Cisco 200-301 Practice Test 1 - Prepaway
Practice Exams:

Pass Cisco 200-301 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers!

30 Days Free Updates, Instant Download!

Verified By Experts
Premium Bundle
$29.98
$79.99 $109.97

200-301 Premium Bundle


  • Premium File 760 Questions & Answers. Last update: Nov 10, 2026
  • Training Course 271 Lectures
  • Study Guide 1969 Pages

Cisco 200-301 Practice Test 1

Question 1

Consider this operational failure: A design office has hosts in 10.40.8.0/24 and servers in 10.40.9.0/24; a Layer 2-only access switch cannot forward between them. What should the administrator implement first?

  1. Expect a Layer 2 switch to route without an IP gateway or routed interface.
  2. Change the duplex setting without checking the Layer 3 next hop.
  3. Add the remote network's hosts to the same oversized access VLAN.
  4. Introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

Explanation

Correct Answer

D:

The action 'Introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.' directly addresses the router boundary between networks requirement in this situation: A design office has hosts in 10.40.8.0/24 and servers in 10.40.9.0/24; a Layer 2-only access switch cannot forward between them. The relevant network mechanism is that ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table. A successful change should show that a host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree. To distinguish a genuine correction from a superficial change, check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.

Incorrect Answers

A:

“Expect a Layer 2 switch to route without an IP gateway or routed interface” does not implement the control that the facts call for. Instead, introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

B:

“Change the duplex setting without checking the Layer 3 next hop” would not meet the requirement. Instead, introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

C:

“Add the remote network's hosts to the same oversized access VLAN” does not implement the control that the facts call for. Instead, introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

Question 2

While troubleshooting 'A design office has hosts in 10.40.8.0/24 and servers in 10.40.9.0/24; a Layer 2-only access switch cannot forward between them.', which underlying protocol rule should guide the decision?

  1. Controller-managed WLANs separate centralized policy and management from the radio access point's client-facing RF service.
  2. Optics are engineered for particular fiber cores, distances and wavelengths; a link can fail even if connectors physically fit.
  3. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.
  4. Collapsed-core designs combine core and distribution functions, while spine-leaf fabrics use a consistent leaf-to-spine forwarding structure and equal-cost paths.

Explanation

Correct Answer

C:

A design office has hosts in 10.40.8.0/24 and servers in 10.40.9.0/24; a Layer 2-only access switch cannot forward between them. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table. A host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.

Incorrect Answers

A:

The choice “Controller-managed WLANs separate centralized policy and management from the radio access point's client-facing RF service” concerns wireless ap; it does not resolve the stated requirement. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

B:

The choice “Optics are engineered for particular fiber cores, distances and wavelengths; a link can fail even if connectors physically fit” concerns fiber mode; it does not resolve the stated requirement. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

D:

“Collapsed-core designs combine core and distribution functions, while spine-leaf fabrics use a consistent leaf-to-spine forwarding structure and equal-cost paths” would not be the most direct first check for this failure. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

Question 3

Which measurable result should be checked before closing this ticket: A design office has hosts in 10.40.8.0/24 and servers in 10.40.9.0/24; a Layer 2-only access switch cannot forward between them.

  1. Traffic follows intended redundant links with acceptable convergence, and topology diagrams show the chosen hierarchy or fabric connectivity.
  2. Both ends negotiate the intended rate with stable optical receive power and negligible interface CRC or signal faults.
  3. The intended SSID and security policy appear consistently on joined APs, and authenticated clients roam using the same authorized WLAN.
  4. A host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.

Explanation

Correct Answer

D:

A host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree. Introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

Incorrect Answers

A:

“Traffic follows intended redundant links with acceptable convergence, and topology diagrams show the chosen hierarchy or fabric connectivity” alone does not establish all the required behavior. A host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.

B:

The choice “Both ends negotiate the intended rate with stable optical receive power and negligible interface CRC or signal faults” concerns fiber mode; it does not resolve the stated requirement. A host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.

C:

“The intended SSID and security policy appear consistently on joined APs, and authenticated clients roam using the same authorized WLAN” pertains to wireless ap, not the deciding condition here. A host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.

Question 4

Before modifying more devices to address 'A design office has hosts in 10.40.8.0/24 and servers in 10.40.9.0/24; a Layer 2-only access switch cannot forward between them.', which diagnostic evidence is most relevant?

  1. Inspect AP join status, WLC WLAN profile, mapped policy profile, RF state and client association details.
  2. Check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.
  3. Trace physical uplinks, check routed adjacency and ECMP entries, compare oversubscription and failure domains.
  4. Inspect optic model and DOM optical power, fiber type, patch polarity, connector cleanliness and show interface counters.

Explanation

Correct Answer

B:

A design office has hosts in 10.40.8.0/24 and servers in 10.40.9.0/24; a Layer 2-only access switch cannot forward between them. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table. A host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree. The direct diagnostic here is: Check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.

Incorrect Answers

A:

The choice “Inspect AP join status, WLC WLAN profile, mapped policy profile, RF state and client association details” concerns wireless ap; it does not resolve the stated requirement. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

C:

“Trace physical uplinks, check routed adjacency and ECMP entries, compare oversubscription and failure domains” would not be the most direct first check for this failure. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

D:

The choice “Inspect optic model and DOM optical power, fiber type, patch polarity, connector cleanliness and show interface counters” concerns fiber mode; it does not resolve the stated requirement. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

Question 5

A change board considers the issue 'A design office has hosts in 10.40.8.0/24 and servers in 10.40.9.0/24; a Layer 2-only access switch cannot forward between them.'. Identify the TWO decisions that should be rejected. Select TWO answers.

  1. Expect a Layer 2 switch to route without an IP gateway or routed interface.
  2. Introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.
  3. Confirm the repair by checking that a host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.
  4. Add the remote network's hosts to the same oversized access VLAN.
  5. Collect targeted evidence to check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.

Explanation

Correct Answer

A:

“Expect a Layer 2 switch to route without an IP gateway or routed interface” would violate the requirement.

D:

“Add the remote network's hosts to the same oversized access VLAN” would violate the requirement.

Incorrect Answers

B:

“Introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy” is the controlled implementation, not an unsafe workaround. An important verification is that a host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.

C:

“Confirm the repair by checking that a host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that a host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.

E:

“Collect targeted evidence to check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that a host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.

Question 6

A network operator receives this ticket: A warehouse adds an IoT subnet 172.20.12.0/24 alongside 172.20.13.0/24; devices reach local peers but not hosts in the other subnet. Which configuration is best suited to the reported issue?

  1. For this LAN, add the remote network's hosts to the same oversized access VLAN.
  2. For this LAN, change the duplex setting without checking the Layer 3 next hop.
  3. For this LAN, introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.
  4. For this LAN, expect a Layer 2 switch to route without an IP gateway or routed interface.

Explanation

Correct Answer

C:

The action 'For this LAN, introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.' directly addresses the router boundary between networks requirement in this situation: A warehouse adds an IoT subnet 172.20.12.0/24 alongside 172.20.13.0/24; devices reach local peers but not hosts in the other subnet. The relevant network mechanism is that ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table. A successful change should show that a host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree. To distinguish a genuine correction from a superficial change, check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.

Incorrect Answers

A:

A warehouse adds an IoT subnet 172.20.12.0/24 alongside 172.20.13.0/24; devices reach local peers but not hosts in the other subnet. “Add the remote network's hosts to the same oversized access VLAN” does not implement the control that the facts call for. Instead, introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

B:

A warehouse adds an IoT subnet 172.20.12.0/24 alongside 172.20.13.0/24; devices reach local peers but not hosts in the other subnet. “Change the duplex setting without checking the Layer 3 next hop” would not meet the requirement. Instead, introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

D:

A warehouse adds an IoT subnet 172.20.12.0/24 alongside 172.20.13.0/24; devices reach local peers but not hosts in the other subnet. “Expect a Layer 2 switch to route without an IP gateway or routed interface” does not implement the control that the facts call for. Instead, introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

Question 7

Which network-layer or protocol behavior most directly explains the result in this case: A warehouse adds an IoT subnet 172.20.12.0/24 alongside 172.20.13.0/24; devices reach local peers but not hosts in the other subnet.

  1. For this LAN, optics are engineered for particular fiber cores, distances and wavelengths; a link can fail even if connectors physically fit.
  2. For this LAN, collapsed-core designs combine core and distribution functions, while spine-leaf fabrics use a consistent leaf-to-spine forwarding structure and equal-cost paths.
  3. For this LAN, ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.
  4. For this LAN, controller-managed WLANs separate centralized policy and management from the radio access point's client-facing RF service.

Explanation

Correct Answer

C:

Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

Incorrect Answers

A:

“Optics are engineered for particular fiber cores, distances and wavelengths; a link can fail even if connectors physically fit” pertains to fiber mode, not the deciding condition here. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

B:

“Collapsed-core designs combine core and distribution functions, while spine-leaf fabrics use a consistent leaf-to-spine forwarding structure and equal-cost paths” alone does not establish all the required behavior. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

D:

“Controller-managed WLANs separate centralized policy and management from the radio access point's client-facing RF service” pertains to wireless ap, not the deciding condition here. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

Question 8

After correcting 'A warehouse adds an IoT subnet 172.20.12.0/24 alongside 172.20.13.0/24; devices reach local peers but not hosts in the other subnet.', which observation is the strongest evidence that the specific requirement is met?

  1. For this LAN, both ends negotiate the intended rate with stable optical receive power and negligible interface CRC or signal faults.
  2. For this LAN, traffic follows intended redundant links with acceptable convergence, and topology diagrams show the chosen hierarchy or fabric connectivity.
  3. For this LAN, a host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.
  4. For this LAN, the intended SSID and security policy appear consistently on joined APs, and authenticated clients roam using the same authorized WLAN.

Explanation

Correct Answer

C:

Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table. If this test fails, check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.

Incorrect Answers

A:

The choice “both ends negotiate the intended rate with stable optical receive power and negligible interface CRC or signal faults” concerns fiber mode; it does not resolve the stated requirement. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

B:

“Traffic follows intended redundant links with acceptable convergence, and topology diagrams show the chosen hierarchy or fabric connectivity” alone does not establish all the required behavior. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

D:

The choice “the intended SSID and security policy appear consistently on joined APs, and authenticated clients roam using the same authorized WLAN” concerns wireless ap; it does not resolve the stated requirement. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

Question 9

An operator is triaging the issue 'A warehouse adds an IoT subnet 172.20.12.0/24 alongside 172.20.13.0/24; devices reach local peers but not hosts in the other subnet.'. What should be inspected to isolate the actual cause?

  1. For this LAN, trace physical uplinks, check routed adjacency and ECMP entries, compare oversubscription and failure domains.
  2. For this LAN, inspect optic model and DOM optical power, fiber type, patch polarity, connector cleanliness and show interface counters.
  3. For this LAN, inspect AP join status, WLC WLAN profile, mapped policy profile, RF state and client association details.
  4. For this LAN, check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.

Explanation

Correct Answer

D:

Check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts. Ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

Incorrect Answers

A:

“Trace physical uplinks, check routed adjacency and ECMP entries, compare oversubscription and failure domains” would not be the most direct first check for this failure. Check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.

B:

The choice “inspect optic model and DOM optical power, fiber type, patch polarity, connector cleanliness and show interface counters” concerns fiber mode; it does not resolve the stated requirement. Check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.

C:

The choice “inspect AP join status, WLC WLAN profile, mapped policy profile, RF state and client association details” concerns wireless ap; it does not resolve the stated requirement. Check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.

Question 10

For this incident: A warehouse adds an IoT subnet 172.20.12.0/24 alongside 172.20.13.0/24; devices reach local peers but not hosts in the other subnet. Which TWO practices introduce avoidable network risk? Select TWO answers.

  1. For this LAN, confirm the repair by checking that a host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree.
  2. For this LAN, add the remote network's hosts to the same oversized access VLAN.
  3. For this LAN, collect targeted evidence to check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts.
  4. For this LAN, expect a Layer 2 switch to route without an IP gateway or routed interface.
  5. For this LAN, introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

Explanation

Correct Answer

B:

“Add the remote network's hosts to the same oversized access VLAN” would violate the requirement. The appropriate control instead is to introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

D:

“Expect a Layer 2 switch to route without an IP gateway or routed interface” would violate the requirement. The appropriate control instead is to introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy.

Incorrect Answers

A:

“confirm the repair by checking that a host reaches a remote-subnet destination through its configured on-link gateway, and routing and return-path entries agree” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

C:

“collect targeted evidence to check ipconfig or ip route on the client, ARP to the gateway, show ip interface brief, show ip route, and ACL hit counts” adds a relevant safeguard or verification step rather than weakening the solution. Confirm that ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

E:

“introduce a correctly addressed Layer 3 gateway with routes and allow inter-subnet traffic under policy” is the controlled implementation, not an unsafe workaround. Confirm that ethernet switches forward frames inside a broadcast domain; a router or routed switch selects next hops between IP prefixes using the routing table.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests