorized staff obtain their intended role and restricted clients cannot reach protected clinical systems. The pair does not directly address the record that Routing status shows a stale next-hop preference and missed neighbor updates after WAN failover. The corresponding correction is: Investigate the supported dynamic routing peer and failure timers, then restore the approved advertisement and convergence conditions.
Cisco Meraki Solutions Specialist (500-220) Practice Tests
- Cisco 500-220 Practice Test 17 - 10 Questions (Last Reviewed 31-Oct-2026)
- Cisco 500-220 Practice Test 18 - 10 Questions (Last Reviewed 30-Oct-2026)
- Cisco 500-220 Practice Test 19 - 10 Questions (Last Reviewed 29-Oct-2026)
- Cisco 500-220 Practice Test 20 - 10 Questions (Last Reviewed 28-Oct-2026)
- Cisco 500-220 Practice Test 21 - 10 Questions (Last Reviewed 27-Oct-2026)