Cisco 200-301 Practice Test 33 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 33

Question 320

Network review: After changing subnets, campus APs discover the WLC but their join transactions time out. Which TWO proposed shortcuts would be unsafe in this situation? Select TWO answers.

  1. For this switching domain, collect targeted evidence to inspect AP IP/default gateway, DNS or DHCP Option 43 discovery, WLC discovery logs, CAPWAP UDP 5246/5247 paths and time sync.
  2. For this switching domain, validate CAPWAP discovery, controller reachability and permitted join ports and credentials.
  3. For this switching domain, only change the wireless SSID name while ignoring controller management reachability.
  4. For this switching domain, block all CAPWAP traffic between AP and WLC and expect join to complete.
  5. For this switching domain, confirm the repair by checking that wLC shows the AP in joined state and correct site tags, and its SSIDs are advertised under the intended policy.

Explanation

Correct Answer

C:

After changing subnets, campus APs discover the WLC but their join transactions time out. “Only change the wireless SSID name while ignoring controller management reachability” would violate the requirement. Lightweight APs need controller discovery plus working management connectivity and successful CAPWAP join to receive centralized WLAN configuration.

D:

After changing subnets, campus APs discover the WLC but their join transactions time out. “Block all CAPWAP traffic between AP and WLC and expect join to complete” would violate the requirement. Lightweight APs need controller discovery plus working management connectivity and successful CAPWAP join to receive centralized WLAN configuration.

Incorrect Answers

A:

After changing subnets, campus APs discover the WLC but their join transactions time out. “collect targeted evidence to inspect AP IP/default gateway, DNS or DHCP Option 43 discovery, WLC discovery logs, CAPWAP UDP 5246/5247 paths and time sync” adds a relevant safeguard or verification step rather than weakening the solution. Lightweight APs need controller discovery plus working management connectivity and successful CAPWAP join to receive centralized WLAN configuration. Confirm that wLC shows the AP in joined state and correct site tags, and its SSIDs are advertised under the intended policy.

B:

“validate CAPWAP discovery, controller reachability and permitted join ports and credentials” is the controlled implementation, not an unsafe workaround. Lightweight APs need controller discovery plus working management connectivity and successful CAPWAP join to receive centralized WLAN configuration. Confirm that wLC shows the AP in joined state and correct site tags, and its SSIDs are advertised under the intended policy.

E:

“confirm the repair by checking that wLC shows the AP in joined state and correct site tags, and its SSIDs are advertised under the intended policy” adds a relevant safeguard or verification step rather than weakening the solution. Lightweight APs need controller discovery plus working management connectivity and successful CAPWAP join to receive centralized WLAN configuration. Confirm that wLC shows the AP in joined state and correct site tags, and its SSIDs are advertised under the intended policy.

Question 321

Consider this operational failure: A router has routes 10.0.0.0/8 via R1, 10.20.0.0/16 via R2 and 10.20.30.0/24 via R3; a packet targets 10.20.30.55. What should the administrator implement first?

  1. Forward using the matching route with the longest prefix length, /24 in these overlapping examples.
  2. Treat a default route as preferred over a more specific connected subnet.
  3. Choose the /8 aggregate because its network address is numerically lower.
  4. Choose the route with the lowest OSPF cost even if it matches a shorter prefix.

Explanation

Correct Answer

A:

The action 'Forward using the matching route with the longest prefix length, /24 in these overlapping examples.' directly addresses the longest-prefix-match forwarding requirement in this situation: A router has routes 10.0.0.0/8 via R1, 10.20.0.0/16 via R2 and 10.20.30.0/24 via R3; a packet targets 10.20.30.55. The relevant network mechanism is that iP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination. A successful change should show that show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination. To distinguish a genuine correction from a superficial change, inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.

Incorrect Answers

B:

“Treat a default route as preferred over a more specific connected subnet” does not implement the control that the facts call for. Instead, forward using the matching route with the longest prefix length, /24 in these overlapping examples.

C:

“Choose the /8 aggregate because its network address is numerically lower” does not implement the control that the facts call for. Instead, forward using the matching route with the longest prefix length, /24 in these overlapping examples.

D:

“Choose the route with the lowest OSPF cost even if it matches a shorter prefix” does not implement the control that the facts call for. Instead, forward using the matching route with the longest prefix length, /24 in these overlapping examples.

Question 322

While troubleshooting 'A router has routes 10.0.0.0/8 via R1, 10.20.0.0/16 via R2 and 10.20.30.0/24 via R3; a packet targets 10.20.30.55.', which underlying protocol rule should guide the decision?

  1. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.
  2. OSPF hello packets must match key adjacency parameters including the area ID; unequal area IDs block neighbor formation.
  3. OSPF peers on the same link must agree on hello and dead intervals; mismatches can prevent successful adjacency.
  4. An OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency.

Explanation

Correct Answer

A:

IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination. Show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

Incorrect Answers

B:

“OSPF hello packets must match key adjacency parameters including the area ID; unequal area IDs block neighbor formation” pertains to ospf area mismatch adjacency, not the deciding condition here. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

C:

“OSPF peers on the same link must agree on hello and dead intervals; mismatches can prevent successful adjacency” pertains to ospf hello, not the deciding condition here. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

D:

“An OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency” pertains to ospf duplicate router ids, not the deciding condition here. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

Question 323

Which measurable result should be checked before closing this ticket: A router has routes 10.0.0.0/8 via R1, 10.20.0.0/16 via R2 and 10.20.30.0/24 via R3; a packet targets 10.20.30.55.

  1. show ip ospf neighbor progresses to FULL and show ip ospf interface reports matching interval values.
  2. show ip ospf neighbor reports FULL and show ip ospf interface on both sides shows the same area.
  3. show ip ospf shows distinct router IDs on all routers, and stable FULL neighbors exchange expected LSAs.
  4. show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

Explanation

Correct Answer

D:

The observation 'show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.' specifically demonstrates a successful outcome for longest-prefix-match forwarding in this case: A router has routes 10.0.0.0/8 via R1, 10.20.0.0/16 via R2 and 10.20.30.0/24 via R3; a packet targets 10.20.30.55. That observation tests the underlying mechanism that iP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination. It is stronger evidence than a healthy unrelated service because it exercises the path affected by the remedy to forward using the matching route with the longest prefix length, /24 in these overlapping examples. If it fails, inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution. to isolate the remaining defect.

Incorrect Answers

A:

“Show ip ospf neighbor progresses to FULL and show ip ospf interface reports matching interval values” pertains to ospf hello, not the deciding condition here. Show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

B:

“Show ip ospf neighbor reports FULL and show ip ospf interface on both sides shows the same area” pertains to ospf area mismatch adjacency, not the deciding condition here. Show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

C:

“Show ip ospf shows distinct router IDs on all routers, and stable FULL neighbors exchange expected LSAs” pertains to ospf duplicate router ids, not the deciding condition here. Show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

Question 324

Before modifying more devices to address 'A router has routes 10.0.0.0/8 via R1, 10.20.0.0/16 via R2 and 10.20.30.0/24 via R3; a packet targets 10.20.30.55.', which diagnostic evidence is most relevant?

  1. Inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.
  2. Inspect show ip ospf interface, hello area identifiers and relevant process network statements.
  3. Inspect show ip ospf, neighbor identities, logs about duplicate IDs and the OSPF process restart state.
  4. Compare hello/dead values, network type, area and authentication on both neighbors using show ip ospf interface.

Explanation

Correct Answer

A:

The investigation 'Inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.' examines the variables most likely to explain longest-prefix-match forwarding in this situation: A router has routes 10.0.0.0/8 via R1, 10.20.0.0/16 via R2 and 10.20.30.0/24 via R3; a packet targets 10.20.30.55. Those checks are directly tied to the behavior that iP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination. The engineer can correlate this evidence with the expected outcome that show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination. and decide whether to forward using the matching route with the longest prefix length, /24 in these overlapping examples.

Incorrect Answers

B:

“Inspect show ip ospf interface, hello area identifiers and relevant process network statements” pertains to ospf area mismatch adjacency, not the deciding condition here. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

C:

“Inspect show ip ospf, neighbor identities, logs about duplicate IDs and the OSPF process restart state” pertains to ospf duplicate router ids, not the deciding condition here. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

D:

The choice “Compare hello/dead values, network type, area and authentication on both neighbors using show ip ospf interface” concerns ospf hello; it does not resolve the stated requirement. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

Question 325

A change board considers the issue 'A router has routes 10.0.0.0/8 via R1, 10.20.0.0/16 via R2 and 10.20.30.0/24 via R3; a packet targets 10.20.30.55.'. Identify the TWO decisions that should be rejected. Select TWO answers.

  1. Choose the route with the lowest OSPF cost even if it matches a shorter prefix.
  2. Collect targeted evidence to inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.
  3. Forward using the matching route with the longest prefix length, /24 in these overlapping examples.
  4. Choose the /8 aggregate because its network address is numerically lower.
  5. Confirm the repair by checking that show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

Explanation

Correct Answer

A:

“Choose the route with the lowest OSPF cost even if it matches a shorter prefix” would violate the requirement. The appropriate control instead is to forward using the matching route with the longest prefix length, /24 in these overlapping examples.

D:

“Choose the /8 aggregate because its network address is numerically lower” would violate the requirement. The appropriate control instead is to forward using the matching route with the longest prefix length, /24 in these overlapping examples.

Incorrect Answers

B:

“Collect targeted evidence to inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

C:

“Forward using the matching route with the longest prefix length, /24 in these overlapping examples” is the controlled implementation, not an unsafe workaround. Confirm that show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

E:

“Confirm the repair by checking that show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination” adds a relevant safeguard or verification step rather than weakening the solution.

Question 326

A network operator receives this ticket: A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7. Which configuration is best suited to the reported issue?

  1. For this routed path, choose the route with the lowest OSPF cost even if it matches a shorter prefix.
  2. For this routed path, treat a default route as preferred over a more specific connected subnet.
  3. For this routed path, choose the /8 aggregate because its network address is numerically lower.
  4. For this routed path, forward using the matching route with the longest prefix length, /24 in these overlapping examples.

Explanation

Correct Answer

D:

The action 'For this routed path, forward using the matching route with the longest prefix length, /24 in these overlapping examples.' directly addresses the longest-prefix-match forwarding requirement in this situation: A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7. The relevant network mechanism is that iP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination. A successful change should show that show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination. To distinguish a genuine correction from a superficial change, inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.

Incorrect Answers

A:

A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7. “Choose the route with the lowest OSPF cost even if it matches a shorter prefix” does not implement the control that the facts call for. Instead, forward using the matching route with the longest prefix length, /24 in these overlapping examples.

B:

A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7. “Treat a default route as preferred over a more specific connected subnet” does not implement the control that the facts call for. Instead, forward using the matching route with the longest prefix length, /24 in these overlapping examples.

C:

A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7. “Choose the /8 aggregate because its network address is numerically lower” does not implement the control that the facts call for. Instead, forward using the matching route with the longest prefix length, /24 in these overlapping examples.

Question 327

Which network-layer or protocol behavior most directly explains the result in this case: A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7.

  1. For this routed path, oSPF peers on the same link must agree on hello and dead intervals; mismatches can prevent successful adjacency.
  2. For this routed path, iP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.
  3. For this routed path, oSPF hello packets must match key adjacency parameters including the area ID; unequal area IDs block neighbor formation.
  4. For this routed path, an OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency.

Explanation

Correct Answer

B:

A network operator receives this ticket: A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination. Forward using the matching route with the longest prefix length, /24 in these overlapping examples.

Incorrect Answers

A:

The choice “oSPF peers on the same link must agree on hello and dead intervals; mismatches can prevent successful adjacency” concerns ospf hello; it does not resolve the stated requirement. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

C:

The choice “oSPF hello packets must match key adjacency parameters including the area ID; unequal area IDs block neighbor formation” concerns ospf area mismatch adjacency; it does not resolve the stated requirement. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

D:

The choice “an OSPF router ID is a unique 32-bit identifier for LSAs and neighbor identity; duplicates disrupt the link-state database and adjacency” concerns ospf duplicate router ids; it does not resolve the stated requirement. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

Question 328

After correcting 'A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7.', which observation is the strongest evidence that the specific requirement is met?

  1. For this routed path, show ip ospf neighbor reports FULL and show ip ospf interface on both sides shows the same area.
  2. For this routed path, show ip ospf shows distinct router IDs on all routers, and stable FULL neighbors exchange expected LSAs.
  3. For this routed path, show ip ospf neighbor progresses to FULL and show ip ospf interface reports matching interval values.
  4. For this routed path, show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

Explanation

Correct Answer

D:

A network operator receives this ticket: A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination. Forward using the matching route with the longest prefix length, /24 in these overlapping examples. The observable acceptance condition here is: Show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.

Incorrect Answers

A:

“Show ip ospf neighbor reports FULL and show ip ospf interface on both sides shows the same area” pertains to ospf area mismatch adjacency, not the deciding condition here. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

B:

“Show ip ospf shows distinct router IDs on all routers, and stable FULL neighbors exchange expected LSAs” pertains to ospf duplicate router ids, not the deciding condition here. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

C:

“Show ip ospf neighbor progresses to FULL and show ip ospf interface reports matching interval values” pertains to ospf hello, not the deciding condition here. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

Question 329

An operator is triaging the issue 'A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7.'. What should be inspected to isolate the actual cause?

  1. For this routed path, inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.
  2. For this routed path, inspect show ip ospf interface, hello area identifiers and relevant process network statements.
  3. For this routed path, inspect show ip ospf, neighbor identities, logs about duplicate IDs and the OSPF process restart state.
  4. For this routed path, compare hello/dead values, network type, area and authentication on both neighbors using show ip ospf interface.

Explanation

Correct Answer

A:

Inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution. IP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

Incorrect Answers

B:

The choice “inspect show ip ospf interface, hello area identifiers and relevant process network statements” concerns ospf area mismatch adjacency; it does not resolve the stated requirement. Inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.

C:

The choice “inspect show ip ospf, neighbor identities, logs about duplicate IDs and the OSPF process restart state” concerns ospf duplicate router ids; it does not resolve the stated requirement. Inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.

D:

The choice “compare hello/dead values, network type, area and authentication on both neighbors using show ip ospf interface” concerns ospf hello; it does not resolve the stated requirement. Inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.

Question 330

For this incident: A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this routed path, confirm the repair by checking that show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination.
  2. For this routed path, choose the /8 aggregate because its network address is numerically lower.
  3. For this routed path, choose the route with the lowest OSPF cost even if it matches a shorter prefix.
  4. For this routed path, collect targeted evidence to inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution.
  5. For this routed path, forward using the matching route with the longest prefix length, /24 in these overlapping examples.

Explanation

Correct Answer

B:

“Choose the /8 aggregate because its network address is numerically lower” would violate the requirement.

C:

“Choose the route with the lowest OSPF cost even if it matches a shorter prefix” would violate the requirement.

Incorrect Answers

A:

A branch has two overlapping routes 172.16.0.0/12 and 172.16.44.0/24 and sends traffic to 172.16.44.7. Which TWO practices introduce avoidable network risk. “confirm the repair by checking that show ip route lookup and traceroute select the /24 next hop and do not use the broader aggregate for the sample destination” adds a relevant safeguard or verification step rather than weakening the solution.

D:

“collect targeted evidence to inspect show ip route for the exact destination, prefix lengths, outgoing next hops and recursive resolution” adds a relevant safeguard or verification step rather than weakening the solution.

E:

“forward using the matching route with the longest prefix length, /24 in these overlapping examples” is the controlled implementation, not an unsafe workaround. An important verification is that iP longest-prefix match is evaluated before administrative distance and metric among routes that actually match the destination.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests